a laying thief jason sink (jrsink)

[sjbsuperman1425]

maybe someone should start a thread for feedback and it should be stickied??

[boost_boy]

A little something for all of you and you all can take it for whatver it's worth. We all have cars that have many engine options, but we chose the smaller-cheaper engine. We get very little respect because we've associated ourselves with this engine, so people tend to think we are bastards with no true insight on cars and engine choices. For whatever reason Mr. jrsink chose the CA, he found a way to do what he want with it and dump the remnants on poor unsuspecting patrons like yoursleves because everyone is aware that CA owners are cheap (at least some of us) and most would not pass on a chance to get some parts for cheap. News flash guys, if you all continue to jump on every "CA18DET part-out" or every "For sale" thread, you all are no better off than those having unprotected sex because you have the faintest of clues as to who or what you're dealing with. And I guess we mods can tighten-up some too by directing those members with very little NICO loyalty or history to print their junk in the classifieds, so that we can keep these for sale issues off the CA forum.

I will personally monitor those who are selling or attempt to sell stuff that are not familiars and when I say familiars, I'm talking about folks who have added some input and has had some success with their equipment. Too many failed projects that result in the CA forum turning into a CA parts flea market and mostly from people who pop-up off another forum to dump their junk on poor/desperate NICO CA members who are low on cash, but looking for a bargain on must have parts.

We are all at fault and it will require all of us to remain vigilant from here on out. And for the record, if you don't have money to play with turbocharged cars, you should not be playing. Boosted toys are not cheap, regardless of what the initial costs were. And lastly, cheaping-out on critical parts will almost certainly be your project's demise. As I expleined before, cheap trickery will cost you much more in down time, headaches, and most importantly, the infamous selling of your project.

The CA is a wonderful little engine, that I personally get to enjoy in different formats depending which mood I'm in (FWD/RWD). I don't experience the failures you guys go through because I've been down the road some of you guys consistently travel and had personally had enough. The crappy eproms that I used cost me engines, so I broke-out and started doing my own tuning. Now, there isn't a CA or any engine for the most part that I can't tune or build and I can honestly say that the remedy for getting the most out of a CA is """""Stop being cheap-@sses"""""

If you don't have the ability to do it yourself, but you gotta have it, pay someone with knowledge of said application to do it right the first time. I can't make you guys take advantage of the advice, but I can sure as hell get a laugh off your stories after one has failed to take heed to the help that experienced members have tried to offer. Good luck to all, but please think before you commit your hard earned money.

You guys' friend,

Dee

[sjbsuperman1425]

Dee..you are like Ghandi with the CA it seems lol

i will admit i dont have the best of cash, but am in NO WAY a cheap a** as some might be. idk if im considered a "regular" here or not, nor do i care, or if my opinion is respected, but i try and do it the RIGHT WAY and if i can't afford it like that, i wait..i've made a few short cuts with miniture issues, but would never skimp on the importatnt things..

i could be one of those guys who made a boost controller and set the CA turbo to 15psi and say "eh its fine"..i made one, hit 15psi once at the lowest setting of my DIY Boost Controller and asked my friend with an RB25 (needed head work due to SMIC shards escaping..) if he wanted it and am giving it up to him when he gets it running.

i sometimes forget what the hell i am actually driving around town when i get into my car..but everytime i come back here i remember that i have the CA and just fall in love everytime and haven't looked back at my choice to buy this over an SR..JAP speed everyone and your CA!

[boost_boy]

Dee..you are like Ghandi with the CA it seems lol

i will admit i dont have the best of cash, but am in NO WAY a cheap a** as some might be. idk if im considered a "regular" here or not, nor do i care, or if my opinion is respected, but i try and do it the RIGHT WAY and if i can't afford it like that, i wait..i've made a few short cuts with miniture issues, but would never skimp on the importatnt things..

i could be one of those guys who made a boost controller and set the CA turbo to 15psi and say "eh its fine"..i made one, hit 15psi once at the lowest setting of my DIY Boost Controller and asked my friend with an RB25 (needed head work due to SMIC shards escaping..) if he wanted it and am giving it up to him when he gets it running.

i sometimes forget what the hell i am actually driving around town when i get into my car..but everytime i come back here i remember that i have the CA and just fall in love everytime and haven't looked back at my choice to buy this over an SR..JAP speed everyone and your CA!

