 FITMENT DATABASE - Post your wheel setup! (no pics with specs = deleted) | First < 1 2 Last |
|
| Author |
Post |
Cameron
Offline
2538 posts
a 240
Atlanta GA
6-3-2007
|
| « Re: Post your wheel setup (fuse=--action) | 7:50 PM 3/14/2008 |
|
- SSR Vienna Kreis
- 18
- 9J F 9.5J R
- +24 F +18 R
- Clears Coilovers w/ 5mm spacer Front, Doubt it will clear Z brakes, cause as it sets right now at +24 F it rubs on the Caliper...
- Suspension modifications in pics are just stock struts with Cut Springs, i Got Coilovers on there now. Will Change Pics when I take some.
- Rolled Fender Lips for it to Fit, Will Be adding a More Aggressive Roll To Rear when i Add 15mm Spacers all round.
- 215/45/18 All round
- Soon Spacing will have +15 added all round for +9 F +3 R. 
 
|
Blacky Chan
Offline
33 posts
93 pug hatch
Oklahoma City Oklahoma
4-1-2007
|
| « Re: Post your wheel setup (ZenkiCam) | 3:06 PM 3/18/2008 |
|
sportmax 002's
16x8 +/- 0
nexxan 205/50/16's
kts coilovers (clears them)
courtesy nissan rucas
wickid tunning tension rods
roll on front and back but it really doesnt matter
|
Touge noob S13
Offline
275 posts
1991 240SX coupe
Sun City CA
9-3-2007
|
| « Re: Post your wheel setup (yokota180sx) | 4:34 PM 3/26/2008 |
|
- Wheel Brand: Autobahn
- Diameter: 15
- Width: 7
- Offsets: +10
- Like most old school meshies, they will not clear Z brakes unless you used spacers
- Suspension modifications: Eibach Sportlines with Tokico blues
- No fender modifications
- 205/55/15-Front
205/60/15-Rear
 Techno addict "240s r for drifting not racing! " 
|
ashibah83
Offline
1108 posts
93 SUPA BLACK COUPE
St. Marys pretty much Jax, Fla Ga
10-14-2006
|
| « Re: Post your wheel setup (yokota180sx) | 9:31 AM 4/23/2008 |
|
- Wheel Brand: Rota d2
- Diameter: 17
- Width: 8.5
- Offsets: +20
- not sure about Z brakes, although it lookslike the willclear with ease
- Suspension modifications: Stance GR+ coilovers, Full Battle Version
Arms
- No fender modifications, but if i wanna go lower i may need a roll
- 215/45/17-Front and Rear
| Quote, originally posted by ppctx » | | Talking to a non car enthusiast friend yesterday. He said "I bet you feel like a bad a** driving around in the car", I said no, I play little games like “what’s that noise” and worry about what's going to break next. |
|
sviellvoicae
Offline
500 posts
1992 sil-40
reno nv
3-2-2007
|
| « Re: Post your wheel setup (ZenkiCam) | 6:11 PM 5/2/2008 |
|
17" 5zigen typhoons +43  all around with 50mm spacers. Tires are Falken Azenis 225.45.17
all pics are the same car. The silvia front with chargspeed kit is how i bought it, so i sold all that and i am now changing to what i want. here is the begining to what i am doing just ordered these
http://cgi.ebay.com/ebaymotors...7.m32 http://www.origin-lab.com/inde...l=180 and the 30mm
http://www.origin-lab.com/inde...b=180 will post when all is done 
Always the real thing, always 240sx. Qudos to you for holding the course. You must have a tremendous amount of patience and fortitude, along with deep pockets to stay the course. While there are things I might do differently, I commend you on your vision and passion. At the end of the day it will be uniquely your project and dream come to reality. That is a dream we chase in our own ways but rarely fulfil. For all those talk about what they're going to but have one excuse or another, you keep on track. As far the money goes, you could spend 50k on a new car, but it would only be one amongst many of the same. Your project will yield a truly custom car like no other. Keep going!
WHY HATE? 
|
kornaz
Offline
2221 posts
95 240sx SE, 06 Gixxer 750.
