CLASSIFIEDS THREAD! Read Rules Before Posting!

[HxC_Nismo]

1000cc injectors SOLD

Modified by HxC_Nismo at 4:29 PM 1/15/2010
Modified by HxC_Nismo at 7:14 AM 1/18/2010

[HxC_Nismo]

used tomei 600cc low impediance injectors for rb26, 10.5mm (will fit in stock rb26 fuel rail)

***SOLD***
Modified by HxC_Nismo at 5:20 PM 1/30/2010

[Reaper]

i'm looking for a stock flywheel in good condition or a stock replacement that IS NOT aluminum. Let me know what you guys have please. I need this QUICK.
Modified by Reaper at 6:15 PM 1/12/2010

[HxC_Nismo]

what rb flywheel do you need cause i have both rb25 and rb26 flywheels (yes there oem stock flywheels)email me [email protected] if you want to buy one
Modified by HxC_Nismo at 3:55 PM 1/13/2010

[S13RaceBred25]

Looking for RB25/S13 harness. Already wired together so i dont have to mess with any of the wiring and screw up somewhere. Ive seen some people selling them all ready to plug to RB25 and throw into S13. Really need. Please email back [email protected]

[boosted98gst]

WTB RB25DET S1 Coilpacks x6

Has to be S1 ive been ripped off 2 times and now stuck with 12 coilpacks that I can not use. No rb20 coil's

Looking for a Sr20det downpipe no janky egay brand, im willing to buy a decent downpipe.

[meet07]

i have 6 q45 coil packs that are for sale...There the same as the S1 rb25det...

Asking $100 shipped in the USA.

let me know

[Boostedkouki23]

RB25/26 Centerforce twinplate clutch for sale about 75% left on clutchs i will have pics tonight im pulling the transmission off today! Looking to get $700 shipped for it dont be scared to make offers!!

Email: [email protected]

[StricNyne]

i am looking for some 11mm injectors any size over 600cc and any brand. let me know what you got!top feed low impedence

[email protected] in advance !

[HxC_Nismo]

i am looking for some 11mm injectors any size over 600cc and any brand. let me know what you got!top feed low impedence

[email protected] in advance !

look at my earlier post i have BRAND NEW 11mm RC low imped. 1000cc injectors for $480 shipped they go on ebay for $540

let me know bud just email me [email protected]

[nyc240sx]

Selling a set of 6 coil packs rb25det s2 from 1995 nissan skyline r33 they're in excellent working shape mileage on them is 94000km$220 takes them + shippingYou may email me at: [email protected]

[Blackx919xMagic]

WTB: Egi Subharness for the rb20det. Need it for the knock sensor.

Shoot me an email with price at: [email protected]

[madcowvert]

SOLD!
Modified by madcowvert at 8:51 AM 3/12/2010

[platez808]

looking for a rb25 ecu, preferably a series 2 but i can work with a series 1 also. you can reach me at [email protected] or droppinplatez808 on AIM

[synthtk]

R33 RB26DETT Stock Turbo setup, includes 2 turbos w/ normal shaft play. 2 Manifolds w/ heat shields, twin turbo inlet pipe, o2 sensors, Water/Oil lines. One line had its fitting cut off (shown in last pic on the right).

$600 for it all

R33 RB26DETT Stock Plenum - SOLD

R33 RB26DETT ECU - $100

R33 RB26DETT Fuel Rail w/ Regulators - SOLD

R33 RB26DETT Fan Clutch & Fan - SOLD

R33 RB26DETT AC Compressor - $75 if i can find it

RB25DET Front Sump pan, has a patched return for RB26(?) - $75

RB30 S2 Turbo Block, currently broken down to bare block w/ crank, have stock pistons and oil seal etc baggied and boxed - $1200

RB30 Fordged Rods, I was told that these were RIPS rods, ARP2000 Rod Bolts, Brand New in Bags - $850

Willing to make a deal on the RB30 block/rods.

Turbo Filter Adapter, use this to bolt to the turbo inlet to use a normal 2.5" silicon adapter/filter - $10

Vibrant Performance 2.5" 90 Aluminum Elbow - $20

More pics for everything here: http://picasaweb.google.com/cfitzpatrick/ForSaleor http://picasaweb.google.com/rb...Blockor http://picasaweb.google.com/rb...0Rods

Local pickup prefered or buyer pays shipping. PayPal ok if 3% fee is covered by buyer. Feel free to ask for more detailed pictures or any questions.

Willing to trade for LS1 parts, T56 trans or 97/98 S14 240sx parts

Long time poster on HybridZ

cfitzpatrick[at]gmail[dot]com

Modified by synthtk at 5:14 PM 1/20/2010

Modified by synthtk at 1:44 PM 1/21/2010

Modified by synthtk at 10:04 AM 1/22/2010
Modified by synthtk at 11:30 AM 2/19/2010

[platez808]

looking for a rb25 ecu, preferably a series 2 but i can work with a series 1 also. you can reach me at [email protected] or droppinplatez808 on AIM

[dtowngoalie]

Looking to clear out all my RB20 stuff since I've sold the car. I'm located in York, PA and anything can be picked up or shipping on your dime. Email me at [email protected] for picsor questions.All parts came off an RB20:Uncut engine harness - 150Code 22 ECU - 100Igniter - 40CAS - 50MAF - 506 coil packs with complete harness and brackets(little cracked up) - 25Transmission(Local pickup only) - 150Both cams and gears - 25 eaExhaust manifold - 50Turbo elbow - 25Turbo elbow with stock downpipe attatched - 50Stock RB20 turbo -100Bare block(local pickup only) - 75Bottom half of intake manifold - 20Brackets that connect block to bottom of trans. - 20CAS Bracket - 20Clutch fan - 25Fuel rail w/ injectors and regulator - 50