I'm not trying to give y ou a hug or anything like that...LOL , but at least I see you trying to help when you can and I can see those members who have learned some things and those who just whine and beg for information, yet they don't take heed. Mom always told me as a young jitter-bug that a hard head makes for a very soft @ss and I suspect there's plenty of soft @sses that have come and gone through the CA community .

Dee

[ca18detgabby]

I'm not trying to give y ou a hug or anything like that...LOL , but at least I see you trying to help when you can and I can see those members who have learned some things and those who just whine and beg for information, yet they don't take heed. Mom always told me as a young jitter-bug that a hard head makes for a very soft @ss and I suspect there's plenty of soft @sses that have come and gone through the CA community .

Dee

I havent seen anyone give up around here

its sad really. it does seem to be alot of crying and pissing and moaning time and again with the same 4-5 questions. then a nuked this or nuked that because some common sense was negleted and corners were cut...

then the MOTOR gets blamed. like it told you to run the car w/o the waste gate line attached.

[NeedCAforS13]

Just an FYI,

Jason Sink AKA Orvell Redenbocker (LOL at his aliases), is currently incarcerated at Falkenburg Road Jail in Tampa, FL. Might be why he's not texting you back...

http://www.hcso.tampa.fl.us/pu...26854

He's a decent guy. He's not out to screw anyone. He doesn't always make the best decisions, and he's no genius, but he's not a bad guy.

P.S. that CA crank was fine (if it's the one I sold him a while back, which I assume it was and not the one he spun a bearing on...). It was out of an old motor of mine that cracked a piston, but was otherwise mechanically fine. It sat in my garage for 4 years, so it probably needs a polish job to get some surface rust off, but it WAS in good usable shape.

Some of you guys are babies. I don't see anything seriously WRONG with that head, other than the fact that it's USED. This is why I don't deal with 99% of 240sx owners these days. This motor is going on 20 years old now guys. This crap is not going to be mint, and you're certainly not paying top dollar for parts.

[NeedCAforS13]

And one last thought. Don't get me wrong, I HATE drug use. I am as straight edge as they come, and I am in no way supporting his decisions, but being locked up for marijuana possession is complete bull. There HAS to be some more deserving criminals out there.

I'll get off my soapbox now... haha.

[r34 gtr]

Well I can sympathize there. I too have been to jail. Not exactly fun, I can tell you. I can think of better ways to spend my time than getting raped by a huge black man named Molly.

[The_Chosen_One]

Damn Tim so you're admitting to being raped in the a** by some big black man named Molly.

[ragenasian]

He wasn't a bad dude with me just seemed a little confused or at least didn't have everything in order but it all worked out.

Sucks to get busted for something so minor too.

[r34 gtr]

Damn Tim so you're admitting to being raped in the a** by some big black man named Molly.

In all fairness, he was quite gentle.

[Cams]

Jail time for Tim -->

I guess I got lucky in my business with Mr. Sink. Even tho he took ages to ship the alternator I bought from him, it got all the way down here (to Panama) in one piece. Oh well, next time will buy from the well known CA "dealers".

[kn13]

at least someone was able to tell us why he hasn't responded to any of our e-mails. i had asked for the whole intake manifold in april 2nd yet he hadn't shipped it yet. *sigh* luckily for me i'm in no rush for the parts.

even still, waiting for parts is a pain. feel bad that he got locked up and will have to wait even longer now since once he gets out, he'll most likely have no money to even ship the parts out =(

[boost_boy]

at least someone was able to tell us why he hasn't responded to any of our e-mails. i had asked for the whole intake manifold in april 2nd yet he hadn't shipped it yet. *sigh* luckily for me i'm in no rush for the parts.

even still, waiting for parts is a pain. feel bad that he got locked up and will have to wait even longer now since once he gets out, he'll most likely have no money to even ship the parts out =(

You're never in a rush for parts . Is this an honest attempt to be a parts hoarder? The CA forum is a cheap-@$$ flea market that becomes more attractive by the hour .