LA CA
11-10-2005
|
| « Re: Post your wheel setup (sviellvoicae) | 12:13 AM 5/7/2008 |
|
- SSR Professor SP1
- 18
- 10" all around
- + 16 F with 8mm spacer (will be +9 soon), +24 R with no spacers (will be ? soon).
- Dunno bout the Z brakes, but with spacers up front clears Q45 brakes with some room. Front doesn't clear coilovers without spacers. Running 8mm right now, need 10mm to have about 2.5 - 3 mm clearance. Rears clear.
- Megan track coilovers, running max front camber, dunno rear. Camber not adjusted, but when i go 15mm up front, i'll rpolly be 1.5 - 2 neg camber front, and prolly same on rear with spacers, or mad pull.
- All fenders rolled. Rear's pulled like 2 - 3 mm.
- 225/40 all around.
The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so f***ing temperamental.
|
alex4
Offline
88 posts
89 coupe, 87 supra
North Alabama
7-9-2007
|
| « Re: Post your wheel setup (yokota180sx) | 5:47 PM 5/25/2008 |
|
- Motegi Traklite Anthracite with Machined Lip
- 15x6.5
- +35 offset
- No way in hell it clears Z brakes. It's a 15 inch wheel.
- No suspension mods, but I think they will look even better with a little drop.
- Tires: 195/60R15 Cooper Lifeliner
89 Coupe 5 spd
KYB Shocks, Complete Energy Suspension Bushings, K&N Filter, Circuit Sports Shift Knob
~~Also have a 87 Supra...the beast...
|
FlatBlackIan
Articles Managing Lumberjack
Offline
7547 posts
S13 Chuki, S13 Zenki, A34 Maxima, 1983 C10 pickup.
Creepy cabin in the woods MN
12-23-2004
|
| « Re: Post your wheel setup (kornaz) | 8:48 AM 6/11/2008 |
|
Rota Grid Offroads
Diameter: 16"
Width: 8"
Offset: +10 front and rear
Does NOT clear Z brakes. Clears coils fine.
All control arms are stock.
Fender roll required front and rear for my tire size.
225 50 16 Falcon Azenis RT-615s front and rear.My camber settings as pictured are -2.6 degrees on each front wheel, and -2.5 degrees on each rear wheel. The fenders will need pulling if you want to run less camber. Im thinking about adding some 10 mm spacers to the rear to push them out slightly further. 
/edited, better pictures added/
Modified by FlatBlackIan at 12:41 AM 7/6/2008
 >>The FlatBlack Rally Blog<<
|
adrians_s13
Moderator
Offline
18449 posts
driving a swapped 240 is worse than drug traffic
Long Beach CA
6-29-2005
|
If you're wondering why your post was deleted, it was because you didn't follow directions. Read the first post for directions.And thanks for those that did follow directions. 
|
slik_s13
Offline
378 posts
1990 nissan 240sx hatch back
espanola new mexico
3-23-2006
|
| « Re: (adrians_s13) | 1:02 PM 6/11/2008 |
|
- Wheel Brand- gramlights 57 maximum flat black
- Diameter- 17
- Width- 9
- Offsets- +12
- Does it clear z brakes and coilovers- i dont have z brakes, so dont know.
i do have kts coilovers and it clears them just fine.
- Suspension modifications- i went as low as i could get the coilovers togo with out giving it a really rough ride, still pretty rough but not rough enough for me. what i did was take out two collars from the coilovers. running stock sus arms for now adjusted them as much as possible so that way im not runnin so much camber, a big difference that made  really need to get the arms ASAP.
-What fender modifications- i did a slight roll in the front and the back was a little more of a roll. also folded the the inner seem in the front fender wells that the tires always rubb on(right by the coilover). tucked my harness so theres no rubbage there
- Tire Sizes- 215/40 all around
- Any other relevant info. none
on to the pics
still need to paint it
cant really see the wjeel to well in this one.
