CA18DET engines: Want one?

Post by **shpaintball** » Mon Sep 25, 2006 10:24 am

hey back again what is the price on the complete swap for 240sx (s13) to AL 35758 [email protected]

Post by **hvp014** » Fri Sep 29, 2006 12:59 am

hey dee email sent..

Post by **boost_boy** » Fri Sep 29, 2006 7:36 am

hvp014 wrote:hey dee email sent..

You may want to try that again because I haven't gotten any new personal mail.

Dee

Post by **hvp014** » Fri Sep 29, 2006 11:35 am

resent

thanks

Post by **smdrcr_9** » Sat Sep 30, 2006 4:15 am

quote to 20685 plz.. thanks

Post by **chattanoogarebel** » Sat Sep 30, 2006 2:21 pm

Give me a quotefor a complete motorset with install to [email protected], please?

Post by **NBF823** » Sun Oct 01, 2006 6:17 am

Need CA18DET, whole motor+ECU. If it will bolt to CA18et S12 trans, Don't need transmission. Bad turbo OK, have one already, But motor must be good. How much to ship to 15003? Loading dock possible.

Post by **drifting circles** » Sun Oct 01, 2006 7:29 am

Need a ca18det front clip rwd 5spd shipped to Gilbert,Az 85233. Email [email protected].

Post by **Reno** » Mon Oct 02, 2006 7:51 am

shipped to 32730? RWD 5 speed uh..

Post by **chattanoogarebel** » Mon Oct 02, 2006 2:00 pm

I tried once but maybe it didn't get through. May I please get a qoute for a full motorset with install to [email protected]

Post by **ZERO_HOUR** » Tue Oct 03, 2006 7:54 am

Can you choose exactly what you want with the motors? if so, i'd be interested in a shipped price to PA, 15401 for the following:

longblock minus the following:power steering pumpinjectorsexhaust manifold, turbo, and all turbo plumbing

what i need: engine wiring harness (ecu and maf not necessary)

please email a shipped price to: [email protected]

thanks

Dale

Post by **turblu** » Tue Oct 03, 2006 8:18 am

Quote for a complete swap to 89031 please... I also have a business address available if thats makes that much of a difference

Post by **boost_boy** » Tue Oct 03, 2006 2:35 pm

ZERO_HOUR wrote:Can you choose exactly what you want with the motors? if so, i'd be interested in a shipped price to PA, 15401 for the following:

longblock minus the following:power steering pumpinjectorsexhaust manifold, turbo, and all turbo plumbing

what i need: engine wiring harness (ecu and maf not necessary)

please email a shipped price to: [email protected]

thanks

Dale

That harness is a hot ticket right now and not being able to sell it complete with something my friend isn't willing to do at this time. Everything else can be accomdated.

Dee

Post by **boost_boy** » Tue Oct 03, 2006 2:46 pm

Attention future CA18DET owners.

There is one complete engine set in stock at this time that I will be able to assist you with. There are about (5) CA18DET engines minus harnesses that are also available. If you want a good engine set and are serious about purchasing now, then reply to this post. If you need a good running CA18DET, then reply to this post. If you are not ready to buy at this time, and if I've given you a price before, rest assured CA18DET engines are going to go up in price in the near future. If you know what you want and you know who you want to buy it through/from, reply to this post and I'll get you a quote on this engine set. Other than that, you guys can check our sponsors here at NICO or take your chances with those ebay motors.

This is not a salesman pitch, but a mere attempt to prevent all the horror stories we've had on this forum and to make owning a CA18DET a pleasurable and fun experience the first time around as opposed to spending money only to turn around and have to spend it again. First come, first cash, gets the last engine set "Point Blank" . And besides, I won't be involved with engines and cars for the next 3 months unless it's just for a long block and you guys want a good deal. I personally will not be able to inspect the motor, but will point you in the right direction.

Dee

Post by **ZERO_HOUR** » Tue Oct 03, 2006 6:33 pm

i'd like a quote on both the complete engine set and what i described above minus the harness. Shipped to PA 15401.

Reply to [email protected]

thanks!

