RB25 Series 1 ECU $75
Rb25 Valve covers $70
RB25 Coil pack cover $30
RB25 cam angle sensor bracket $45
Rb25 timing cover $25
Rb25 lower timing cover $10
Rb25 Series 2 Camshafts $75
RB25 Cam gears in/ex $40
RB25 Water/oil cooler $50
14" electric fan $35
S13 Mud Guards $40
Deatschwerks 550cc injectors $250

Email: lookitzrich@aol.com

kcalblabel07@hotmail.com

please someone help i need these studs..

1 540 532 8465 text or call

jessbades13@aol.com

Includes RB20 lower intake runners chopped off about 4 inches from the head flange.

And an rb26 intake plenum

I may also have an rb20 intake manifold gasket, It might be damaged from storing it, i'll have to check.

$120 shipped

Maxdamilli0n@gmail.com

......You've never heard of my s13? Its the 240 that made the Kessel run in less than 12 parsec's...

I just called the few places I normally buy from and everyone's out of stock. Please let me know if you have one, it will probably need to be shipped if its not within a few hour drive of Eugene OR.

Maxdamilli0n At gmail dot com

Thanks!
-Max

I still need this, unless someone has an alternative that I will be able to run on a stock R33 ECU.

[edit] I also need the stock flywheel, 1 stock turbo, and if anyone has spares or anything, I need the hardware to hold on the coil cover. I only have 1 of I think 10 bolts.

Modified by EJ8 944 at 6:17 PM 10/28/2009

I will get pics soon

Almost new r33 gtr turbos, still grey in color from almost never being used $500 obo Maybe 150 miles on them

Oem manifolds with heat shields $100 shipped I will even port them for you if you want

Oem twin turbo pipe with compressor outlets $120 obo

Aftermarket dump tubes clearenced to fit properly $100 obo

All water and oil hard lines and banjo bolts *Make offer

Xs power 3" downpipe BRAND NEW only test fitted to my engine on the stand and fits well $150 obo has a flex pipe

Oem dump tubes *make offer

Bnib N1 oil pump $300

Bnib Crank collar $100

Oem clutch fan with clutch *make offer

oem rb26 intake cam $100 obo

Stuff I Need And Will Trade For

T4 Single Manifold, wastegates (2 38mm or one 60mm) 4 inch intake tube for twin z mafs, oil feed/return lines, 4" vband downpipe, hx40 19cm t4 exhaust housing

tt99ol@yahoo.com
E-mail me, i dont come on here much

Modified by philvia at 10:37 PM 11/2/2009

email. lznyc2007@gmail.com OR 646.591.2341
Thanks

Modified by nyc240sx at 6:28 PM 11/5/2009

1 r32 rb26 stock turbo (no shaft play) $100 plus ship
rb26 direct drop in tomei 600cc injectors(low Impedence) Paid $880 new(only 10k miles on em) $600 shipped In U.S.
stock rb26 twin turbo charge pipe $120 plus ship
stock rb26 cast turbo manifolds with heat sheilds $80 plus ship
stock rb26dett oil and water twin turbo lines $throw me an offer
stock rb26 fuel rail $50 shipped In U.S.
stock rb26 front turbo dump pipe $40 shipped in U.S.
I will list more when i tear more of my rb26 down

I do Accept Paypal
email me at hxc_nismo@yahoo.com

Modified by HxC_Nismo at 10:10 AM 11/3/2009

Modified by HxC_Nismo at 9:22 AM 11/8/2009

RB20 crankshaft w/ Jun collar installed in drop in condition $250+shipping

I'm willing to trade for a set of RB cam gears, a good oil cooler/filter relocation kit, or a lightened flywheel for a fwd SR20.

jdmser92@charter.net

Thanks,
Marshall

lookitzrich@aol.com

Shoot me an email at Hotness88 @ hotmail.com
lame email, I know. Anyways, ciao !