FS: electric sun roof for s13 coupe
sr20det a/c compressor
|
danielsan
Offline
349 posts
1991 240sx coupe SE
lawrence ks
4-8-2008
|
| « Re: (adrians_s13) | 10:16 PM 6/23/2008 |
|
- Datsun 280z turbo wheels
- Diameter - 15"
- Width - 6"
- Offsets - +10mm
- stock suspension
- running 195/60/15
Modified by danielsan at 9:28 PM 7/2/2008
|
-RJ-
Offline
1807 posts
S13 Convertible
757 area VA
8-9-2006
|
-Z32 OEM non-turbo rims painted gold
-225/50/16
-+45 Offset
-Not sure about the Z32 brakes, but I am pretty they will fit. (I hope so because i plan on putting them on)
-Megan Street Coilovers
-The front wheels rubbed on the coilovers so i got 30mm spacers and they clear fine, the fenders just need to be rolled
HEY READ THIS
z32 calipers for sale 250 shipped and a Piggy lip 
http://forums.nicoclub.com/zer...-iron
http://forums.nicoclub.com/zer...pping
|
drifter92
Offline
157 posts
1995 Nissan 240sx KA24DE
Victoria Texas
2-11-2008
|
- Sportmax 962's
- 18"
- 8.5"F 9.5"R
- +42 F +35R
- All clear
- Stock old suspension
- Stock fenders but i need to roll the back for hard bumps
- 225/40/18 Front 245/40/18 Rear
- No spacers
1995 240sx Daily Drifter/Project - KA24DE
|
jibe
Offline
14 posts
RS13
Paris
4-18-2007
|
| « Re: (drifter92) | 10:37 PM 8/27/2008 |
|
ZG flares
Sportmax 002 15X8 ET0 F and R
5mm spacers on front (no front spacer on pics)
35mm spacers at the rears
205/55/15 F
225/50/15 R
|
smurf13
Offline
503 posts
1992 240sx "fatback"
mauldin sc
6-9-2007
|
| « Re: Post your wheel setup (yokota180sx) | 5:06 PM 10/6/2008 |
|
elite
17 F&R
9j F&R
+15 F&R
clears coilovers
megan street coilovers and RUCA's
225/45's F&R
rolled fenders3.5 degrees of camber with 0 toe F&R 
|
SeVeN
Offline
71 posts
Nissan 200SX RS13 (180SX)
Gutersloh, Germany
9-20-2006
|
| « Re: Post your wheel setup (smurf13) | 10:17 AM 10/10/2008 |
|
- Borbet T
- 17 x 8
- ET 35
- No spacers
- h&r springs (35mm lower)
- 225/45 r17
Nissan 200sx rs13 ca18det gt2871r
|
92SR20S13
Offline
368 posts
sr20det-s13
calgary alberta
3-13-2007
|
| « Re: Post your wheel setup (SeVeN) | 1:10 PM 11/16/2008 |
|
- Vesta Eins Kahn.5
- 18"
- 8"Fronts 9"Rears
- +35 Fronts +38 Rears
-215/35R18 Fronts 245/40r18 Rears
- Gab struts with RSR springs
-Dont have Z brakes on yet but will install coilovers and brakes with 25MM spacer up front and 15MM in the rear.
|
mrdicks95se
Offline
13 posts
RPV CA
11-23-2008
|
| « Re: Post your wheel setup (yokota180sx) | 1:47 PM 11/23/2008 |
|
Work Euroline DH
18x8 +36 (7mm spacer = +23 effective)
18x9 +38 (25mm spacer = +13 effective)
225/40-18 front and rear
Tokico Illumina/GC, oe spec camber and toe
Rear fender roll
Not sure on z32 caliper clearance
|
mrdicks95se
Offline
13 posts
RPV CA
11-23-2008
|
| « Re: Post your wheel setup (yokota180sx) | 1:59 PM 11/23/2008 |
|
Tenzo Type M
19x8.5 +17
19x10 +22
215/35-19 front
245/35-19 rear
Illumina/GC, oe spec camber/toe
Rear fender roll req'd
Clears z32 and any other caliper. i'm currently running z32 calipers with 13.1" cobra rotors. 
