angle problems

[240probs]

How is it going guys! Im new here obviously 1st post. I have a problem most will call me dumb but oh well.... So ive researched and I cant find anything at all but... I cut about 1 3/4 inch out of my knuckles on my s13 and the car turns awesome I did vertical welds im not dumb.. anyways ive come into a problem.

There are plenty of set ups for s14 that makes rubbing go away.. but my stock alloys rub on the tension rods and sway bar. I know pbm and other makers make kits for s14 that virtually remove the sway bar and angle the tension rods and flca in one....so is there anything for s13 or am I just superscrewed I should have researched before cutting and hacking my knuckle. so I made a noob mistake and I need some help. what can I do to not rub and get full lock!

[PapaSmurf2k3]

Check out voodoo13.
http://voodoo13usa.com/product-category ... 240sx-s13/

[2_Liter_Turbo]

You can get tension arms that have the offset as linked to above. that will definitely give you some more leeway. Where did you reposition your tie rod mount to? Did you change your ackermann at all? If you moved your ackermann so you have closer to parallel steering like some people do, it could be causing your problem.

[240SXmotoring]

we carry some offest arms that will help out
http://www.240sxmotoring.com/voodoo-13- ... 240sx-s13/
http://www.240sxmotoring.com/isis-perfo ... 89-94-s13/

[PapaSmurf2k3]

^Yes! Definitely check out 240sxmotoring.com. Those guys rock.

[240probs]

Id post a picture but i dont know how the tie rod mount is right were the knuckle is and im ganna have to pick those tension rods up but the sway bar still hits as well im ganna have to cut a chunk of frame out as well and reweld because i dont want any rubbing not a large chunk just small and reweld bent metal in its place ive pounded the pinch welds in and it still hits how do i post pics?

[240probs]

Ive also browsed pbm but all the good angle mods are for s14 like the kits trying to accomplish reverse entry because my buddy has a track in his yard few hundred acres and has a full track in his yard he made and there is a reverse entry corner he can make but i cant so.. I need some help showing my friend up he has a s14 and ae86 i have this missle s13 coupe

[240probs]

If i can get pictures to work ill post pics of his car my car and track he has made

[240probs]

I just fully read 2 liter turbo ok my tie rod mount is on the knuckle on the bottom the arm that the tie rod mount is attached to is completely gone its just knuckle and tierod mount on the bottom close to pbm angle knuckles but not the same shape i guess

[PapaSmurf2k3]

Here's a pretty good outline on how to post pics:
how-to-post-pictures-using-photobucket-t521110.html