Favorite rear spoiler for the M37 and M56

[nuck]

There are a lot of inexpensive prepainted ones out there and they all look kind of similar. Who has bought, or is going to buy?

[Ilya]

Stock is best IMO.

[nuck]

Yeah I didn't realize painted stock could be had for under $200 so no need to go aftermarket with that look. I might be interested in a slightly more aggressive one though.

[John2]

I searched quite a bit, but couldn't find a non-stock one that I felt real good about. By that I mean the pictures weren't great, I was never sure of the mounting, suppliers in Russia, etc. So I ended up getting the stock one, pre-painted, off of eBay.

[wideopn11]

how-to-2011-m37-m56-oem-rear-deck-spoil ... 88253.html

[GMBQ70]

Great post on the install - Thanks wideopn11! I May have to install one of these myself.

[armybrat]

Yep the stock pre-painted one is the way to go. The DIY posted here is spot on. Only thing I recommend is using unibits, AKA step drill bits, in place of a standard drill bit. They drill a much nicer hole in thin sheet metal than standard 2-fluted bits.