Garrett gt2560r

[cheap_sticker05]

I need a new turbo bad. Mine is spewing oil pretty bad. After searching this seems like the best match to me. I want to know if this is a good choice to get me to 250hp. Will I have any fitment issues with this turbo? I probably have more questions that I will post up later. Right now I just need some assurance that this will work before I order it.

http://www.turbobygarrett.com/...4.htm

Rich-

[mikesim]

http://cheapturbo.stores.yahoo.net/gagttu.html

get the GT28R or the GT28RS. if you can afford a new manifold and turbo lines, i'd recommend switching to a T3/T04E 57 trim .48AR turbo.

http://cheapturbo.stores.yahoo....html

my friend has that specific one on his integra and made 267whp at 10 psi. because his bottom end is stock, he won't push it further. with our CA's, you can push 15psi daily with the proper intercooler, fuel system upgrades and tuning.

[cheap_sticker05]

does anyone have experience with the turbo mentioned above? What about running and adapter like this on the stock manifold to run that?http://www.horsepowerinabox.co...l.jpg

[The_Chosen_One]

The GT2560R is the real name of the GT28R. The GT28R bolts on to the stock manifold. I had one but I switched over to a GTi-R T28

[cheap_sticker05]

does anyone know the garret part# for a GTi-R turbo? Is there any advantage over the gt2560r (gt28r) and the GTi-R turbo?

[The_Chosen_One]

Here ya go this should cover everything you need to know.

zerothread?id=238614

Heres a direct link to it.

http://cheapturbo.stores.yahoo.net/garrettt28.html

the picture they have is a generic one, it comes like the one I put in that link.

Also advantage, you can rebuild and it flows 2 lb/min more than the GT28R (GT2560R)

[r34 gtr]

either way you cant really go too wrong.