flatrate
Offline
136 posts
S14 kouki
seattle wa
8-31-2009
|
| « Re: (GSDKinked) | 6:57 PM 11/22/2009 |
|
i have lots of items for sale email me for pictures Ba4turbo@comcast.net I have 2 GT3076R turbine housings.. .63ar 4 bolt housing 150 shipped .82ar Vband housing 250 shipped i have the factory exhaust manifold heat sheild for RB25 has a bent corner but its still fits nicely 25 shipped stock Rb25 intake manifold bare includes Throttle body minus TPS sensor 50 plus shipping Mckinney motorsports RB20 tranny mount and cross member 50 shipped stock rubber air intake tube with all the stuff that plugs into it ... (rb25) 30 shipped Rb26 MAF broken flange but can still be used with a slip on filter came with my swap... (wrong one) 40 shipped stock RB25 clutch (disc and pressure plate) in great shape lots of life left.. 40 plus shipping SAFC 2 works fine in good shape no major blemishs (black in color) SOLD stock RB25 coil pack cover decent shape 40 shipped tomei oil restrictors i have 2 15 each shipped
Modified by flatrate at 7:27 PM 12/1/2009
|
HxC_Nismo
Original? Creative? Eh.

Offline
696 posts
98' Nissan 240sx SE R33 RB26DETT
Columbia MO
9-23-2006
|
| « Re: (GSDKinked) | 1:26 PM 11/24/2009 |
|
r33 RB25DET Nismo Short Shifter SOLD!!!
Modified by HxC_Nismo at 7:12 AM 1/18/2010
 -Hans- 98' 240sx SE R33 RB26DET-Under Construction(project 800hp) 02' Sentra SE-R- Daily Driver

|
ANVIL

Offline
888 posts
RB25DET S13
Anchorage ALASKA
4-8-2007
|
Wtb rb25 stock exhaust camemail ajgaetos at hotmail.com
|
DriftingisLame

Offline
963 posts
'91 240sx coupe, rb20det
Eugene OR
2-2-2005
|
| « Re: (DriftingisLame) | 3:21 PM 11/24/2009 |
|
| Quote, originally posted by DriftingisLame » | | FS: 10k old Spec STG 3 clutch. Rated at 489 ft lbs of torque, its a sprung 6 puck. I bought this a while back hoping for big power, but sadly never saw more than about 250, with probably 220 ft lbs. I am now back to a stock turbo and dont want to run this clutch again, as I do not need it. Yes its a 6 puck so there is some wear, it worked great when I pulled it. The spring mounts look kinda beat on but the clutch should be fine, either way the clutch cost $400 new, worst case scenario you might want to think about a new disk soon. I just want a good condition stock clutch, preferably brand new or newer + some cash. I'll also trade for a lightened flywheel. Or you can buy it for $200 shipped. Please e-mail me at maxdamilli0n at gmail dot com. Thanks! -Max |
I'm now only looking for your stock GOOD CONDITION rb20/25 clutch + $100. I am getting closer to putting my motor back in and I really dont want a clutch like this to be put in with a stock setup! Shoot me some pics of your stock clutch and lets make a deal! Maxdamilli0n at gmail dot com -Max
Fast car huh?......You've never heard of my s13? Its the 240 that made the Kessel run in less than 12 parsec's...
|
GSDKinked
Online
422 posts
1997 240SX LE
West Chester Pa
7-17-2008
|
| « Re: (DriftingisLame) | 5:41 PM 11/24/2009 |
|
(4) Nismo sidefeed 550cc Injectors. I was going to complete the set by purchasing 2 more but I scored 740s and a rail. So these are going up for $300 shipped. I'll post pics when I can take time to take pics of them. IF you need pics asap Email @ C.Ekhato@gmail.com
<IMG NAME="icon" SRC="http://images.nicoclub.com/forums/images/smilies/hide.gif" BORDER="0">
|
GSDKinked
Online
422 posts
1997 240SX LE
West Chester Pa
7-17-2008
|
| « Re: (flatrate) | 8:15 PM 11/26/2009 |
|
I also have a Z32 ECU for sale. It reads CG A18-A76 and the label states Jim Wolf Technology P.O.P Upgrade package 90-92 300ZX Turbo Fed. MT EZ320-TMF00I paid $300 looking for $250 shipped. WTB ASAP IMMEDIATELY AND ANY OTHER SYNONYM FOR NOW!!!!!! RB25DET S1 Harness UNCUT. I have plenty of parts to trade.... R33 Factory Anniversary Edition Momo Steering wheel Momo "Drifting" Race Wheel BLK/YLW 300ZX ECU (Can be used to Nistune to tune RB25DET Engine)
Modified by GSDKinked at 3:21 PM 11/27/2009
|
preston240sx

