yokota180sx
"Fun Sponge"
Offline
3099 posts
1996 Y33 cedric/1997 Stagea
Akiruno shi tokyo
11-19-2006
|
| « Re: Post your wheel setup (yokota180sx) | 2:53 PM 7/17/2007 |
|
 1. Weds Farmas
2.17
3.8
4.+8 With 20mm spacers front and rear
5.No on both accounts unless you have spacers
6.Coilovers, rear upper control arms
7.Both front and rear fenders rolled and pulled
8.225/45/17 (if i remember right)
Modified by yokota180sx at 8:13 AM 7/18/2007
|
srpowered240sx
Shocker Style
Offline
12547 posts
90 240sx-sr, 92 F-150, 96 integra gsr
humboldt county ca
6-29-2005
|
| « Re: Post your wheel setup (yokota180sx) | 3:47 PM 7/17/2007 |
|
good thread yokota180sx. nothing special, heres....
1. sportmax 504's
2. 18x8
3. +32 up front, +27 in back(5mm spacers)
4. dont know about z32s, but ill know soon.
5. coilovers, toe control, rr adj upper control arm
6. no tire rub, no fender contact
7. 215-35-18 
 
When did I realize I was God? Well, I was praying and suddenly realized I was talking to myself.
NICO photo contest crew..........three, count em, three times
Proud Creator of WBDM2TTWFOC: Cuz selling is for pussies!!
|
AmoebAssassin
Offline
2498 posts
1991 Base fastback 5spd, black
Pittsburgh PA
11-17-2004
|
Awesome idea Grant, this thread is so f-ing stickied.
 1991 Black 240sx Fastback 5spd - Blacktop S13 SR20DET - GTiR T28 @ 10psi
|
MicroMNky
Offline
21 posts
'96 240SX
Eden Prairie mn
3-27-2007
|
| « Re: Post your wheel setup (yokota180sx) | 6:23 PM 7/18/2007 |
|
- JIC Magic J-Force 5
- 17 inch
- 9 (front and Back)
- +15 (front and Back)
- Clears my STANCE GR+ Pros.
- RUCA's.
- Slight rollage on the rear. Fronts could use a slight roll if I decide to go lower...which I will.
- 225/45's 
|
cmfireman
I'm Flying!
Offline
3028 posts
96' S14 SE
Bostic NC
6-11-2006
|
| « Re: Post your wheel setup (MicroMNky) | 6:53 PM 7/19/2007 |
|
- Racing Hart C5
- 18"
- 7.5" (all 4)
- +35 (all 4)
- All Stock Suspension
- 225/40/18
Basically just showing that +35 on an S chassis doesn't cut it. 
 SHIFT_slow
|
KoukiRydr
Offline
185 posts
s14a
Tracy
9-5-2005
|
| « Re: (babowc) | 9:51 PM 7/19/2007 |
|
•Grenade GX-01s
•17 front and rear
•9J front and rear
• + 15 all around
• Clears Nismo G-attack/R-tune coilovers
• no other suspension yet
•highly recommend to have rear fenders rolled, as i can not got lower on them
• 235/45/17 all aroundSorry for crappy pictures, will get some during daytime
-Marcus
Why are Americans so lazy?