|
esahuque
Offline
316 posts
95 240sx KA-T, 00 frontier
Metairie La
10-9-2004
|
| « Re: Post your wheel setup (yokota180sx) | 12:18 PM 1/8/2009 |
|
- Motegi Touge
- Diameter-17"
- Width-9"
- offset-+24 all the way around (5mm spacers makes +19)
- clears coil overs, N\A on Z breaks
- Coilovers, RUCA's, rear toe arms, front camber plates
- rolled F\R slight pull in rear
- 225/45/17
Modified by esahuque at 8:27 AM 2/28/2009
|
SketchyRollin564
Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: Post your wheel setup (esahuque) | 10:38 PM 3/14/2009 |
|
-z32 TT wheels on s14
-Rears: 245/50/16 on 8.5" wide wheel, not sure on offset, i think its +35
-Fronts: 225/50/16 on 7.5" wide wheel, +45 offset
-Front tires rub the strut a tiny bit, but i just used these little washers as spacers, and its fine now, so 5mm spacer will easyly fix problem
-Stock struts, Tein lowering springs
-Not sure on clearing Z brakes without spacer
|
esahuque
Offline
316 posts
95 240sx KA-T, 00 frontier
Metairie La
10-9-2004
|
| « Re: Post your wheel setup (yokota180sx) | 8:33 AM 3/15/2009 |
|
::: update from previous post :::- Motegi Touge
- Diameter-17"
- Width-9"
- offset-+24 all the way around
(15mm spacers up front makes +9)
(20mm spacers on rear makes +4)
- clears coil overs, N\A on Z breaks
- Coilovers, RUCA's, rear toe arms, front camber plates
- rolled F\R hard pull in rear
- 225/45/17 
|
pandapants
Offline
1367 posts
89 DragonWagon
Gainesville/Orlando Fl
3-17-2008
|
- Brand: Sportmax/xxr 962
- Diameter: 17"
- Width: 9"
- Offset: +35 (25mm spacers front and back, so +10 respectively)
- Don't have Z brakes so don't know
- PBM coilovers, rucas, tension rods and tie rods
- All fenders rolled ONLY
- 215/45/17 eco/wallet friendly Primewells all around camber:
-2 deg. front
-5 deg. back toe: ?
caster:?
 
| Quote, originally posted by yokota180sx » |
Max **** is top notch. |
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: Post your wheel setup (yokota180sx) | 7:00 PM 4/7/2009 |
|
- 5Zigen Typhoons
- 17"
- 8" Front / 9" Rear
- +27 Front / +35 Rear
- Clears Z Brakes (No Idea on Coils, but most likely. There is plenty of room!)
- Eibach Springs on Tokico Struts
- Slight Fender roll, but did not have to do with these wheels
- 225/45/17 Front / 275/40/17 Rear- The front tires are way too skinny. I'll be trying a set of 245/40/17 (the ones that came off of the rear wheels when I put on the 275's). All the pics are with the 245's on the rear except the last 2. I just got the 275's on today! 
The 275's! Much better than the stretched look in my opinion...
Modified by ElNegro at 7:51 PM 4/8/2009
92 White 240SX Coupe: 11.95 @ 114.03 MPH; 1.613 60 Foot (342.5 WHP / 334.6 WTQ); GT3071R and then some in the works...
92 White 240SX Vert: My Newest S13; Fun in the Sun!!!
91 Black Sentra SE-R: Auto-X Project
89 Black 240SX Coupe: The Quickest T25 I ever drove (Sold  )
93 Red 240SX Coupe: My First S13 (Sold ) Jefferson State Motorsports: Local Nor-Cal and Southern Oregon Automotive Forum
|
Spider
Offline
21 posts
92 240SX Convertible
Miami FL
10-26-2008
|
| « Re: Post your wheel setup (yokota180sx) | 6:06 PM 4/19/2009 |
|
- Drag DR-20
- Diameter: 15
- Width: 7
- Offsets: 0
- Does NOT clear Z brakes.
- Suspension: stock
- No fender mods.
