carpet removal question

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
User avatar
s13beast
Posts: 849
Joined: Sun Aug 24, 2008 3:55 pm
Car: 94 5spd silvert S14 SR
91 hatchback dd

Post

first off...sorry for starting another interior strip question. Ok My interior is pretty decent as far as cleanness, but my carpet is terrible for some reason. its super gross and has a big random hole on the driverside. so my question is if i strip all the carpet and remove sound deadening and get it nice and smooth and black will it still look decent? has anyone done this? i dont give a crap about loudness or anything. its a 92 black hatch. pics would be great. all new carpet is too expensive for my cheapness. haha thanks yo


User avatar
BrianHarte
Posts: 3338
Joined: Thu Sep 13, 2007 10:24 am
Car: 180sx

Post

It will get dirty and scratched up pretty fast I bet.

User avatar
S13Joe
Posts: 1741
Joined: Tue Sep 09, 2008 9:50 am
Car: 92 Coupe

Post

i wouldnt do it. carpet absorbs water. metal doesn't.

User avatar
BrianHarte
Posts: 3338
Joined: Thu Sep 13, 2007 10:24 am
Car: 180sx

Post

That is true also.

On my first s14 I had no carpet.It SUCKED so bad when it rained. water comes through the floor and all that crap.

User avatar
s13beast
Posts: 849
Joined: Sun Aug 24, 2008 3:55 pm
Car: 94 5spd silvert S14 SR
91 hatchback dd

Post

hmmm not really too concerned. It's not a show car. I'm just asking will it look better than stained bad smelling holy carpet.

User avatar
BrianHarte
Posts: 3338
Joined: Thu Sep 13, 2007 10:24 am
Car: 180sx

Post

Yeah it probably will.Do it.

MastaYu
Posts: 12463
Joined: Wed Oct 03, 2007 3:49 am
Car: 92 Nissan 240SX SE HB

Post

rubber carpets

User avatar
S13Teddy
Posts: 5138
Joined: Mon Apr 30, 2007 4:53 pm
Car: R32 Skyline, S13
Contact:

Post

Haha, when it rains my legs get drenched from the water coming through the holes in the floor. Floormats will move around too much... So just throw on some griptape and voila!


User avatar
White Comet
Posts: 19033
Joined: Thu Jun 15, 2006 7:22 am
Car: fc, s13 and mazda6, Sierra
Location: lancaster, pa

Post

upgrade to a zenki carpet, its better then the chuki one. i'm selling one but its pending sale

User avatar
CSUPUEBLOTIM
Posts: 742
Joined: Mon Mar 31, 2008 3:45 pm
Car: 1992 240sx Sr20det Coupe Silvia Front

Post

I am getting ready to do the rubbermat/rhino lining stuff and then just the front half carpet.

SR24DET
Posts: 726
Joined: Sat May 19, 2007 6:41 pm
Car: RMS13

Post

The floor is a little slipery. As far as has anyone done it? Everyone that has gutted there car. So yes, many. Should you? Up to you. Did I? Yes. Like it? Love it!

User avatar
lemon
Posts: 278
Joined: Tue Jan 15, 2008 4:15 pm
Car: 1979 rally nova
Contact:

Post

to the people getting wet from the wholes in the floor..........

FILL THE DAMN HOLES

User avatar
CMG
Posts: 1259
Joined: Tue Jan 16, 2007 6:48 pm
Car: 1989 240sx Hatch w/ Redtop

Post

If your car is mainly for track then strip everything and make it as light as possible. If you use the car more for the street, strip the rear, pull out the carpet and pull off all the fiber underside that takes up weight. Put the carpet back and maybe use some mats. Especially if you live in a wet place at wintertime, you'll be squeaking and slipping all over the pedals.

User avatar
S13Joe
Posts: 1741
Joined: Tue Sep 09, 2008 9:50 am
Car: 92 Coupe

Post

lol grip tape is a really good idea go to a skate shop and get MOB griptape is the best. I personally am not down for a footsy slip and slide while i drive though, keep the carpet or look in the classifieds for a part out. I'm sure someone would give up a nice condition carpet for a decent price.

User avatar
poems2beats
Posts: 920
Joined: Thu Sep 13, 2007 3:26 pm
Car: Nissan S13 pignose-sold
Nissan S14, current project
99 Honda Civic, current DD
Location: Stockton

Post

Teddy, what type of paint did you use. Rattle can?

lol this is my second time asking.

User avatar
glitched
Posts: 1860
Joined: Fri Jun 25, 2004 8:20 am
Car: 1992 240sx se
Contact:

Post

The sound deadening in my foot wells was the worst to remove, i couldnt get all of it out and it would have looked terrible if i tried to paint it. I tried dry ice and heat gun methods.

I did one of those cheap $120 carpet jobs from those carpet websites. THe carpet is not even close to stock quality, doesnt fit quite right and i cut a little short in places, but it still looks better than nothing. Plus it's jet black in color

Oh and it weighed about half of what the stock carpet weighed.

User avatar
S13Teddy
Posts: 5138
Joined: Mon Apr 30, 2007 4:53 pm
Car: R32 Skyline, S13
Contact:

Post

poems2beats wrote:Teddy, what type of paint did you use. Rattle can?

lol this is my second time asking.
Rustoleum rattle can.

