ANYONE HAVE PIX OF LOWERED AC ON LOW PRO 19S??

All things Altima Coupe.
User avatar
Bmore-coupe
Posts: 6440
Joined: Fri Sep 26, 2008 4:00 pm
Car: 08 Altima Coupe 3.5
Location: Baltimore, MD

Post

adidas2go wrote:Yup, 235/35/19's. Dunno if the STILLEN front fascia moves it back, but mine have rubbed a hole in my forward splash guard
Weird, I have 245/40/19's with the same setup and no rubbing issues


User avatar
08coupedriver
Posts: 607
Joined: Tue May 20, 2008 3:23 pm
Car: 2008 Nissan altima coupe 3.5SE CVT

Post

Bmore-coupe wrote:
Weird, I have 245/40/19's with the same setup and no rubbing issues
Even with people sitting in the back seat no rub?

Thanks just asking because that is FINALLY going to be my next mod

User avatar
Heels1010
Posts: 489
Joined: Thu May 15, 2008 6:57 pm

Post

loop ur back. nice pics just added them to my loop picture book lol. my favorite coupe.

User avatar
adidas2go
Posts: 4495
Joined: Thu Oct 18, 2007 9:49 am
Car: Cycle through all kinds of cars, trucks, motorcycles, and boats 🤙
Once upon a time: 1st turbo Altima Coupe
Location: Raleigh, NC

Post

Desire1314 wrote:
Hmm, possibly. Im planning on going with the lip on the front, so it shouldnt be a problem.

Your rears are totally fine though right?
Yea, my tires dont rub the top of the fender or anything, just the front tires rub the forward part of the splash guard. Robert and I have come to the conclusion though that my car sits lower that the regular Eibach Prokit for the Altima Coupe. When our cars are parked next to each other, I am a full inch or so lower than him. Not sure why, but maybe the design of it being lower lets the suspension give a little more. I do A LOT of canyon running in my car too though.

bunda4th
Posts: 487
Joined: Thu May 15, 2008 12:14 am
Car: 2008 Nissan Altima Coupe 2.5S 6MT

Post

It might be the extra weight from the turbo kit, making the front lower. I am on coilovers and I rub :D. The front rub and during a canyon run it pretty much rolled the front fender pretty well lol.

For the rear I just recently install 20mm spacers and it ate a bit of my tires but got that problem fix by rolling the fender.

User avatar
maxentropy
Posts: 1755
Joined: Fri Oct 12, 2007 7:25 am
Car: '08 Altima Coupe 3.5SE
Location: Collegeville, PA
Contact:

Post

Bmore-coupe wrote:Weird, I have 245/40/19's with the same setup and no rubbing issues
I have 245/40/19s too, but what size are your wheels? Mine are 19x8 +30 Offset.

Offset is what screws you usually.

I rub barely when I have folks in the back seat or go over nasty bumps/potholes. I don't recommend +30 offset with 19s.

User avatar
Bmore-coupe
Posts: 6440
Joined: Fri Sep 26, 2008 4:00 pm
Car: 08 Altima Coupe 3.5
Location: Baltimore, MD

Post

maxentropy wrote:
I have 245/40/19s too, but what size are your wheels? Mine are 19x8 +30 Offset.

Offset is what screws you usually.

I rub barely when I have folks in the back seat or go over nasty bumps/potholes. I don't recommend +30 offset with 19s.
pretty sure that my offset is +35


Return to “Altima Coupe (2008-2013)”