 1998 240sx SE 5spd AIM ScreenName = KoukiRydr
|
Dano
Super WizMod of OZ
Offline
14599 posts
'05 Nismo Frontier CC / '95 240sx base
Kansas City but miss Phoenix
10-29-2002
|
- 5Zigen FN01s
- 17
- 8
- +35
- Clears Z brakes, won't clear strut with 245/45 tire without a 5mm spacer, i'm using a 6mm
- KYB AGX/ Sprint Springs, Cusco RUCAs, Camber -1.7fr, -0.5rr
- front roll and very slight pull
- 245/45 all around
-Dan
National Association of Storm Chasers And Spotters MEMBER -- AIM: s14sx2nr
Love you Stace! Enjoy your wings!<3<3<3
|
adrians_s13
Moderator
Offline
18452 posts
driving a swapped 240 is worse than drug traffic
Long Beach CA
6-29-2005
|
| « Re: Post your wheel setup (yokota180sx) | 7:54 PM 7/20/2007 |
|
- SSR SP1 Professors (the old school ones before they were bought off by Tanabe)
- 17"
- 8/9 (f/r)
- +24 (w/ 10mm spacers, making them actually +14)
- have no clue on z brakes
- hks hypermax coilovers
- fender roll on all 4 fenders (no pull needed)
- 215/45 ; 225/45 (f;r) 
|
adrians_s13
Moderator
Offline
18452 posts
driving a swapped 240 is worse than drug traffic
Long Beach CA
6-29-2005
|
| « Re: Post your wheel setup (adrians_s13) | 7:58 PM 7/20/2007 |
|
- Enkei #92
- 15"
- 7
- +0
- will not clear z brakes
- 205/55  
|
ArticDragon192
Offline
1916 posts
91 Z32 2+2
West Covina/ Irvine CA
9-10-2004
|
K, I'll be the first flush Z32 here, lol.Front only for these, rears stick out like mad, so not showing pics of that. First up:
MB Motoring Weapons
18*9 +15
235/40-18
Around 2° of camber
Roll necessary
Lowered on Tanabe GF201 springs
Clears suspension
Clears brakes 
I run lower than most 240s dare go, lol.
|
ArticDragon192
Offline
1916 posts
91 Z32 2+2
West Covina/ Irvine CA
9-10-2004
|
Next up:
Uras NS-01s
17*9.5 +15
255/40-17 Azenis
Lowered on Stance coilovers
Clears coilovers
Clears calipers
-3° camber
0.0 toe
10.5 caster with adjustable Tension Rods
Render roll and slight pull necessary
|
audtatious
Nom Nom Nom
Offline
25593 posts
2008 G37s Coupe - 2007 G35s Sedan
Jeff/Louisville
10-27-2002
|
| « Re: Post your wheel setup (eds13) | 2:04 PM 7/22/2007 |
|
5th Gen Maxima (2k2)- Infiniti G35
- 18"
- 8"
- +30mm
- Needs slight roll of passenger rear lip
- 245-40-18
- Eibach Pro kit w/Illumina's
  
|
Clawhammer
Sir Rocksalot
Offline
2939 posts
RPS13
Gainesville/Clearwater FL
12-29-2006
|
| « Re: Post your wheel setup (yokota180sx) | 1:20 AM 7/25/2007 |
|
I guess for the S13 guys?1. Nissan 
2. 16
3. 6.5
4. 40mm
5. Clears coilovers and zbrakes
6. Stance GR+ pro's, SPL camber/toe/tension rods (not required)
7. No fender mods
8. 205/50/16 
|
austins240
Offline
410 posts
93 240SX HB, 89 Rolla GTS
Martinsburg WV
9-3-2003
|
| « Re: Post your wheel setup (yokota180sx) | 6:53 AM 8/6/2007 |
|
- CST D-Spec
- 17
- 9.5
- +15
- easily clears Z brakes
- K-sport coilovers, barely clear in front.
- front/rear roll + (pull reccomended or widebody)
- F: 235/40 R: 235/45I have RUCA with aprox -2.5* (need adjusted now fenders are F!*@ed) and front is approx -1.5*, also needing adjusting.
Modified by austins240 at 4:28 AM 8/7/2007
Modified by austins240 at 4:29 AM 8/7/2007
|
Soravia
Offline
3193 posts
1991 240SX Coupe 1992 240SX SE Coupe 2003 SE-R Spec V
Jacksonville FL
11-18-2005
|
89-90 240sx stock 15x6 wheels
Eibach Pro 1" Drop with KYB GR-2
205/50/15 tires
Plenty of fender gap.