Dee

[kn13]

You're never in a rush for parts . Is this an honest attempt to be a parts hoarder? The CA forum is a cheap-@$$ flea market that becomes more attractive by the hour .

Dee

part hoarder? yeess... well not really. i'm getting parts for my brother's det setup but he ran out of funds due to his car crapping out on him and having to get another car to drive. so he has to hold off on the turbo swap while he tries to get another car and save funds again. lil brothers... go figure =/

[dattodude]

Yay, just checked the record.Jake the Snake got out last week!

It's amazing the details they make public..

[ca18detgabby]

not to stir the pot

http://www.floridadrift.com/ph...25805

[Nali]

not to stir the pot

http://www.floridadrift.com/ph...25805

This guy is still on NICO.

zer...e-125

[fabio240]

WoWZerZ!!!!

[r34 gtr]

Yeah I just saw dude's thread in 240 gen. Seriously, you think he would have found this thread by now, or at least I thought he might see it and lay low.

[Logan76]

Oh he probably seen it and just ignores it, some people should man up and do the right thing.

[sjbsuperman1425]

well suck my c0ck and call me your brother what a little C**T! That basically tells us that he is NOT a seller to be trusted on here, or anywhere for that matter. Karma is a b1tch and he will eventually get it all right back

[jrsink]

first off i would like to thank the fourm godfathers for making this forum nice but scumbags still get in ones like jason sink i bought a head from him that was in "good condition" along with a brand new oem head gasket what i recieved was a head missing a cam shaft all the lifters and bearring caps thrown around in the bottom of a box and a crushed head gaskety that was thrown under the head i received a riped open bag of parts rolling around in a box thats partly open upon closer inspection of the head i notice that at least 4 of the valve seals were leaking and there was pine needles in the intake ports and all over the head my head gasket was completlt destroyed being folded over multipul times and ripped the journals of the head for the cams also had rust in them oooh not to mention i paid above and beyond what he asked for it because after i said i would give him money he said he sold it again so i had to pay more to get it and it took a mounth to ship it out i had to put in a claim in to paypal and on the tenth day he sent it out over a month later!!!!!!!!!!!!!!!1 i dont have any emails because i did it threw txt and just so you know i paid 300 no what he wrote down as askinghttp://forums.nicoclub.com/zer...age=1



Modified by badintentions at 4:14 PM 5/5/2009

WOOOOOOOOOOOOOOOOOOOOOOOW!!! holy s***. i am very sympathetic to your complaints man but lets get this strait man.

you know damn well io told u it was coming with only one camshaft. YOU KNEW THAT!! you said "its cool, im gettin cams anyway"

second,sorry, it wasnt packaged that well, i bought the bubble s*** from ups thats all they had and i bagged up all the pieces for u in that ziplock bag that it came with, that sux if it came open. im not a professional shipper.thats the best i could do really.

also, i told u i was giving you the headgasket for free, so u lost nothing there really, you paid for the head, the headgasket was brand new, apparently the whole box had a long hard journey, that really sux bad, again. i packaged it as well as i could buying all needed packaging from them.they even helped me package it in the store, they said it looked fine, when we sent iit out.

I do again apologize for the untimelyness again. You failed to mention that when u kept texting me about the package not showiung up, I TOLD YOU THAT YOU SHOULD FILE A CLAIM SO THAT YOU WOULD BE INSURED A GUARANTEE FROM PAYPAL IF IT WASNT SHIPPED OUT BY THEIR DATE. i complied with their date.

the head has surface rust consistent of a motor being pulled out of a car, and sitting around at my house for a month or so before i found a seller. the head is in great condition, my oil pump failed and killed my bottom end.

and I TOTALLY TRIED TO HELP YOU OUT SELLING IT TO YOU EVEN THOUGH SOMEONE HAD DIBS ON IT ALREADY.

im sorry you are dissatisfied. but i am not a scumbag douche bag scammer, just another automotive enthusiest trying to hook up this community with my leftovers. CA s*** is not that plentiful.

