Can i do without the hoses to here and just plug it off????

[91s13sr20det]

can i just block it off and the car will run fine w/o any problems??

o btw im new here and thats my project ill post more pictures when i have the time:)

[IanS]

No, you can not plug it, there needs to be a T in that location, the rear side should go to a catch can, and then back into the whose on the rear of the block, the front needs to see a pre turbo, post MAFs vacuum source.

[91s13sr20det]

alright got any idea were i can get the T for that section? and any specific type of hosing needed

[91s13sr20det]

nevermind i found the T and the catch can amongst the mess of parts i have lying on the ground i just need to find the line taht goes to the intake now hahaha. unless there is an easier alternative to doing that, any sugjestions??

[idahotuner]

get a mini air filter to put on the side of the tee going to the intake. all that hose is for is to venilate the head. so a mini filter should work

[nwmrkt]

what about if I install a aftermarket catch can? what do I do then?

[idahotuner]

from looking at engine bay pictures i think you would just run the hose to the can then and then the can has vent hole in it.but dont take my word on that

[91s13sr20det]

i managed to figure it out thanks for the help though

[IanS]

get a mini air filter to put on the side of the tee going to the intake. all that hose is for is to venilate the head. so a mini filter should work

DO NOT DO THIS, Nissan put that hose there for a reason, this is not a 350 small block, you need vacuum inside the crankcase, under normal engine operation the PCV valve does that, but under boost it cannot, the vacuum created by the intake takes over that duty.

[91s13sr20det]

ok now im a little lost so i cant just put a breather filter on there? and i should just get another hose to put to the intake? and take back the breather filter i have...

[IanS]

Breather filters belong on Hondas and Muscle cars, bring it back and do things the right way, it will keep your crankcase cleaner.

[91s13sr20det]

alright but there is 3 different spots on the intake that are capable of utilizing for the hose any sugjestions ill post up a pic once t mobile sends me my password to access my album

[ILikeMy240sx]

I always feel like a topic that's been talked about very throughly always gets asked over and over and over again...

Why do I bother posting anymore??? bleh...

Link: zerothread?id=278685

[IanS]

I always feel like a topic that's been talked about very throughly always gets asked over and over and over again...

Why do I bother posting anymore??? bleh...

Link: zerothread?id=278685

Initially I was feeling in a generous mood so I answered without pointing out the search button. Once Mr breather filter gave his 2 cents I felt I needed to clarify what the correct way to do things was.

Is using the search button really as difficult to use as many make it seem?

[CMG]

Is using the search button really as difficult to use as many make it seem?

Sometimes I can't seem to find anything when I search, but computers aren't really my thing so it's probably just me.

[91s13sr20det]

i had no idea what it was or what the parts were called that were connected to it so using a search was basically pointless

[idahotuner]

well i am retarded .

looking at my redtop i dont even have the stock catch can. so i guess i need to add that to my list of things. i guess we leanr soemthng new everyday. which i sweet that is why i am on this forum.

[IanS]

well i am retarded .

looking at my redtop i dont even have the stock catch can. so i guess i need to add that to my list of things. i guess we leanr soemthng new everyday. which i sweet that is why i am on this forum.

Me three years ago: I NO NOT ANYTHING, I ARE SUPER NEWB!!!!!!!!!!!

Me now: search, search, answer questions, search search

[White Comet]

not to add to the confusion but when installing an aftermarket catch can should it go in place of the old catch can or coming off the front of the T?