1991 240SX Coupe all stock - Wrecked.
1991 240SX Coupe VQ30DE project - Sold.
1991 240SX Coupe Celica front seats - Sold.
2003 SE-R Spec V - Sold.
2004 RX8 Sport - Sold.
Next pick - 240SX? RX-8? RS200? Impreza RS???
|
jspec603
Offline
1042 posts
92 verrrrrrrrrrrrrrrrrrrrrrrrrrrrrrt
manchester nh
10-24-2006
|
| « Re: (austins240) | 6:29 PM 8/16/2007 |
|
1. Falken Hanabi's
2. 17
3. 9
4.+20 no spacers
5. sold the car before I put the calipers on
6. Tein SD
7. Rear fenders rolled
8. 235/40/17 
myspace.com/SlidewayzS13
Check out Project Jspec603 Vert build, but only if your cool enough...  
FUJIISPL.COM
|
slyedog240sx
Chuki For Lyfe
Offline
1253 posts
93 240sx se coupe, 05 grand cherokee HEMI Power
shallow grave wife says i just dig deeper
2-14-2007
|
| « Re: Post your wheel setup (yokota180sx) | 7:12 PM 8/16/2007 |
|
asa jh2 18x7.5 45mm offset kyb gr2 with tein s tech 215/35/18 all 4. When due for tires will change rear to a 225/40/18 .   
  
rear main seal writeup
Ooh the good ol days
seatbelt warranty manual
|
Broadfield
NICO Electronics Sponsor
Offline
2029 posts
1992 240sx
Normal IL
9-5-2006
|
| « Re: Post your wheel setup (yokota180sx) | 7:43 PM 8/16/2007 |
|
5 Lug Conversion
Stoptech 13" Brakes Front (Only 18's or bigger will clear these)
Z32 Brakes Rear
WedsSports TC-005's
18x8.5 +32 245/40
18x10 +44 275/35
Cusco Coilovers
Rolled Quarters
Toby Broadfield
JL Audio Spks ----- Alpine HU's <----On Sale Items
Viper Alarm Systems-----Remote Starters
Alpine & JL Audio Amplifiers ----- Alpine Portable Navigation
FIBERGLASS HOW TO!!
All sales or technical inquiries: Toby.Broadfield@comcast.net
309-261-4827 Please leave message if no answer!
Paypal ID: Toby.Broadfield@comcast.net
--Pics of my car through various stages-- S13 PICS 
|
kirk
Offline
83 posts
1993 240sx
Moore ok
7-8-2005
|
| « Re: Post your wheel setup | 10:04 AM 8/26/2007 |
|
SportMax 501's 16x8+15 front and rear
Falken FK452 205/50r16 front and rear
Stance Basic coilovers (clears them by a mile)
SPL RUCA's
Stock fenders (no mods at all... need a roll to go lower safely)
Front -2.3° camber, 5° caster, 0 toe
Rear -2.0° camber, 0 toe
|
eds13
Special Ed
Offline
5544 posts
We are the all singing all dancing crap of the World
11-1-2004
|
| « Re: Post your wheel setup (yokota180sx) | 10:21 AM 9/2/2007 |
|
- Work Vs
- 18
- 9 up front, 10 out back
- +5 up front (8mm spacer being used) and +13 rear
- needs 8mm spacer to clear z brakes, clears coils fine
- kei office coils in the front, tein HA in the rear. No other suspension arms!
- roll and pull front and rear, decent in the front. and i need to pull the rear some more
- 215/40/18 and 235/40/18
   
|
RB_Seth
Offline
117 posts
92 240sx RB25, 91 240sx coupe, 91 240sx SR20, 95 240sx...