i never promised i would clean anything or prep anything for this head for you. i just ripped it out and packaged it for you. it sat in my car for a couple months before i even thought about parting the motor.i dont have inside storage at my house for stuff like this.

just wanted to get some facts strait. thank you


Modified by jrsink at 5:19 PM 6/9/2009

[jrsink]

I thought he said a cam was missing? Dont quote me I am on my iPhone so it's difficult to navigate. Goodluck with solving it.

the cam was the first thing i sold in the part out clear as day to everyone viewing the original thread. and no he never put any type of refund thru, just an insulting text when he recieved the package. again i am so sorry u feel scammed

[jrsink]

granted it wasnt nearly that much money.......... but Jason did refund me money when he couldnt deliver something to me.

think you need to contact him. do think in the past Jason has had shippingg issues too, but I coul be wrong.

im not the best shipper its true : ( i do my best

[jrsink]

Yes, he had shipping issues in the past with some valve covers. They were recieved broken.

I was going to buy the motor from the guy, but he took forever to pull it. By the time he was ready to pull it, my schedule didn't allow me to buy it. Would not recommend buying from him, as he doesn't seem to take it seriously enough to satisfy his buyers.

In either case, try to resolve it on your own. If not, get a text transcript.

AND YOU! i pulled the entire motorset out FOR YOU.bc you told me you were copming down to pick it up three weekends in a row, and completely bailed, no phone calls no texts nothing. maybe his head wouldnt have had so much surface rust if i never took it out for YOU in the first place. i was pretty pissed when you bailed on me man for real. 300 for the whole motorset would have been a steal for yiou too, YOU KNOW IT

[jrsink]

WOW...ive been going through some bs with jrsink too. i sent money for the engine mounts back in march and he said he would ship it out when paypal clears, like racemydatsun said, but he never shipped out. i gave him 2 weeks from the time i sent money for him to ship it, and when i went to see what the hold up was, he told me he was on vacation or something and that hed ship them as soon as he got back home so i was like, fine ok...then comes april and he still never ship it out so i ask him whats up and he tells me he needs a ride/is working/or some other lame excuse. fed up, (and because i totaled my coupe), i told him i didnt need them anymore and that i wanted my refund...i went through paypal to get a refund...he agreed and apoligized, AND told me he sold them locally anyways MF...that was almost 5 weeks ago, from apr 27 to be exact, and i still havent received a refund. last i talked to him he told me he doesnt have the money and that he has other claims going on which is why his acct is in the negatives.

whatever man that not my business but basically, since you sold them locally, you should have MY 80 bucks AND the other guy's 80 bucks, so wheres my refund??

i literally just got off the phone with payapl and they said they were able to recover the funds, BUT his bank accts failed to refund the money or something like that. so basically they told me im just gonna have to wait for this sob to put money into his acct. b****.

yes my account is still in the negative, i issued you a refund the day i said i would, but i have temporary claims right now that will not allow me to send you the money unitl they are resolved. thats the word

[jrsink]

Yeah I paid him for a block, girdle, oil pan, and crank which were al supposed to be in good condition 6 weeks later I get a damaged crank and thats it. He wont reply to my text messages or anything now.

the crank was not damaged. HOW? i got it from ca sean on here needcafor18, i bought it from him to ship to you. i made nothing on it i was just trying to help you out, i kept my fuct crank. and yes i still do have the black and oil pan for you..sorry

[jrsink]

at least someone was able to tell us why he hasn't responded to any of our e-mails. i had asked for the whole intake manifold in april 2nd yet he hadn't shipped it yet. *sigh* luckily for me i'm in no rush for the parts.

even still, waiting for parts is a pain. feel bad that he got locked up and will have to wait even longer now since once he gets out, he'll most likely have no money to even ship the parts out =(

i got you still man. i just got out last wekk, i got all my stuff in a storage unit. also i found a whole new gasket kit ;aying around that ill ship out to ya too : )

[sjbsuperman1425]

i retract my previous statements due to ignorance on my part.