Do you think it'll fit in my 240?

Post by **Queamore** » Mon Jun 23, 2003 4:03 pm

engine

Website · Post by **quiksilvia** » Mon Jun 23, 2003 4:03 pm

with room to spare, no prob .......

Post by **240marcuSX** » Mon Jun 23, 2003 4:03 pm

yeah go ahead and buy it, itll bolt right up, itll even use the KA transmission....

Post by **Holisticbeatz** » Mon Jun 23, 2003 4:03 pm

Whoa.. if you could dream it, it could happen. Just ask Aries.

Post by **Queamore** » Mon Jun 23, 2003 4:03 pm

I just wanna try something new. Something no one has ever done before. All I need is a grinder a welder and a dream

Post by **nissanrcer240** » Mon Jun 23, 2003 4:03 pm

hell go for it, it would be fun to see

Post by **float_6969** » Mon Jun 23, 2003 4:03 pm

It would be fun to see the car flip over backwards when he floors it!

Post by **float_6969** » Mon Jun 23, 2003 4:03 pm

HELL YEA! A wheelie bar on a 240! Now THAT is cool.

Post by **MainEvent212** » Mon Jun 23, 2003 4:03 pm

um...that engine cant be all that powerful...

Post by **Silent Drifter** » Mon Jun 23, 2003 4:03 pm

Its been done befor jus not with that exact engine a guy i work with had a 71 280 an put a jaguar xj12 engine in it ran 9.4 an topped out at 160

Post by **float_6969** » Mon Jun 23, 2003 4:03 pm

I wasn't serious mainevent. If anyone was going to need a wheelie bar, it would be aires.

Post by **Aries** » Mon Jun 23, 2003 4:03 pm

KS_Honda_Killer wrote:I wasn't serious mainevent. If anyone was going to need a wheelie bar, it would be aires.

I have them, they're removable with 4 bolts

Chute is coming in next week.

As for the V12, buy it, and bring the car.We'll get it in

Post by **Queamore** » Mon Jun 23, 2003 4:03 pm

Thanks Aries but I couldn't even imagine how much you would charge me to put that kinda motor in. I bet it would be way over budget.

Just promise that we can race when I'm done.:alcoholic The drive out there from chicago should be what, about 30 minutes.

Post by **Tino** » Mon Jun 23, 2003 4:03 pm

Gimme a big hammer and handle of grandpas medicine won't be a problem.

Post by **Smurf6x6** » Mon Jun 23, 2003 4:03 pm

Mount it in the Hatch

Website · Post by **TurboKA37** » Mon Jun 23, 2003 4:03 pm

yea i was thinking about doing sumthing like this but the car would be too much front heavy.

Post by **Queamore** » Mon Jun 23, 2003 4:03 pm

I don't think it would be that much heavier. Aries says his LT1 is only 50lbs more. It would take I would think at least another 200lbs more to be to front heavy. Aries says at 170 his front end lifts almost all the way off the ground.

Website · Post by **wiwalsh** » Mon Jun 23, 2003 4:03 pm

That wont fit.... but you might try this

http://cgi.ebay.com/ws/eBayISA...26226

454 Hp (2300 RPM)

This one should be good toohttp://cgi.ebay.com/ws/eBayISA...11754

http://cgi.ebay.com/ebaymotors...28748

or my favorite... http://cgi.ebay.com/ws/eBayISA...14050

Think you can strap that one on Aries?? So how much down force would I need to ride that baby around?

Post by **Tino** » Mon Jun 23, 2003 4:03 pm

eh... those are all kinda nice but I was thinkin more on the lines of this.

http://www.pureluckdesign.com/...x.htm

Website · Post by **TurboKA37** » Mon Jun 23, 2003 4:03 pm

well its a torque box! if u get it up to 6 million lb/ft i might consider. possibly if i got some nitrous.

Can u say front heavy?

Website · Post by **wiwalsh** » Mon Jun 23, 2003 4:03 pm

You think mabye you can have a shop bore it 2" over for me?

Website · Post by **TurboKA37** » Mon Jun 23, 2003 4:03 pm

maybe but that would be alot of work well over 2,000 cubic feet of borring.

Post by **YanT3I** » Mon Jun 23, 2003 4:03 pm

[QUOTE] or my favorite... http://cgi.ebay.com/ws/eBayISA...14050

Think you can strap that one on Aries?? So how much down force would I need to ride that baby around? [/QUOTE

That made me laugh so hard lol

Website · Post by **TurboKA37** » Mon Jun 23, 2003 4:03 pm

hehe, can u believe those pictures of the 14 piston deisel engine??? the men are the size of the diameter of the crankshaft!!! what is that engine going to be powering?

Post by **Get240DiZzY** » Mon Jun 23, 2003 4:03 pm

wiwalsh - LMAO! A jet powered 240 would be sick phat.

Post by **Queamore** » Mon Jun 23, 2003 4:03 pm

Probably a cruise liner. or a huge freighter boat.

Post by **Tino** » Mon Jun 23, 2003 4:03 pm

Yea they build the ship around the engine.

it says turbo yet i see no turbo

Post by **Queamore** » Mon Jun 23, 2003 4:03 pm

I think the turbo is that big circle in the drawing on the top.

Post by **gibbo80** » Mon Jun 23, 2003 4:03 pm

oh those mercedes engines bolt right up its crazy. its crazy, the ca18 makes those engines look tiny

Website · Post by **TurboKA37** » Mon Jun 23, 2003 4:03 pm

i saw a jet powered focus on tv once. it was pretty phat but it was in a carshow so i didnt see it run

Do you think it'll fit in my 240?

Do you think it'll fit in my 240?

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums