Finished!

[cyris3d]

Finally finished with my swap.. didnt take too long after the wiring was done... Soo far im pretty happy with it.... Still a lil things here and there im werking on.. ITs getting hot.. im using the stock KA radiator.. and the temps getting to 220-230... sooo gonna get a dual core.. Also Seems like it is running really rich.. gotta play with the timing.. its retarded a bit....and last is the Tach.. we hooked up my auto meter.. and its not getting any signal....

But all and all.. at 10lbs.. it fells really good.. with the 245 nitto 555s on the rear.. and Skyline LSD.. it hooks hard..

IM gonna take some pics real soon....

Gotta get ready for the Track this friday.. soo we can see what it does.. NiGhts Suposedly went 12.6 on stock boost and street tires... but.. i dont think its possible... hoping for low 13s on 10lbs.. we'll see what happens..

Anyone else run their car at the track yet? any times?

-Justin :ylsuper 240sxRb25DETHybrid FMICSKyline LSD

[spec-v5150]

Congrats. Don't know too much on the RB25, but check out my thread on aftermarket tach. It may work for you too, Also what did you do for FMIC piping????

[krayton]

Nice job. Looking forward to your pics.

Oh, where did you get your intercooler? Im in the market for one right now

[93RPS13]

sweet! i hope we see pics

[Bryson]

It looks like a Powerdigger HYBRID intercooler... you can get them from.. Cameron BAAAH HAHAHHAAAA!!!....no really though there are a lot of people who sell them on EBAY they are somehwere between 4 and 5 hundred bucks. They come from australia and are suppose to be pretty damn good.

[cyris3d]

yea. its a Hybrid power digger FMIC.. it werks really well.. 3inch in and outlets.. I did get it from Camron as well as my clip..

pics tonite

[jEzTeR]

NICE! I can't wait to see some pics.Be carefull at the track no use tearing it up so soon.

[Bryson]

cool cyris3d.. I've talked to Cameron so ya I am thinkin I might get one from him too if things work out right.

[jojothemonkey]

Have I missed something here, I thought that no one got their clips from Cammeron!?

[Bryson]

well.. like 3 people have in the history of clips.. Crysid did, another guy in florida did.. and another person did. I talked to Cameron on the phone yesterday so hopefully things will be fixed soon and I'll get mine soon.

[jojothemonkey]

well at least he is starting to get people their sh*t

[Bryson]

no not yet nobody has. don't get too far ahead now. But I did have a good talk to him and as long as what he says is the truth then things should work out.

[Bryson]

I take that back.. the people who got their clips BEFORE the troubles began did get their stuff. But non of the people from the current posts concerning it have.

[cyris3d]

i was the first person to ever order a clip from camorn.. I was told it was gonna be in great shape.. the brakes were gonna be on it.. The drive shaft was gonna be with it.. the LSD and half shafts were gonna be with it too..

It showed up..

It was pretty ****ing beat.. everything else that was spodda be with it didnt come.. the ECU was rusted (seeems ok, At the moment).. the compression was low..130-145-125-135-130-130 ( big day comes friday for the compression test after driving it for a week.) I finally had to call Venus, who he ordered it from, I had to ***** them out to get my LSD, axles, and drive shaft..

[Bryson]

ya he told me about that he said his first two customer orders were through Venus so he never went through em again

[Bryson]

u probably coulda gotten a whole new block if u *****ed enuf apparently most people are going thru them now and thats what they do if the stuff is messed

[cyris3d]

if the compression is still low... im deffinitly gonna do something about it.. either thru them or camron..

[Bryson]

well if you gimme your real name I can mention it to him when I talk to him in a day or two. I am basically th eonly one who can reach him at the moment. As far as that goes, you'd have better luck going thru Venus direct. Cameron has a lot to fix at the moment with us who have gotten nothing.

[spec-v5150]

i was the first person to ever order a clip from camorn.. I was told it was gonna be in great shape.. the brakes were gonna be on it.. The drive shaft was gonna be with it.. the LSD and half shafts were gonna be with it too..

It showed up..

It was pretty ****ing beat.. everything else that was spodda be with it didnt come.. the ECU was rusted (seeems ok, At the moment).. the compression was low..130-145-125-135-130-130 ( big day comes friday for the compression test after driving it for a week.) I finally had to call Venus, who he ordered it from, I had to ***** them out to get my LSD, axles, and drive shaft..

Venus auto sent you....THAT. That is down right horrible. That doesnt even look like a clip.

[jojothemonkey]

Well I stand corrected. But yeah that clip is pretty jacked up looking...

[93RPS13]

so cyris3d what happened before with the shifter a little forward, how did you fix it??

[Wuss]

VEnus auto didnt send him anything, Night did. Why was he reselling stuff from Venus anyways? Wouldn't it have been cheaper just to go to venus? And the you don't have to deal with " well, night said that you said..." crap.

[JCAP_Tuning]

what parts did you use from the R33 to use the Skyline LSD?

[cosmo]

It showed up..

AAAHHH!!!!! What the hell is that thing!!!!

[Jamison]

hey cyris3d,

where did you get the wiring info from to wire up your engine? I am starting on the wiring with my swap now and I dont even know where to start, what harness's to use or anyhting?!?

if its not to much trouble, can you do a write up on it?, or let me know where you found out what to do? thanks.

[spec-v5150]

VEnus auto didnt send him anything, Night did. Why was he reselling stuff from Venus anyways? Wouldn't it have been cheaper just to go to venus? And the you don't have to deal with " well, night said that you said..." crap.

Ummm it isnt umcomon for said importer to source a clip from another importer. I had a uy at a shop tell me that. Underground motorsports I bleive. They advertise at 240sxforums. He said Venus is the number one importer of the RB series engine. He also said that a good 90% of RB sellers get their clips from Venus. Secondly, I am sure he didnt flat out say hey , I am getting your clip from Venus. If he did, anyone who bought from him got dooped, because they probably paid 3000+ for a clip that is in the 2000+ range at Venus. Third since he got that clip from Venus, Venus indirectly sent him that garbage thing called a front clip

[JCAP_Tuning]

Thats funny, we must be part of the 10% that get ours direct. I didnt realize the percentages were that high. Oh well.

[cyris3d]

run down of my car... just got my cam back.. so will post full new pics soon

http://www.trevtec.com/rbswap/rb25swap.html

[wcbjr]

Nice project you got going there.

Does that Walbro fuel pump drop right in? I don't want to have to swap a full VG30DETT assembly.Did you have to fabricate custom oil and water lines for the turbo? Is that your average T3/T04 Garrett turbo?

[FAST-DATSUN]

The Auto Meter tack needs a adapter to work on the RB motor!!!!