- Tire Size: 205/60/15
|
w8lifter21
Offline
115 posts
'91 300zx TT, '04 G35 Sedan
Vernon Hills/Chicago IL
12-17-2007
|
| « Re: Post your wheel setup (Spider) | 10:45 AM 4/23/2009 |
|
MSR 088
19x8 +25 offset 245/35/19
19x10 +40 offset 285/30/19
Stock suspension, no rub. Yes I know I need to lower it a bit, sorry for the crappy phone pic, will try and get better ones up soon 
|
vr446
Offline
7 posts
S13
New Rochelle NY
4-24-2009
|
| « Re: Post your wheel setup (w8lifter21) | 9:05 PM 4/25/2009 |
|
Probably been done, but here's my contribution..sorry not that aggressive
F: 17x8 +25mm (235/45/17)
R: 17x9 +35mm (255/40/17)
Zeal Coilovers, ENDLESS 6-POT front and Z32 Calipers rear
Front no spacer, Rear 10mm HR spacer
Rolled and pulled rears only, front fits no prob, but if car sits too low it will rub fender liner and wire harness on drvr side
|
iseenem240SX
I weigh 240 and drive one
Offline
191 posts
1998 240SX SE
Los Angeles/Ventura County CA
8-23-2005
|
| « Re: Post your wheel setup (w8lifter21) | 6:56 PM 4/27/2009 |
|
OEM 350Z Touring V.1
- 18" diameter
- 8" wide Front/Rear
- +30 mm offset Front/Rear
- No idea on Z brakes, looks like there's lots of room for them though.
- KYB GR2's and stock springs. (Coilovers soon).
- No roll.
- 225/45/18 Front and 245/45/18 Rear
Modified by iseenem240SX at 8:15 PM 4/27/2009
|
Skilz10179
Offline
97 posts
98 240SX
Westland Mi
8-30-2008
|
| « Re: Post your wheel setup (iseenem240SX) | 1:17 PM 4/29/2009 |
|
- Rota P45R
- Front - 17x9 +25 245/40/17
- Rear - 17x9.5 +30 275/40/17
- Offsets
- Stock brakes for now
- Stance GR+Pro Coilovers
- Fenders rolled
http://www.cardomain.com/id/skilz10179 <--- My Cars!
|
matzinm2
Offline
80 posts
1997 Nissan Altima GXE, 1989 S13 Hatchback
Bellingham WA
2-19-2008
|
| « Re: Post your wheel setup (Skilz10179) | 3:02 PM 6/8/2009 |
|
Does anyone have ROTA RB's on their hatch? I'd like to see that... thinkin bout em.
 
|
drifter92
Offline
157 posts
1995 Nissan 240sx KA24DE
Victoria Texas
2-11-2008
|
Stock Zenki Base Wheels
Front - 15"x6.5" +42 195/60/15
Rear - 15"x6.5" +42 195/60/15
1" Spacers All Around
Stock Brake Size
Godspeed Coilovers
Rolled Fenders, Slight Pull In Rear(Not Necessary)
|
truckskinjoe
Offline
71 posts
91 240SX RB26DETT AWD swap
Traverse City MI
8-8-2008
|
| « Re: Post your wheel setup | 7:27 PM 6/30/2009 |
|
Here are a few pics of our 90 S13 with an RB 26 DETT AWD swap, tires are Michelins P285 x 35, 18s on Rota P45 Rs 9.5" with +20 offset. No lowering yet, stock suspension / well sort of anyway, it has the S13 struts, but a 350 rear assembly and the Skyline front hubs and knuckles. Anyway here are the pics. Oh yes I drive it daily. race some on weekends.
|
drifter92
Offline
157 posts
1995 Nissan 240sx KA24DE
Victoria Texas
2-11-2008
|
Nippon F1 Wheels
Front - 17"x7" +40 225/45/17
Rear - 17"x7" +40 225/45/17
1" Spacers all around
Stock Brake Size
Godspeed Coilovers(Don't go low enough)
Rolled Fenders, Slight Pull In rear(Not necessary for these wheels)
|
| First < 1 2 Last |
