SR22DET wrote:I realy dont know if it help u buud but heres a link to some pillars:http://takakaira.com/asp/templ...mipLk
Did you take a second to look at which way those gauges point?
Gauge pod and gauges for an s13?
-
BuudWeizErr
- Posts: 4745
- Joined: Tue Sep 24, 2002 11:35 am
Omori USA makes a really nice single DIN pannel that is angled but they are currently at odds with their supplier. The omori site is worth checking out tho. Lots of cool stuff.
http://www.omori-na.com
http://www.omori-na.com
http://www.egauges.com/vdo_acc...Cart=
see if that works...If not go to http://www.eguages.com and then thourh the VW din pannel link. there is a universal din pannel there.
see if that works...If not go to http://www.eguages.com and then thourh the VW din pannel link. there is a universal din pannel there.
-
firefighter81
- Posts: 22
- Joined: Thu Jun 12, 2003 11:10 pm
Ok Guys.. dragging up this old thread to see if someone is interested in a possible group buy. The idea would be Full pillar replacement triple pod. Let me know if you are interested. They say average is 40-60 dollars. Here are details of the project:
Attention car clubs and Internet forum groups. We can manufacture custom gauge holders for your vehicle. Prices starting at just $20 for single pods. Full-length pillars as low as $39.
Minimum order quantity is 30 per project. Some models may require a higher minimum. If both double and triple gauge holders are requested, this represents two projects and consequently, requires 30 pre-paid units each. All orders must be paid prior to project start. Pricing will be determined after receipt of OEM part for evaluation. Most of our products range from $40-$60 ea. Shipping charges and color matching is extra.
REQUIREMENTS:
Name, address, and contact information of project leader. Follow-up will be with project leader only. (Please do not have others call for status)
OEM part from project leader. This will be used for fabricating the mold and is non-returnable.
Make, model and year range specifications.
Color samples (at least 4"x4" sample) of all colors to be painted.
Gauge Size requested (usually 2 1/16" and/or 60mm). Note: some models may not accomodate 60mm gauges due to width limitations.
PRODUCTION SCHEDULE:
Rough mock-up will be made and sent to project leader. Project leader test-fits mock-up - checking for clearance problems and angle of gauges. Project leader returns the mockup with any modifications and approves the design.
Mold-making process - approx 4-5 weeks
Initial production run - approx 3-4 weeks
Finishing and shipping - approx 1 week after product availability.
*******IMPORTANT********
PRODUCTION SCHEDULING IS COMPLEX AND DELAYS ARE NOT UNCOMMON DUE TO THE NUMBER OF PROJECTS AHEAD OF YOURS, MATERIAL LEAD-TIME, ETC. WE DO OUR BEST TO PROVIDE A RESONABLE ESTIMATE OF DELIVERY TIMES - HOWEVER, WE CANNOT GAURANTEE A DELIVERY DATE.
Email me if interested, need 30.
Attention car clubs and Internet forum groups. We can manufacture custom gauge holders for your vehicle. Prices starting at just $20 for single pods. Full-length pillars as low as $39.
Minimum order quantity is 30 per project. Some models may require a higher minimum. If both double and triple gauge holders are requested, this represents two projects and consequently, requires 30 pre-paid units each. All orders must be paid prior to project start. Pricing will be determined after receipt of OEM part for evaluation. Most of our products range from $40-$60 ea. Shipping charges and color matching is extra.
REQUIREMENTS:
Name, address, and contact information of project leader. Follow-up will be with project leader only. (Please do not have others call for status)
OEM part from project leader. This will be used for fabricating the mold and is non-returnable.
Make, model and year range specifications.
Color samples (at least 4"x4" sample) of all colors to be painted.
Gauge Size requested (usually 2 1/16" and/or 60mm). Note: some models may not accomodate 60mm gauges due to width limitations.
PRODUCTION SCHEDULE:
Rough mock-up will be made and sent to project leader. Project leader test-fits mock-up - checking for clearance problems and angle of gauges. Project leader returns the mockup with any modifications and approves the design.
Mold-making process - approx 4-5 weeks
Initial production run - approx 3-4 weeks
Finishing and shipping - approx 1 week after product availability.
*******IMPORTANT********
PRODUCTION SCHEDULING IS COMPLEX AND DELAYS ARE NOT UNCOMMON DUE TO THE NUMBER OF PROJECTS AHEAD OF YOURS, MATERIAL LEAD-TIME, ETC. WE DO OUR BEST TO PROVIDE A RESONABLE ESTIMATE OF DELIVERY TIMES - HOWEVER, WE CANNOT GAURANTEE A DELIVERY DATE.
Email me if interested, need 30.
http://www.gaugepods.com i think it was, im at work right now don't have the bookmark on hand..