North Huntingdon PA
1-7-2007
|
| « Re: Post your wheel setup (yokota180sx) | 4:57 PM 9/8/2007 |
|
5Zigen FNO1R-C
18x8.5 +30 front
18x9.5 +35 rear
clears all Z brakes easily
Stance coilovers, rear suspension arms to correct allignment
will need to roll fenders to go lower
225/40R18 front 255/35R18
 more pics here http://www.cardomain.com/ride/2622869/1
|
sr20power
Offline
1688 posts
S14 Zenki
southern cali
1-16-2003
|
| « Re: Post your wheel setup (yokota180sx) | 8:26 PM 9/9/2007 |
|
5Zigens FN01R-C
17x8 +25 front
17x9 +35 rear
Don't know about Z brakes
Tein HE coilovers, Cusco Rear Upper Arms, -1 degree camber all around
No roll or fender modication unless you go lower
225/45 all around
|
sr20power
Offline
1688 posts
S14 Zenki
southern cali
1-16-2003
|
| « Re: Post your wheel setup (yokota180sx) | 8:07 PM 9/11/2007 |
|
Works XD-9
17x9.5 +17 all around
Don't know about Z brakes
Tein HE coilovers, Cusco Rear Upper Arms, -1 degree camber all around
Rear's have been rolled...will lower eventually
215/40 all around
|
SWAT Team S14
Offline
30 posts
Allentown NJ
8-14-2007
|
| « Re: Post your wheel setup (sr20power) | 6:00 AM 9/20/2007 |
|
sr20power has the exact same setup as me, so save from being redundent i thought i'd add a car i saw on another site......the body work on this car may leave something to be desired, but this is a wheel thread, right? for s14 owners, this car is the epitomy of tire stretched, big lip, low offsest wheels  
wheels: work vs-kf
size:
F- 18x9.5 +7(effectively +0 with 7mm spacer to clear caliper).
R- 18x10 +7 tires:
F- 225/40/18 Federal ss595
R- 235/40/18 Federal ss595 stock fenders, with a a roll/pull in the rear...
|
phanatikz32
la última nuez de suspensión
Offline
1859 posts
1991 NA to TT z32 biatch!
Fontana CA
11-5-2006
|
| « Re: Post your wheel setup (SWAT Team S14) | 7:38 PM 10/2/2007 |
|
- Sportmax 006's
- 18x8.5 front 18x9.5 rear
- +35
- clears z brakes i own a z
- suspension is 100% stock hoping to change that before january 
- no fender mods
- 275/35ZR 18 (REAR) 245/40ZR 18 (FRONT) 
 -------->
| Quote, originally posted by Ace2cool » |
Lower it (to the point you can't go to the mall cuz there's speed bumps)
|
|
WidebodyZ
Offline
663 posts
X300 LWB Vanden Plas / W203 C240 Luxury Sedan
Honolulu/Tokyo HI
6-8-2006
|
| « Re: Post your wheel setup (yokota180sx) | 3:27 AM 10/3/2007 |
|
1991 300ZX 2+2 TT
Post the following information in this format, using a / to seperate Front / Rear.
* F / R
* WORK VSKF / WORK VSKF
*18" / 18"
* 9" / 10.5"
* -3 / -19
* Would not clear stock front calipers..I had 2mm of clearance with 6 piston AP's...rears clear all through the millennium - suspension clearance no problem.
* Coilovers, all adjustable arms.
* Front fenders are Final Konnexion wide/vented, rears are 75mm TetzuAero over fenders.
* Falken RT615 225/40/18 / Falken RT615 245/40/18
* I would hvae loved to go lower, but speed bumps at my housing complex limited me. Camber easily correctable with the arms.
Japan VIP & Automotive Lifestyle...
|
SLde_Show_Enthusiast
Offline
137 posts
95 240sx
new orleans la
1-3-2004
|
| « Re: Post your wheel setup (yokota180sx) | 8:56 AM 10/8/2007 |
|
here's daytime pics of my daily:
american dream!
