Atl 240sx Owners, check in!
-
GrubyFngaz
- Posts: 459
- Joined: Wed Jul 24, 2002 2:31 am
- Car: 2001 Infiniti QX4
GrubyFngaz wrote:No, I know Eric, I have known him for a while. His shop closed down or moved, b/c he isn't there anymore. This car is a bright red like mine and it is a 97-98 model. But I will defiently stop and say hey if I see you around.Josh
hmmm...i havent seen that one around. ill have to keep an eye out for it.
-
9095240SXDUCK
- Posts: 2673
- Joined: Sun Aug 10, 2003 5:49 pm
- Car: 240SXs
-
Drill_Sergeant
- Posts: 117
- Joined: Fri Feb 06, 2004 8:54 am
That Eric guy yall are talking about was the owner of E&E Motorsports. He wasnt getting good enough business at his shop so he moved in with turbodave off of Frank Aiken rd. Their new shop is in a word, Bad *** . Turbo dave is known for his custom work. They have a twin turbo Toyota tocoma up there that runs 9's on the stock bottom end. We see eric a lot and im going up there again sometime to get turbo dave to make me custom exhaust for my ca18det.
. Turbo dave is known for his custom work. They have a twin turbo Toyota tocoma up there that runs 9's on the stock bottom end. We see eric a lot and im going up there again sometime to get turbo dave to make me custom exhaust for my ca18det.-
GrubyFngaz
- Posts: 459
- Joined: Wed Jul 24, 2002 2:31 am
- Car: 2001 Infiniti QX4
If you go down Corner Rd., cross over Macland Rd. and continue going down Florence Rd. When you come to the red light at Hwy. 278 keep going straight. Then go until you dead end. Then take a left and go up through down town Powder Springs. Once you get to a Bar-B-Q place take your next right. Go straight through a couple of stop signs and then you will see a road on your right with a bunch of like custom car shop places. Its down on the left. Hope that helps.Josh
-
bokinsmowls
- Posts: 112
- Joined: Mon May 10, 2004 6:31 am
- Car: Should be obvious
-
accel junky
- Posts: 1108
- Joined: Thu Apr 01, 2004 7:22 pm
- Contact:
Sup Guys, we moved about a month ago, our land lord got tired of us doing our work in his building, said he didn't like all of the cars around, so he forced us out of our building, so we teamed up with Dave over at CPF, and moved in over there, being in that shop now, we can build anything for the 240, lately we have been doing rb swaps out the ***, and that seems to be about it, haven't had any sr swaps in a while. Josh, swing your car by here if you want that B&M installed, if you haven't already done it, USDM240, have we ever been by our old shop? That MCs14 might be mine, I just recently went to the 98 front end.
Erichttp://www.e-emotorsports.com/turboka.php
Erichttp://www.e-emotorsports.com/turboka.php
-
GrubyFngaz
- Posts: 459
- Joined: Wed Jul 24, 2002 2:31 am
- Car: 2001 Infiniti QX4
Re: (GrubyFngaz)
Jaypat, that wasn't me, It was another guy on the boards. Our cars look exactly alike, I got the idea for the wheels from him. He's really cool and his cars nice as well.Josh
-
ilovedrifting
- Posts: 689
- Joined: Sun May 09, 2004 9:23 am
- Car: skateboarding and drifting
Re: (Camel)
sounds great, just give me a 2 week advance on the date so i can get off work, i always miss meetings because of work
-
ilovedrifting
- Posts: 689
- Joined: Sun May 09, 2004 9:23 am
- Car: skateboarding and drifting
Re: (Camel)
yes i would be interested, it was great fun last time, met alot of great people!
i have school now though so it would probobly have to be on a saturday or somthing like that
i have school now though so it would probobly have to be on a saturday or somthing like that
Re: (scruffy63)
potato pizza is DAMN good
-
ilovedrifting
- Posts: 689
- Joined: Sun May 09, 2004 9:23 am
- Car: skateboarding and drifting
Re: (scruffy63)
glad everything is good, i couldn't get a hold of you to tell you and i felt like such an *******