[HxC_Nismo]

WANT TO BUY

Greddy Intake Manifold

Exhaust manifold (quality tubular only, any flange/orientation)

Push type RB25 clutch

Email: syncade (at) gmail (dot) com

Modified by neonbomb at 9:32 AM 1/7/2010

EMAIL SENT ON RB25 CLUTCH

[3bar_dc2]

I'm selling my 1995 Nissan 240sx S14. The body is in great shape and the chassis has 203k miles on it. I bought the car as a completely stock Automatic. The car is not running yet but it's only lacking about $1500. All the hard work has been done already. This is a great chance to get into this car for far less than it would cost to do from scratch.

I tore the rb25 down and intalled -new oil pump -new water pump -new tensioner and idler pulley -power enterprise timing belt -ARP head studs -complete oem gasket kit

List of mods -Zerolift Autolab rb25 mount kit -1 pc. steel driveshaft w/ Spicer parts. -ISIS front facing intake manifold -Q45 90mm throttle body -Custom t4 turbo manifold -T4 GT35r turbo -Tial 38mm wastegate -Spearco 28"x11"x3.5" core -Full 3" intercooler piping -ford lightning maf flange (blow thru) -Greddy Type R bov -ACT 6puck clutch kit -Nismo transmission pivot ball -Catch can w/ bung welded to oil pan for vta -FAL dual electric fan setup -HKS fan controller (not yet installed) -Z32 ECU (was planning on running Nistune.)

The car needs exhaust, lightning maf, injectors, and engine management to run. I've probably got over $8500 into it not counting little odds and ends.

I'm asking $7000.

Not looking to part out at this time.











[email protected]

[rb420sx]

hey guys im just looking for a flywheel for my rb20 prolly the bolts to as i cant find anything that my dad misplaced. thanks

[Chaos the Xile]

ALL ITEMS ARE BNIB PRICES ARE PRETTY FIRM NEED THE CASH!

TOMEI PROCAMS 270DEG/10.25MM LIFT - $700TOMEI SOLID LIFTERS W/SHIMS- $450SUPERTECH DUAL VALVESPRINGS/TI RETAINERS - $500CP PISTONS 86.5MM - $500 PENDINGEAGLE H BEAM CON ROD W/ ARP 2000 ROD BOLTS - $450 PENDINGARP HEAD STUDS - $100 PENDINGACL CALICO COATED ROD BEARINGS - $150 PENDINGAUTHENTIC JUN CRANK COLLAR - $100RB25 S1 MACHINED BLOCK(MACHINED TO ACCEPT 86.5MM PISTONS) - $500 PENDINGER34 NEO 5 SPD TRANSMISSION - $1000



[email protected] 3% Fee+Shipping

Thanks.

Modified by Chaos the Xile at 8:13 AM 2/3/2010
Modified by Chaos the Xile at 8:33 AM 2/3/2010

[wrgibson]

WTB: Good condition stock RB25 turbo. Looking for a turbo with little to no shaft play. Please email pictures and prices to [email protected]. Thanks!

[sickness14]

edit.
Modified by sickness14 at 6:46 AM 4/13/2010

[bspeed_il]

sold.
Modified by bspeed_il at 10:15 PM 2/4/2010

[Boostedkouki23]

IHI turbo's for the Rb26dett T2 flanged, Aftermarket dumps, comes with stock Rb26 manifolds, 02 sensors & Crossover pipe!! Everything needed to drop them in!!!

Spec: VN14 9808SERIAL# RHF5 28410APARTS# 14411RP801

I don't know any info on them i tried searching and i can't find anything all i know they can handle 600whp!!

Im looking to get $600 bucks for them i can also ship at buyers expense!!

Pics:

[ficklecyler]

WTB: Set of valves for a S2 RB25DET. If you have a full set great, if it's incomplete let me know what you have. Contact me at [email protected]. Thanks!

Update: Got a longblock for a killer deal locally so no need for valves anymore. Delete!
Modified by ficklecyler at 11:04 AM 2/19/2010

[eh?]

Had this hose made to complete my a/c installation. May need some clearance behind the head.$75+ [email protected]

[sickness14]

edit
Modified by sickness14 at 6:47 AM 4/13/2010

[Jo240sx]

Stock RB25DET turbo. No shaft play 250obo [email protected]

[GSDKinked]

ALL ITEMS ARE BNIB PRICES ARE PRETTY FIRM NEED THE CASH!

TOMEI PROCAMS 270DEG/10.25MM LIFT - $700TOMEI SOLID LIFTERS W/SHIMS- $450SUPERTECH DUAL VALVESPRINGS/TI RETAINERS - $500CP PISTONS 86.5MM - $500EAGLE H BEAM CON ROD W/ ARP 2000 ROD BOLTS - $450ARP HEAD STUDS - $100ACL CALICO COATED ROD BEARINGS - $150AUTHENTIC JUN CRANK COLLAR - $100RB25 S1 MACHINED BLOCK(MACHINED TO ACCEPT 86.5MM PISTONS) - $500RB25 S1 CYLINDER HEAD(NO CAMS) - $300ER34 NEO 5 SPD TRANSMISSION - $1000



[email protected] 3% Fee+Shipping

Thanks.

EMAILED!!!