August Special - MidwayPartsTeam.com

[MidwayParts]

Dan,Hey I need a few small items...-(1) Power Steering belt ('95 DOHC)-(2) S13 rear lower strut nuts (strut-to-knuckle) -(2) Oil filters-(5) Drain washers (part# 11026-01M02)

Thanks!

The P/S belt is $7.99 and can be found here:http://www.trademotion.com/par...gid=2

The lower shock nuts are $1.86 each. They are not listed in the online catalog but you can mention them in the comment area when you order. Here is a pic:



The oil filters are $4.89 and are here:http://www.trademotion.com/par...gid=2

and the copper washers are $.55 each. Those you can also put in the comment area.

All of these are in stock or available today. You can also call me at 1-800-321-6926 ext 47740. Thanks and let me know if I can help anymore.

[SilviaSativa]

Before I place my order, could you pull up a diagram for the bumper/bumper reinforcement. I need the four bolts that attach the bumper to bumper reinforcement. Thanks so much!

[MidwayParts]

Before I place my order, could you pull up a diagram for the bumper/bumper reinforcement. I need the four bolts that attach the bumper to bumper reinforcement.

Thanks so much!

[onosqv]

Its $149.96 and it does not come painted. My catalogs say that you will also need the "heavy duty" trunk strut supports if you install this spoiler. They are about $20 each. Here's the link:http://www.trademotion.com/par...gid=2

I think I need heavy duty trunk supports for my 89 240sx coupe.

I have the trunk & spoiler off a 92/93 coupe or convertible and the trunk is insanely heavy compared to my 89 one.

The problem I run into is that it won't stay consistently open and won't pop up all the time when I use the interior trunk release.

Can you help me out Dan?

I currently have these pieces (except my trunk lid and spoiler are off another year):http://www.trademotion.com/par...gid=2

and I need something that will support my heavier trunk.

Thanks!email is: hyphendesigns AT yahoo.com

**edit**I also need/want a thermostat thingy which switches on the secondary fan. I'll be wiring that to another electrical fan for a dual fan set up.

Thanks

[MidwayParts]

I did some checking on those struts I told amoloa about. They arent available in singles anymore. They have a substitute set though that are $75.11 for the pair. Those are found here:http://www.trademotion.com/par...gid=2If the trunk is off another year, you may have some jerry-rigging to do.

Im not sure what to get you as far as the dual thermostat/fan setup. That vehicle never had one and I dont know which vehicle that did have one which would work for you. If you can find out which car will work, I can find the price for you.

[onosqv]

I did some checking on those struts I told amoloa about. They arent available in singles anymore. They have a substitute set though that are $75.11 for the pair. Those are found here:http://www.trademotion.com/par...gid=2If the trunk is off another year, you may have some jerry-rigging to do.

Im not sure what to get you as far as the dual thermostat/fan setup. That vehicle never had one and I dont know which vehicle that did have one which would work for you. If you can find out which car will work, I can find the price for you.

Thanks for the quick response.

I think I'll just hook it up somehow so that the 2nd fan turns on with the a/c, which is the only time I need the 2nd fan anyway.

As for the strut, would this be for the hatchback version or coupe version?

I figured I had to do some "creative" construction with the trunk, I was just hoping if you knew if the 92/93 coupe trunks w/ spoilers are significantly heavier than the 89 coupe trunks. The spoiler doesn't weigh much, it's the trunk that's the problem.

Is the 92/93 trunk support for coupe stronger? I'm just seeing if there is an easier way than to build a custom mount for this trunk.

Thanks!

[VitaminT]

I will put it on the car and take some tomorrow. It is BLUE.

The camera was dead so it will be later tonight or tomorrow. The cover fit like a glove. I mean perfect. Has the little mirror booties and all. I was a little scared of the price, but if you are looking for a great fit and great quality material get it. It is worth the money.

[MidwayParts]

Thanks for the quick response.

I think I'll just hook it up somehow so that the 2nd fan turns on with the a/c, which is the only time I need the 2nd fan anyway.

As for the strut, would this be for the hatchback version or coupe version?

I figured I had to do some "creative" construction with the trunk, I was just hoping if you knew if the 92/93 coupe trunks w/ spoilers are significantly heavier than the 89 coupe trunks. The spoiler doesn't weigh much, it's the trunk that's the problem.

Is the 92/93 trunk support for coupe stronger? I'm just seeing if there is an easier way than to build a custom mount for this trunk.

Thanks!

I think the struts that are replacing the older style are a standard "heavy duty" strut. The struts are listed for a fastback but that listing changes to a newer generic type so it can fit on both models. I think these would be your best bet in getting the support you need in the hatch.

[MidwayParts]

The camera was dead so it will be later tonight or tomorrow. The cover fit like a glove. I mean perfect. Has the little mirror booties and all. I was a little scared of the price, but if you are looking for a great fit and great quality material get it. It is worth the money.

Great. I never expected it to be blue, though. I usually see them come in gray or white. Does it have the Nissan logo?

[VitaminT]

Yeah it has the Nissan logo in black and the cover is bright *** blue. I don't care. Grey would have been better (read low key), but it fits great and that makes up for it.plus I might dye it, you never know.

[MidwayParts]

Yeah it has the Nissan logo in black and the cover is bright *** blue. I don't care. Grey would have been better (read low key), but it fits great and that makes up for it.plus I might dye it, you never know.

Now I really cant wait to see pics.

[onosqv]

I think the struts that are replacing the older style are a standard "heavy duty" strut. The struts are listed for a fastback but that listing changes to a newer generic type so it can fit on both models. I think these would be your best bet in getting the support you need in the hatch.

