Beginers drift set up. opinions wanted

[S3t0_S13]

yea im also 6'1 and i have a problem with pedels, my knees are bent and hit the bottom of my steering column, and when i take it back, my hands are a lil uncomfortable,

i ran into a problem, im welding my sparcos with their rails onto chopped parts from my old brackets, thats not the problem, i now dont have a lap belt, which i usually put on 4 track or jus messin around, i dunno i think ill weld the buckle part that clicks onto the sparco railing, buts its gonna be weird and i dont wanna cough up 200-300 for 4 pts

[TanManS14]

the bride's lower it about 3-5 inches. not sure the exact amount but lets just say with my stock seat my head hits the celing when im in the "proper driving position" and wearing a helmet, and with me in an evo with the bottom pads removed and using bride rails i have about 3 or 4 inches of headroom.

im not overly tall @ 6' but i sit upright when on track (as you should). if you are leaning back in your stock seat you might lose a TON more headroom putting a bucket in the car.

I do lean back slightly, because if not my head will be uncomfortably close to the ceiling, but when I say new seat I ment something that still reclines, just more aggresive, something like an srt-4 seat with the same locking seat belt design. I really like that set up. Im going for more of a daily functionability, with the occasional track day philosophy. Thanks a lot, Im really beggining to like this forum, and I find new things every day that I can learn from, thanks a bunch.

[S3t0_S13]

agh i jus said **** it and im gonna order em, wats another 200 dollars, rather safe then flying into my windshield with my chair eh?

what should i do about seatbelt, im not gonna have any, the hooks are not on the new brackets should i cough up another 200-300 for seatbelts??

[dousan_pg]

cough up 40 bucks for s14 or s13 canada seat beltsu dont need a harness

[Joe]

cough up 40 bucks for s14 or s13 canada seat beltsu dont need a harness

quoted for truth

harness on the street = retarded.

[S3t0_S13]

where can i find those seat belts at?and any other solutions?

[dousan_pg]

junkyards.

and canada.

or u can look in canadian junkyards too.

[S3t0_S13]

gee thxs, lmao let me jus take a plane 2 canadano one else has done somethin else?i was thinkin of weldin the buckle part onto the frame though its the best i can do ehh?

[dousan_pg]

i didnt say just canada

i said s14 seatbelts

which can be found in junkyards

in the USA

and on FS forums

dont weld stuff u dont need to. its stupid.