Chris

Comes with Commander, Apex'i Pro box (connects PFC to laptop via serial port), software and original box.

SOLD
Email is in my profile.

Modified by ninety1two40 at 7:08 AM 11/4/2009

shainemata@yahoo.com

A/C unit and lines from a s2 rb25 assembly has roughly 54k miles on it.

asking 100 shipped. email is curran907 @ yahoo

email: surfpac at gmail dot com

Never been bolted up, comes with all original hardware.

C.Ekhato@gmail.com

$110 Shipped

bolt on section dremeled off and screen removed for cone filter adaptation.

in perfect working order

$85 obo

2 -oem stock T-3 turbos both are ready for install both have minimal shaft play both have alotta life left.....170obo each shipped

1- oem crank balancing pully rb20...............40

1 oem stock wiring harness not cut RB20 .......200obo

1 oem rb20det intake manifold...... best offer

1 oem rb20det turbo manifold ...... best offer

1 oem rb20det a/c compressor with uncut lines still attached ...... 75 shipped

1 oem crossover pipe rb20 ....30 shipped

1 oem blank timing cover "does say which rb you have" rb?......35 obo shipped

1 oem hicas steering pump with brackets great shape awesome condition im running one on my car they work just fine .......rb20 .60 shipped

1 set oem block mounts aluminum..rb20 40 obo

1 oem rb25 coilpack cover 20........................shipped

1 oem turbo intake piping 30 rb20 ...............shipped

12.....270cc rb20det turbo injectors 50 a set obo shipped

Modified by preston240sx at 5:20 PM 11/8/2009

Modified by preston240sx at 5:47 PM 11/11/2009

Please e-mail me at wrgibson@fortlewis.edu with prices.

Thanks!

Please give me shipped price to 33319.

Email me if you have.

Email: surfpac at gmail dot com

Modified by HxC_Nismo at 1:56 PM 11/11/2009

Modified by HxC_Nismo at 2:24 PM 11/19/2009

Never mentioned what size they were

sorry about that there 600cc injectors

hit me up....if not satisfied shoot offer

Hanky1414@aol.com

Modified by Jo240sx at 10:07 PM 11/12/2009

Joey Harrison
Melbourne,FL

RB25 crank pulley,

440+ cc Rb25 injectors.

3'' 4 bolt downpipe, something just to get my car running so I can move it.

Fastest response -> kipp(.)zach((@))gmail.com, of course ignore brackets.

Please email me at illgarage@gmail.com ASAP!

-------------------------------------------------------
For sale, one front mount intercooler with custom piping for an rb20det or rb25det with stock intake plenum.
The piping has brackets on it so that it mounts to the car to ensure that where the pipes connect, that they won't separate under high boost.
I was running 17.5 psi through this setup.

The intercooler core is a bit over 19" wide by a bit under 9" tall by a bit over 2" thick. I was told it was an apexi core when I bought it.

$600 obo. (plus shipping)

Also for sale:
HKS GT2530 T3 flange. It has a stock rb20det waste gate actuator on it (10psi). I'll throw in the divorced wastegate dump pipe I bought for it that I had modified to clear the steering rack.

I made 309rwhp with this turbo at 17.5 psi.

$500 obo (plus shipping)

I also have brand new in the box never installed, a Forge Motorsport adjustable wastegate actuator with a number 12 spring (14-18psi).
Asking $100. (plus shipping)

Hit me up on AIM or ICQ at "Vkoslak", or email me vkoslak@yahoo.com

Modified by Vkoslak at 11:53 AM 11/22/2009

- Rb26 USED Clutch and pressure plate.. 50+ship for both

-rb25det downpipe...$20+ship

-T28 Dump Pipes with Divide ports(includes extra divider)Fits perfectly.....60+ship

- Rb26 Alternator in good working condition...$55+ship

If interested please email me at: breaker_240jz@yahoo.com
All parts are sold as is, buyer pays for ship or pick-up

Thanks
Sean
boosted95_dc2@yahoo.com