Is there any way I can see a picture or diagram of what the strut looks like? There is no illustration on the web page for this one.

Mine looks like this right now:

I've seen the hatch strut and have no clue how to make that work with my existing set up.

Thanks a lot for your help.

[KFL]

Thanks got a ? does the link come with bushings? or alone..

The end links are $13.99 each (factory)and those can be found here:http://www.trademotion.com/par...gid=1

Give me some time to find you the Nismo ones.

[MidwayParts]

Thanks got a ? does the link come with bushings? or alone..

The link does not come with bushings. They are about $2 each, though. Here's a pic:

[MidwayParts]

Is there any way I can see a picture or diagram of what the strut looks like? I've seen the hatch strut and have no clue how to make that work with my existing set up.

Thanks a lot for your help.

Here's a pic from my catalog:

Here's a bigger picture:

[MidwayParts]

I'd like to take a second to thank everyone who participated in the August Special of either a copy of Project Gotham for the Xbox or GT4 for the PS2. Just some info, everyone who entered the contest opted for the GT4 game. I guess that means PS2 is the official game of Nico.

Anyway, I'll be announcing the winner over the Labor Day weekend. Once all of the orders are tallied, every order will be given a number and then I'll pick a winner by drawing from a hat. Once the winner is picked, I'll post him on this thread so they can brag that they will be one of the first to own GT4. The winner will get a confirmation email from the store that is shipping the game.

Thanks again to everyone who participated.

[AZhitman]

OOOOOH!!!!

*fingers crossed*

[VitaminT]

Now I really cant wait to see pics.

Sorry it took so long. If forgot about taking them.



Enjoy.

BTW...can you get new Nismo steering wheels? If so how much are they and also how much is the GT rubber shift knob. I think they make it in metal and rubber. It might be called the gT2.

[VitaminT]

BTW for those who might be interested it comes with a bad to put it in when not on the car.

Also note that the inside seems to be gray, but the cover did not look as if it was reversable (i.e. all the stitching shows).

[glitched]

I'd like to take a second to thank everyone who participated in the August Special of either a copy of Project Gotham for the Xbox or GT4 for the PS2. Just some info, everyone who entered the contest opted for the GT4 game. I guess that means PS2 is the official game of Nico.

Anyway, I'll be announcing the winner over the Labor Day weekend. Once all of the orders are tallied, every order will be given a number and then I'll pick a winner by drawing from a hat. Once the winner is picked, I'll post him on this thread so they can brag that they will be one of the first to own GT4. The winner will get a confirmation email from the store that is shipping the game.

Thanks again to everyone who participated.

curious: were u originally plannin on giveing away a copy of both games? or just whatever game the winner picked?

anyway, any ideas for a september special yet? maybe due to it being so popular another gt4 giveaway

[MidwayParts]

BTW...can you get new Nismo steering wheels? If so how much are they and also how much is the GT rubber shift knob. I think they make it in metal and rubber. It might be called the gT2.

I saw a listing for a Nismo cap for the MOMO wheel but as it turns out, I dont have those. The shift knobs listed for your vehicle are the ones I mentioned before. Here are the knobs listed in my book.

Nismo polished aluminum - 10mmNismo black aluminum - 10mmNismo titanium 10mmNismo aluminum with carbon fiber insert - 10mmNismo titanium GT race knob - 10mmNismo titanium GT race knob - 12mmJDM special edition black leather w/ red stiching - 10mmoptional 180sx Navan shift knob

Those GT knobs are $135 each

Thanks for the pics. It does look very nice.

[MidwayParts]

anyway, any ideas for a september special yet? maybe due to it being so popular another gt4 giveaway

Thats a very good posibility. We'll have to see next week.

curious: were u originally plannin on giveing away a copy of both games? or just whatever game the winner picked?

Nope. It was a choice between the two

August Special

Hi everyone. Just wanted to announce my August special:

This month, all orders placed will be entered into a drawing to recieve a copy of your choice: Gran Turismo 4 for the playstation 2 or Project Gotham 2 for the XBOX.

Hey glitched, how bout Halo 2 this time?

[NotDave]

im not sure if its been asked before but can you source the factory nismo/xenon lip for 91-94 s13s?

[amolao]

need the timing cover for 1989 240SX , please contact me ASAP..... How much for a new one????/ I know is a long weekend but maybe you have a price list at home or something.....

[MidwayParts]

need the timing cover for 1989 240SX , please contact me ASAP..... How much for a new one????/ I know is a long weekend but maybe you have a price list at home or something.....

Its $81.85. I can check availability on Tues. Sorry about the delay this weekend.

[MidwayParts]

im not sure if its been asked before but can you source the factory nismo/xenon lip for 91-94 s13s?

Here is the front spoiler.http://www.trademotion.com/par...gid=2

Thanks and let me know if I can help any more.

[MidwayParts]

Again I'd like to thank everyone for participating in the drawing this last month. The winner of the PS2 Gran turismo 4 is:

Shawn Anderson

Congratulations Shawn and thanks for the buisness.

Stay tuned this week. Im announcing a new contest. Its gonna be just as or even better than, last month's. Hope everyone had a great holiday weekend and see you all on the next thread.

[MidwayParts]

Its $81.85. I can check availability on Tues. Sorry about the delay this weekend.

Hey L, Ive got that cover if you need it.

[180fan]

Hey dantech, how much is the actual metal bumper part (that sits behind the foam) for a 91 240sx (also if you could get the part # that'd be awesome). Any chance of that gb price you had for the kouki's of 410+s&h still available too? *crosses fingers*

[glitched]