August Special - MidwayPartsTeam.com

[MidwayParts]

August Special

Hi everyone. Just wanted to announce my August special:

This month, all orders placed will be entered into a drawing to recieve a copy of your choice: Gran Turismo 4 for the playstation 2 or Project Gotham 2 for the XBOX.

Be sure to mention this special when you place your order and thanks for looking.

:arcadefre

[Dano]

that is one sweet deal, id have to go after the Gran Turismo 4 myself! Midway is awesome! who else hooks u up with badass promotions like free hats and video games on top of badarse pricing?:ylsuper

-Dan

[AZhitman]

Score!

I'm definitely in for this one!

[MidwayParts]

Hey guys. Thanks for the response. Its been amazing.

I wanted to take a second to bump this thread. Ive gotten a bunch of orders in and some arent specifying which special they want. I understand that some of you dont "console game" and the game isnt really on your list. If thats the case, let me know your not interested in the game and want the free hat instead. Ill hand those out till they are all gone and then get a new promo for all the great members here on Nico.

Im an Xboxer myself and the two games I picked are awesome, both in there own rights. I would love to get PG2 but sadly, am not eligible.

Thanks again for all the responces. And remember to specify which special your interested in on your orders.

[MidwayParts]

:arcadefre

[MidwayParts]

:hiding:

[Exar-Kun]

sweet. I have a bevy of parts requests, none of which are particularly expensive..but I need part numbers to order them(I tried the online catalog, and am far to lazy to pick up a phone)

1. The lower finishing plate screw for the headlights on my 1994 fastback(pop ups), its the little screw that holds the silver square metal plate onto the headlight itself, thusly holding it into the popup unit2. rear strut mount bolts(where the upper mount bolts to the frame/unibody) I need 2 of these.3. oil pressure sending unit and whatever gasket comes with it that goes between the block and sending unit

thanks!-chet

[MidwayParts]

sweet. I have a bevy of parts requests, none of which are particularly expensive..but I need part numbers to order them(I tried the online catalog, and am far to lazy to pick up a phone)

1. The lower finishing plate screw for the headlights on my 1994 fastback(pop ups), its the little screw that holds the silver square metal plate onto the headlight itself, thusly holding it into the popup unit2. rear strut mount bolts(where the upper mount bolts to the frame/unibody) I need 2 of these.3. oil pressure sending unit and whatever gasket comes with it that goes between the block and sending unit

thanks!-chet

I think the screw your looking for is the one in this picture #26010a. If thats it, its $.53

That strut bolt can be found here:http://www.trademotion.com/par...gid=2

That sending unit can be found here:http://www.trademotion.com/par...gid=1

It doesnt really have a gasket or seal but a mechanic here said you should use liquid teflon to seal the threads into the block.

Thanks. Let me know if I can help.

[Exar-Kun]

dan, thanks for the reply, but what I am looking for isnt the bolt itself, its the nut that locks down on it from the top...

also, the screw I need ties part 26023-w7600 into the housing to hold my headlight in, I'm missing one on each side...I dont see a listing for the actual part number...I may just have to goto a junkyard and find it, or math one up at the hardware store sometime...

thanks a bunch!-chet(I may have to goto a hardware store and get all this huh? I'd rather give you guys the business...)

[MidwayParts]

dan, thanks for the reply, but what I am looking for isnt the bolt itself, its the nut that locks down on it from the top...

also, the screw I need ties part 26023-w7600 into the housing to hold my headlight in, I'm missing one on each side...I dont see a listing for the actual part number...I may just have to goto a junkyard and find it, or math one up at the hardware store sometime...

thanks a bunch!-chet(I may have to goto a hardware store and get all this huh? I'd rather give you guys the business...)

Heres the picture for that strut. Looks like that nut is number 01225-00102. They are $.60

I think you may need to make that trip to the hardware store on the screw. I cant find a size for it.

