Current Viper Alarms, Remote Starts and Alarm/Remote Starts

[r6eater]

i have a viper 791XV system that was given to me, I wired it all up and it works but the wire was left out for me to put the shock sencer on the car. I have the sencer it self just not to wire, how much out that be just for that and maybe a another sencer or two that will work with this system. please PM me with pricing. thank you for your time

[Broadfield]

PM sent!

[carcustomizer]

PM'd!

[Broadfield]

Replied

[PJames]

I know this is an extremely old topic and I apologize for inquiring about it, but I too have a 1990 240sx with manual locks and want to install the Viper 3303, do I need other parts other than the 2 actuators and relay pack to fully install the 3303?

Also, will this actuator suffice? http://www.bestbuy.com/site/Directed+El ... &cp=1&lp=1

And for my last noob question: If I install this alarm now and swap my engine for an SR20 in the future, would I need to reinstall my alarm? (again, sorry for the inexperienced questions, I'm not quite familiar to cars in general but would like to learn)

Thanks in advance.

[kabukrish]

Hello ,
I need to buy the Viper 3203 from you ,how i will do that ???
and also i need to know can you help me for the installation (the wired diagram for Fiat Punto Classic 2011)

Thanks

[kabukrish]

Replied

Hello ,
I need to buy the Viper 3203 from you ,how i will do that ???
and also i need to know can you help me for the installation (the wired diagram for Fiat Punto Classic 2011)

Thanks

[pepesilvia]

when i first bought my 240 it had an alarm system installed in it and the remote would always stop working and lock me out of my car and i wouldnt be able to start it. i had to break into my own car and rip out the alarm etc. and had the cops called on me in my drive way..... so i am skeptical of alarm systems... but i have a couple questions.... 1.) how hard is this thing to install? 2.) would there be a way to install a kill switch that kills the alarm in case it bugs out on me? cuz i may be interested in one of these for these forum prices... good prices

[Broadfield]

Replied

Hello ,
I need to buy the Viper 3203 from you ,how i will do that ???
and also i need to know can you help me for the installation (the wired diagram for Fiat Punto Classic 2011)

Thanks

Email sent!

when i first bought my 240 it had an alarm system installed in it and the remote would always stop working and lock me out of my car and i wouldnt be able to start it. i had to break into my own car and rip out the alarm etc. and had the cops called on me in my drive way..... so i am skeptical of alarm systems... but i have a couple questions.... 1.) how hard is this thing to install? 2.) would there be a way to install a kill switch that kills the alarm in case it bugs out on me? cuz i may be interested in one of these for these forum prices... good prices

They are pretty easy to install for the novice. With the purchase I can also include a vehicle specific wiring tech sheet that will inform you of color, location and polarity of every wire needed for the install. Yes, you could simply install a hidden kill switch to interrupt main power to the system.