D

Post by **boost_boy** » Wed Oct 04, 2006 3:27 am

ZERO_HOUR wrote:i'd like a quote on both the complete engine set and what i described above minus the harness. Shipped to PA 15401.

Reply to [email protected]

thanks!

D

You got mail!

Dee

Post by **amolao** » Fri Oct 06, 2006 5:13 am

Check your email...

ooopsss, no email. ok

I need info on a CA18 shipped to 36330. This is going to be a long project, I'm in no rush. But I don't mind getting the engine now and let it sit for a little bit while start prepping the organ receptor....Please let me know about prices, condition of motorset, mileage,etc.....

thanks.....email me: [email protected]

Post by **turblu** » Fri Oct 06, 2006 5:18 am

Need a quote for a complete swap shipped to 89031....

[email protected]

Post by **S13FX** » Fri Oct 06, 2006 10:28 am

Can I get a quote on a complete swap shipped to 60046. Thank you

[email protected]
Modified by S13FX at 1:43 PM 10/6/2006

Post by **Reno** » Fri Oct 06, 2006 3:56 pm

Can I get a quote on a complete swap shipped to 32730. Thank you

---[email protected]---

Post by **240esseckz** » Tue Oct 10, 2006 2:49 pm

im interested in a ca18...does this include harness? ecu? ignitor? if not where could i get just those...and how much will it be shipped to [email protected]...

Post by **Reno** » Tue Oct 10, 2006 6:01 pm

Can I get a quote on a complete swap shipped to 32730. Thank you

---[email protected]---

Post by **driftin8ez** » Tue Oct 10, 2006 6:33 pm

Just wanted to post some good feedback about Dee.... He is a Great guy and if you buy an engine through him you will not regret it. I bought an engine from him about 2 months ago and I have had nothing but good experience from paying to start up. Great Guy and a Real asset to the community.

Post by **boardjnky4** » Wed Oct 11, 2006 7:29 am

im very interested in purchasing a motor. i would like a price quote on a ca18det(rwd).

needed:

longblock, complete(with all sensors)transmission(5sp.)harnessecuturbo

pls email me at [email protected]

Post by **drifting circles** » Wed Oct 11, 2006 6:49 pm

Need a Complete ca18det motorset even the stock sidemount and ic piping. Shipped to Gilbert,Az 85233.

Email: [email protected]

THANKYOU

Post by **DriftingisLame** » Sat Oct 14, 2006 8:45 am

Looking for a CA18 w/o transmission/IC/pipes. Must be a complete motor with ECU/harness. I'm in Oregon, willing to pick up from washington/cali (maybe).

[email protected]

Post by **ice2x01** » Sun Oct 15, 2006 5:12 pm

I would like a quote for a complete motorset with ecu, transmission, intercooler/pipes, etc, to Tallahassee, FL 32304, thank you.

my email is [email protected]

Post by **drftsil8ty** » Mon Oct 16, 2006 6:43 am

hey, I'm interested on buying a CA soon. would like to get a price for a complete (RWD) CA with transmission.

email: [email protected]

thanks, pete

Post by **RalliartRsX** » Thu Oct 19, 2006 1:07 pm

Looking for a sotck ecu for chipping purposes. What can you dig up?? Do you by any chance have a socketed one laying around??

Thanks, Chris

Post by **mjeazy4784** » Thu Oct 19, 2006 6:39 pm

hey I've got the cash in hand and need a ca18det full rwd swap like 5 minutes ago, my email is [email protected] got the cash in hand. im in cary NC 27511

CA18DET engines: Want one?

Re: (shpaintball)

Re: (hvp014)

Re: (boost_boy)

Re: (boost_boy)

Re: CA18DET engines: Want one? (boost_boy)

Re: CA18DET engines: Want one? (boost_boy)

Re: (kaChris803)

Re: (drifting circles)

Re: (Neejay)

Re: (chattanoogarebel)

Re: (ZERO_HOUR)

Re: (boost_boy)

Re: (boost_boy)

Re: (ZERO_HOUR)

Re: (boost_boy)

Re: (boost_boy)

Re: (boost_boy)

weee

Re: (240esseckz)

Re: weee (Reno)

Re: (drftsil8ty)

need ca18det asap

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums