Ebay intercooler kit....

[onevia1800cc]

i hit major boost spike last night with this fmic kit. i usae to uverboost about 9 psi( 2 notches above .5 bar) now im hitting like 2 notches below 1.0 bar LMAO i know this isnt good and i neewd to take it easy until i get a MBC, anyknow having this same isssue? or heard of it. also im not using the boost control solemoid and i run vac off of the turbo

brandon

i have the same setup (WG-turbo) i havent spiked yetsame reading 2 notches above .5 bar

[c-rad]

thanks but what am i supposed to say when i email deedee because i don't know what i should say?

should i say some thing like i want your ca18det fmic how much money should i send you because i heard other people saying that they got it from you for $250

is that what im supposed to say?

what did you say?

i want to email her today because i really need a fmic

Email [email protected] Her name is Tammie. Ask her if you can purchase the CA18DET FMIC KIT for $250 + $44 insured shipping as a few others have done so. She should email you back with the rest of the instructions.

[slideways]

she told me 295+ shipping and it came out to 338.44

[ca18detdrift]

she told me 295+ shipping and it came out to 338.44

Thats the EXACT same thing that happened to me. wonder why some people get it cheaper?

[float_6969]

Because you're not as Pretty as c-rad is, that's why!

[rchboy]

probably because crad and i were some of the first to get it at that price

[em55ery]

she just tried telling me 425 shipped! unless she made a typo.. which i doubt

[float_6969]

AAAHHHHH, supply and demand. I love it!!!

[slownslurious]

I remember with the ka24DE manifolds they sold a handful at first for pretty cheap because they were not production manifolds, they were preproduction (they said the welds weren't robotic, etc)...its POSSIBLE that they might have shipped them some sort of preproduction kits, not likely, but I'm just posting it as a theory.

[em55ery]

pfff deedee can rot for all i care.. i just got one off ebay for 295. take that supply and demand

[float_6969]

There ya go em55ery!!! DAMN THE MAN! POWER TO THE PEOPLE!!!

[em55ery]

^^^^^^^^HAHAHAH LMFAO

[em55ery]

what are you guys doing for your bov situation.. new hotpipe. or are you welding a flange into the ssa hotpipe. i want to use the hks ssqv. whats my best bet?

[onevia1800cc]

i just welded mine

i know i know i need to clean my engine bay

[biosehnsucht]

you need a bigger rad man! go bling a koyo 53mm KA radiator like me

[onevia1800cc]

i know i can fit like 3 of those calsonic ones

[slideways]

wonder why u didnt relocate the valve on your coldpipe? anyhow looks good man ahha a lot better than my janky ghetto rigged coldpipe.

[c-rad]

wonder why u didnt relocate the valve on your coldpipe? anyhow looks good man ahha a lot better than my janky ghetto rigged coldpipe.

I've always wondered, where does the small hose coming off the cold pipe attach to???

[S13Silvia917]

wonder why u didnt relocate the valve on your coldpipe? anyhow looks good man ahha a lot better than my janky ghetto rigged coldpipe.

hey u seem to have an s13 front, did u have any fitment issues with the cooler being to high up and not clearing the brackets or headlight? this is happenning to me and i dont know if i should use another bracket for the top mounting point so it can lower the cooler about an inch. can u get me some pics of how it sits by the headlights plz.thnx

[mbmbmb23]

Here's my latest pick-up: http://cgi.ebay.com/ebaymotors...%3AIT

Thing came with a BOV too.....

[slideways]

yeah it hits my headlights slightly. but whatever i jsut bolted it down and shazam it was fine... ill try and get pics tomorow.

brandon

[S13Silvia917]

yeah it hits my headlights slightly. but whatever i jsut bolted it down and shazam it was fine... ill try and get pics tomorow.

brandon

do u have any pics, or were ur headlight on and then u bolted up the cooler?

[CaEric]

ssauto still didnt get the ca18 ic piping right dammit but other then that iam happy with it

[CaEric]

Is that the ssauto fmic kit ? also can u give specs on how far down the pipe i split it to weld in the new section

[Kouks]

Well I guess Im gonna order a FMIC from them now, I cant find a shop to make me piping for cheaper than 550. F That. Ill just buy that kit and then sell my MR FM.

I wish they would put the s14 sr coldpipe on there.
Modified by Kouks at 8:33 AM 5/31/2006

[Ca_laurier]

i just got mine 2 weeks ago, still have to install it.

so how is everyone liking theres. any pressure drops or anything?

[c-rad]

i just got mine 2 weeks ago, still have to install it.

so how is everyone liking theres. any pressure drops or anything?

All intercoolers cause a pressure drop. Its just a matter of how much. Kinda tough to tell without having a super accurate boost gauge connected to both sides of the intercooler.

[mbmbmb23]

Well I guess Im gonna order a FMIC from them now, I cant find a shop to make me piping for cheaper than 550. F That. Ill just buy that kit and then sell my MR FM.

I wish they would put the s14 sr hotpipe on there.

You mean S14 cold pipe? I bought their S14 SR kit and am using a Greddy S13 hotpipe with it.......and I'm betting on the fact that the pipe between the Greddy peice and the IC will work even tho its technically an S14 peice. I think its just a 90 degree "L" shaped peice...shouldnt be much different than the peice that comes with the S13 kit. *fingers crossed*

-m

[mbmbmb23]

Check this out.

http://cgi.ebay.com/intercoole...wItem

[c-rad]

Check this out.

http://cgi.ebay.com/intercoole...wItem

I have the S14/15 cold-side piping. Its the exact same as the one in that auction. It bolts RIGHT up. The only issue is the small pipe that the factory BOV connects goes right to the upper radiator inlet. I had to hacksaw mine off and stick a freeze plug in there. You can see here in this pic--