 
wheel specs:
F- 18x9.5 +7
R- 18x10 +7
Tires:
F- 225/40/18
R- 235/40/18 alignment:
F- -3 camber, +7.5 caster, 0 toe
R- -3 camber, dont know the rest because of stock rear arms(didnt feel like swapping those over from the track car). heres some more on the track car when it was in commission... :-/ 
Alignment:
F- -3 camber, +8 caster, 0 toe
R- -2 camber, stock caster and toe(aftermarket toe rods).
  
duh mah! wheels and suspension!
|
Dr. Moreau
Offline
2 posts
1990 Nissan 240SX SE
La Place, LA, USA LA
2-2-2004
|
| « Re: Post your wheel setup (yokota180sx) | 11:17 AM 10/8/2007 |
|
plz. excuse the lack of good paint. i'm poor.
 wheel specs:
Work Emotion XT7
F- 18x9.5 +12
R- 18x9.5 +12 Tires:
F- 225/40/18
R- 235/40/18 kts coilovers, spl t/c rods alignment:
F- -3 camber, +8.6 caster, 0 toe
R- -5L/-4R camber, 0 toe
|
ddgsxr504
Thread Jacker
Offline
6000 posts
1995 Nissan 240SX SE 2009 Nissan Altima SL
Oceanside CA
1-8-2005
|
| « Re: Post your wheel setup (Dr. Moreau) | 9:51 AM 10/27/2007 |
|
 Baller @ss 5Zigen FN01RC's
17x9 Front 17x10 Rear
+15 / +12 Respectively
Plenty of room for Z brakes, hell any big brake kit that will fit up to 17"
Clears coilovers with no problems as well
Front fenders untouched
Rear fenders require roll and pull but I suck at that For the record I was kidding about the FN's being baller but For $350 with tires I'm not complaining.
|
yokota180sx
"Fun Sponge"
Offline
3099 posts
1996 Y33 cedric/1997 Stagea
Akiruno shi tokyo
11-19-2006
|
| « Re: Post your wheel setup (ddgsxr504) | 3:32 PM 10/27/2007 |
|
1997 Nissan Cedric (Q45 resolves same fitment for y33)Leon Hardiritt Orden
19x9 -25 (-5 with 20m spacer)
s13 coilovers and LCA with maxed out camber plates
225/35/19 19x10 -6 (i think)
S13 rear coilovers
RUCAs that are almost maxed out for camber
toe rods
rear and front were both pulled and rolled. 
|
S13Teddy
HAI KITTEH
Offline
4742 posts
of useless, uninformative garbage
Torrance CA
4-30-2007
|
| « Re: Post your wheel setup (yokota180sx) | 7:52 PM 11/19/2007 |
|
1989 Nissan 240sx Coupe
Sportmax 501
16X8 +15 front and rear
Megan Track Series Coilovers w/ camberplates
No other suspension mods
Dunlop Direzza 195/50/16
Front and rear fenders are both rolled
Clears coilovers fine, no rubbing either
Don't know if it will clear Z brakes 
    
 Team Mulsanne
Teddy's Blog
D-MAX USA Website
|
skydragoness
OG Chic
Offline
8372 posts
1992 240sx 1999 Impreza Wagon
A dismal, horrible place called Delaware
7-24-2002
|
| « Re: Post your wheel setup (S13Teddy) | 10:24 PM 12/1/2007 |
|
SSR Integral A2 (uber rare, good luck finding 'em  )--16x7+32 front
--16x8+38 rear
--Spoke design is huge, clears Z32 26mm calipers w/ plenty of room. 30mm should also be fine.
--225/50/16 all around w/ KYB AGX+Suspension Technique springs.
--No rubbing/touching.