User avatar
Warped161
Posts: 1449
Joined: Thu Jul 14, 2005 1:25 pm
Car: 90 s13 the never ending project
Location: Underwater in NY
Contact:

Post

you can always 3m spray liner like i did with my rear, zerothread?id=290200

User avatar
White Comet
Posts: 19033
Joined: Thu Jun 15, 2006 7:22 am
Car: fc, s13 and mazda6, Sierra
Location: lancaster, pa

Post

^ not bad looking, does it dry hard or kinda soft feeling? most rubberized undercoatings i've used are kinda soft, so when doing my underbody i went with this stuffits dries really hard and as long as you put on the recommended amount (about 5mm thick) it won't chip off. i love it for the underbody but it woudl probably work well on the interior as well

Will Goes Boing
Posts: 4
Joined: Sat Oct 04, 2008 5:19 pm

Post

Using truck bed lining is definitely a good idea. You could bondo the holes and then put a thin layer of truck bed lining throughout the stripped interior.

User avatar
s13beast
Posts: 849
Joined: Sun Aug 24, 2008 3:55 pm
Car: 94 5spd silvert S14 SR
91 hatchback dd

Post

DirtyGhettoKids wrote:lol grip tape is a really good idea go to a skate shop and get MOB griptape is the best. I personally am not down for a footsy slip and slide while i drive though, keep the carpet or look in the classifieds for a part out. I'm sure someone would give up a nice condition carpet for a decent price.
haha blackmagic for life!!!!

But yeah i think im gunna do it. i have black interior with a black floor. and i actually have a couple sheets of griptape laying around. and since my floor is black you really wont be able to see it. il post pics when im done!

jeez teddy il just start emailing you my freakin questions haha you always dominate them <you <my questions.

User avatar
tramp_drift240
Posts: 4649
Joined: Mon Nov 20, 2006 2:43 pm
Car: 1992 240sx SE Coupe
Location: NoVA
Contact:

Post

White Comet wrote:upgrade to a zenki carpet, its better then the chuki one. i'm selling one but its pending sale
get. at me. mang.

User avatar
White Comet
Posts: 19033
Joined: Thu Jun 15, 2006 7:22 am
Car: fc, s13 and mazda6, Sierra
Location: lancaster, pa

Post

let me get your zip again for shipping quote. i must have thrown out the paper i wrote it on the first time.

User avatar
tramp_drift240
Posts: 4649
Joined: Mon Nov 20, 2006 2:43 pm
Car: 1992 240sx SE Coupe
Location: NoVA
Contact:

Post

25064.

User avatar
s13beast
Posts: 849
Joined: Sun Aug 24, 2008 3:55 pm
Car: 94 5spd silvert S14 SR
91 hatchback dd

Post

how much dry ice is needed for the whole interior of a s13?

User avatar
s13beast
Posts: 849
Joined: Sun Aug 24, 2008 3:55 pm
Car: 94 5spd silvert S14 SR
91 hatchback dd

Post

abt how much dry ice is needed for the hole interior for a s13?

User avatar
miracleboi123
Posts: 143
Joined: Fri Nov 21, 2008 5:27 pm
Car: 93 s13 coupe

Post

dont even think about going gutted out. people only do it if their not going to use their car as daily cars or they just dont care about the need of it. but lemme tell you: i go to south carolina all the time. i got my car in braselton georgia and had to go home in it [1 hr.] drive. my s13 was gutted out to the black flooring and lemme tell you all i could feel was heat. not only was the sound annoying as anything but that heat will kill you if your driving your car for a while. even in the summer. and carpet expensive? your kidding me.

go to walmart. first buy your gray/black carpet. they have it in rolls i believe 4x6 or 3 x 6 cant remember. but i bought some rolls and it was only 8 dollars per roll.

as for the heat insulation/sound deadening.

go onto ebay.

they have this heat insulation thing/sound deadening that is 32 square feet for only 30 bucks plus free priority shipping which you get in like 3 days guaranteed.

im telling you thats only like 60 bucks.

if your worried about doing it yourself its easy:

just go find some aluminum foil, mold it to the flooring of your car[note to remove those door panels or w.e if you'd like + seats/seat belts.[since their automatic generated] then pull it out.

put it on the bottom of the heat wrap/insulation. and just cut to a reasonable length.

keep doing that. and then once you got that; just get the carpet use the heat/sound insulation as a template. and there you go.

as for adhesive. go use 3m auto bonding spray.

its roughly 18 for a bottle that i got at autozone.

you spray 3 times over each surface. let it dry. then just bond both of them together by applying pressure.

i would do the carpet and the heat insulation at the same time.and then bond it to the flooring of your car.

thats only like 80 dollars to do it yourself.

and it'll look clean.

trust me its just so dirty and scratched up with no carpet.


User avatar
nifares240
Posts: 617
Joined: Tue Dec 09, 2008 10:29 am
Car: 1993 240sx Black-Project Car, 1993 240sx Red-SOLD, 1994 Sentra, 2004 Nissan Sentra SE-R SPEC V-Daily, 1999 Toyota Camry
Location: NYC

Post

rode with a friend's ae86; bought it with a gutted interior. it sucks. so much heat transfer during summer.

usdm_180sx
Posts: 744
Joined: Sun Dec 21, 2003 5:50 am
Car: 1993 Nissan 240SX base S13
Contact:

Post

BrianHarte wrote:That is true also.

On my first s14 I had no carpet.It SUCKED so bad when it rained. water comes through the floor and all that crap.
LOL I remember having to step on the hole by the ecu while riding in your car in the rain. Good times!

modulation
Posts: 226
Joined: Wed Aug 01, 2007 3:05 pm

Post

I spent hours and hours doing this..

#1. Use dry ice, makes everything soo much easier#2. Use goo-gone to remove remaining parts(Except to spend like 6+ hours to get interior clean.)

I then used durabak on the floor. It helped with the heat-transfer and quieted down the car a good amount. It doesn't add but probably 1/2 the weight you take off by removing the tar/sound deadening. I swear it also "stiffens" the chassis up a little tiny bit.

Only think is that when it's wet its still slippery. But thanks to that screwing genius up there with the grip tape Idea I'm going to fix that problem soon.


Return to “240sx General Discussion”