[Exar-Kun]

55040B in the pic, right? thats the one I need

I tried typing in the part number you gave me above, but it didnt come up?

should I just call in, or ca I leave a message with the order for the sending unit that I want that part?-chet

[MidwayParts]

55040B in the pic, right? thats the one I need

I tried typing in the part number you gave me above, but it didnt come up?

should I just call in, or ca I leave a message with the order for the sending unit that I want that part?-chet

Just give me a call. I'll be here till 6 (AZ). That other way would work too. Just order the sender and I'll put the screw with it (that sounded really bad). Thanks

1-800-321-6926 ext 47740:D

[glitched]

uh oh

i was looking at ordering some new valve cover gaskets (rubber seals) but im confused now, i bought a really nice painted cover from a 95 that i assumed i could use on my 92 (so i wouldnt have much down time painting the cover) but when i went to look the gaskets were different priced for the different years, i wish i could see the part numbers to see if they were the same.

[Exar-Kun]

the valve covers are different, one has I think 4 bolts in the center, another has 3...IIRC.

hah.-chet

[glitched]

the valve covers are different, one has I think 4 bolts in the center, another has 3...IIRC.

hah.-chet

the 2 covers i have look identical, they both have 3 bolts in the center

[Exar-Kun]

check the bolts on the outside....jerome ran into this problem on his car, he polsiehd an s14 valve cover and it didnt bolt onto his s13 KA...-chet

[glitched]

i held it above the one on the car and from what i saw all the holes lined up, with no extra holes. the guy i bought it from said he sold it cause it wouldnt fit his 97

[N.O. Accorderz]

whats the price for the carpet...93 se fastback...and do you know if they come pre slotted?

[VitaminT]

How much for an OEM car cover? 93 240sx

[MidwayParts]

whats the price for the carpet...93 se fastback...and do you know if they come pre slotted?

The carpet is $444.69. They come pre slotted and ready to fit. I'll need to know what color when you order. Let me know if I can help.

[MidwayParts]

How much for an OEM car cover? 93 240sx

It is $120.00. I dont have any but it shouldnt take long to get. Thanks.

[MidwayParts]

i held it above the one on the car and from what i saw all the holes lined up, with no extra holes. the guy i bought it from said he sold it cause it wouldnt fit his 97

I hope this helps a little. The numbers are different hence the different price. Here is the pic of a 92.

[MidwayParts]

i held it above the one on the car and from what i saw all the holes lined up, with no extra holes. the guy i bought it from said he sold it cause it wouldnt fit his 97

glitched, here is a pic of a 95.

[VitaminT]

It is $120.00. I dont have any but it shouldnt take long to get. Thanks.

Is the cover made to fit my car or just a range of cars my size? Also do you know what color it is and if it has elastic (sp?) at the bottom. My current cover (el' cheapo) flys into the road on windy days.

Also can you get the Nismo leather shift knob and if so, how much.

[MidwayParts]

Is the cover made to fit my car or just a range of cars my size? Also do you know what color it is and if it has elastic (sp?) at the bottom. My current cover (el' cheapo) flys into the road on windy days.

Also can you get the Nismo leather shift knob and if so, how much.

Thats the official Nissan accessory car cover. They also offer a cable lock if you like. There are four shift knob available. 1.5spd dark gray2.5&6 spd white ball3.5&6 spd black ball type4.5spd blk rubber racing

I'll see if I can find some pictures.They are all around $35-$40Thanks

[VitaminT]

I think the dark gray one is the leather one. A pic would be nice. And how much is the cable lock. Is it a separate piece or a different cover with that built in.

[Exar-Kun]

order sent! thanks dan!-chet

[MidwayParts]

I think the dark gray one is the leather one. A pic would be nice. And how much is the cable lock. Is it a separate piece or a different cover with that built in.

The gray leather one is $32. The cable lock is $7.50. Im still looking for a picture of the knob.

[VitaminT]

When you get it just let me know. If you can get it for $32 I will probably do it and the cover/lock.

[MidwayParts]

here is a picture.