--Tires shown: Yokohama ADVAN S4
|
ArticDragon192
Offline
1916 posts
91 Z32 2+2
West Covina/ Irvine CA
9-10-2004
|
- Volks Racing
- Diameter : 17s
- Width : 10J
- Offset : +15
- Clears coilovers and brakes
- tensions rods, toe rods in the rear
- fenders are rolled and have a newspaper pull all around
- 245/40-17 all around
- Alignment:
Camber : -3° all around
Toe : 0 toe all around
Caster : 10.5 (Needed to clear AICV in rear of fenderwell)
- NO rubbing at allPics:
|
inqui-Z-tor
Offline
50 posts
84Z31, 05A08
Sacramento CA
1-24-2007
|
| « Re: Post your wheel setup (yokota180sx) | 7:17 PM 1/1/2008 |
|
Nice idea for a thread .. but it really should be organized by car/model.Here is my contribution .. for 84-89 Nissan (300ZX) Z31 ONLY http://wheelshow.redz31.com/
|
usdm_180sx
Offline
738 posts
1993 base model 240sx (s13)
Behind you at full opposite lock
12-21-2003
|
| « Re: Post your wheel setup (inqui-Z-tor) | 8:08 PM 1/1/2008 |
|
No way I can't believe I missed this!- Work Equip
- 17
- 9 and 10
- +16 and +18
- High disk, clears z brakes and coilovers
- Tein Flex, SPL t/c rods (front) SPL RUCAs and Toe links (rear)
- fender modifications? Rolled and mild pull in rear (5mm)
- 215/45 and 235/40
- Custom made by RB Motoring 
Let's enjoy Chuki Life!
|
n240sxfnatic
Offline
595 posts
West Des Moines Iowa
3-25-2007
|
| « Re: Post your wheel setup (yokota180sx) | 6:34 PM 1/3/2008 |
|
- Work Emotion cr kai
- 17
- 8
- +25
- clears z brakes by about an inch
- sitting on jic coilovers about 1/4 inch of coilover clearance
- fenders rolled
- 225/45/17
Modified by n240sxfnatic at 6:47 PM 1/3/2008
|
rbsileighty
Offline
1657 posts
92 S13 Hatch w/ RB20 & 09 White Frontier Pro4X 6MT 4x4
MI
2-9-2003
|
| « Re: Post your wheel setup (n240sxfnatic) | 2:23 PM 2/14/2008 |
|
- Wheel Brand: Volk CE28N- Diameter: 17" - Width: F 9 / R 9.5 - Offsets: F +15 / R +22 - Brakes: Stoptech 13" kit (which does fit 17's... reply to above post) - Suspension modifications: Cage, Hicas Swaybars, Hicas elim, Kei Office XT coilovers, Tein Tierods and Ends - Fender modifications: Highly rolled and pulled front and front w/ no fender liner up front due to ride height - Tire Sizes: because they were free 235F/245R... going bigger when I finish with these - Any other relevant info: don't be afraid to roll/pull your fenders... just take your time and use a proper roller... 
And... it was just for fun
17x10 +12 on the rear w/ 245 tire
 The Project The Old Wheels - SOLD The Cage
|
blues14
Offline
451 posts
1995 Nissan 240SX GTS-t
Seattle WA
4-19-2005
|
| « Re: Post your wheel setup (rbsileighty) | 5:26 PM 3/5/2008 |
|
18"x8" F/R
+30 f/r
Nissan oem 350z touring
tires 225/45r18 front
245/45r18 rear
Tokico blues with espiler ASD springs
no fender mod
clears big breaks(r32)
My s14
|
fuse=--action
Offline
104 posts
'91 240sx
Missouri City TX
1-21-2008
|
| « Re: Post your wheel setup (blues14) | 8:00 AM 3/13/2008 |
|
Nissan base model 350z "Enthusiasts" wheels, staggered stance
17x7.5 +30
17x8.0 +33BF Goodrich G-force Super Sports up front
225 45 17 Potenzas in the rear (they came with the wheels, and will be changed to match the fronts soon enough)
235 50 17 Clears Z-brakes with ease.
Fits flush, no spacers, no rolling/pulling.
Had to get shorter sidewalls up front because they loooked like truck tires and because they barely clear the stock suspension. 
-fuse.
|
| First 1 2 > Last |