Offline
499 posts
S13 240sx
San Diego CA
10-5-2004
|
| « Re: (GSDKinked) | 9:09 PM 11/27/2009 |
|
im trying to unload this for the holidays so please feel free to buy this baby also have other rb20 parts laying around hit me up http://cgi.ebay.com/ebaymotors...4318d 120 shipped great turbo awesome condition would rather skip egay so we could for go there fee's
Modified by preston240sx at 9:15 PM 11/27/2009
Part of the Running RB Association ...... it lives 1990 sil40 rb power yeah its the spit 2006 Nissan Titan Daily Driver
|
lxmobxl2
Offline
21 posts
95 w/rb25, 02 R1
Riverside CA
4-23-2007
|
| « Re: (preston240sx) | 10:20 PM 11/27/2009 |
|
Wtb S1 Rb25 Camshaft Retainers. (those bolts that hold down the camshaft). Seems i lost a few and was wondering if anyone had any laying around? Email me at lxmobxl2@hotmail.com with pics/prices. Thanks
|
MATTs14
Offline
439 posts
Red 1995 Nissan 240sx
Lewisburg TN
6-28-2007
|
| « Re: (bigfootap) | 8:33 PM 11/29/2009 |
|
I have a set of 6 Precision 880cc top feed injectors that are brand new in the box and a resistor box that will make these injectors a drop in affair with the use of a top feed fuel rail. I'm asking $450 + shipping for them. If you would like to contact me about the injectors and resistor just email me at mattamus240@yahoo.com or text me at 9319939696. Thanks!!
Modified by MATTs14 at 8:42 PM 11/29/2009
|
GSDKinked
Online
422 posts
1997 240SX LE
West Chester Pa
7-17-2008
|
| « Re: (240neosx) | 6:05 PM 11/30/2009 |
|
New prices::4 Nismo Inj. 555cc-$160 shipped. R33 Momo Wheel-$350 Shipped 300ZX TT ECU- $200 shipped Someone buy one of these so i can get my harness.......!!!!!!!!!! Paypal and email C.Ekhato@gmail.com
|
flatrate
Offline
136 posts
S14 kouki
seattle wa
8-31-2009
|
| « Re: (GSDKinked) | 7:28 PM 12/1/2009 |
|
i have lots of items for sale email me for pictures Ba4turbo@comcast.netI have 2 GT3076R turbine housings.. .63ar 4 bolt housing 150 shipped .82ar Vband housing 250 shipped i have the factory exhaust manifold heat sheild for RB25 has a bent corner but its still fits nicely 25 shipped stock Rb25 intake manifold bare includes Throttle body minus TPS sensor 50 plus shipping Mckinney motorsports RB20 tranny mount and cross member 50 shipped stock rubber air intake tube with all the stuff that plugs into it ... (rb25) 30 shipped Rb26 MAF broken flange but can still be used with a slip on filter came with my swap... (wrong one) 40 shipped stock RB25 coil pack cover decent shape 40 shipped tomei oil restrictors sold
Modified by flatrate at 1:09 PM 2/7/2010
|
bigfootap
Offline
16 posts
1991 240sx coupe
Little River SC
7-15-2009
|
| « Re: (flatrate) | 11:50 AM 12/2/2009 |
|
WTB: Good condition rb20/25 power steering pump!email at bigfootap@hotmail.com
|
Cjmartz2k

Online
1455 posts
'92 Skyline w/RB25 & Holset HX40
K Vegas NC
5-19-2007
|
| « Re: (HxC_Nismo) | 8:56 AM 12/5/2009 |
|
Set of 6 series II coil packs- $80 plus shippingR32 Gauge cluster- $50 plus shipping email me
 My R32 GTSt = 11.8 @ 124mph
|
metalmulishiaS13
Offline
35 posts
'89 Nissan 240sx with a RB25det and hopes and dreams
Georgia
8-26-2004
|
| « Re: (Cjmartz2k) | 4:52 PM 12/7/2009 |
|
WTB: good condition crank pulley for a series 1 RB25det. My email is lancerevolution02@msn.com.
I <3 Dan (240sx2nr95) He's my hero.
|
mott6904
Offline
614 posts
rb20 big turbo big cams s13, 97 kouki, turbo audi a4,turbo busa
greenwood in
1-30-2007
|
| « Re: (metalmulishiaS13) | 7:14 PM 12/8/2009 |
|
Head and intake manifold SOLD>SOLD>SOLDHks low mount exhaust manifold with hks 50mm wastegate $600.00 T3 and t4 bolt pattern, divided, comes with turbo feed and return line. Can have cermaic coated at extra cost All prices are negotiable, all parts have about 1000 miles on them, all parts are still on the car. Contact me at mott6904@sbcglobal.net.....thanks Modified by mott6904 at 6:17 PM 2/1/2010
Modified by mott6904 at 9:14 PM 2/17/2010
Signature Was To Big
|
Chaos the Xile

Offline
778 posts
1974 Datsun 260Z
Latonia KY
2-9-2006
|
| « Re: (mott6904) | 8:50 AM 12/10/2009 |
|
***USED*** RB26DETT Individual Throttle-bodies and PlenumSOLD PLEASE REMOVE THANKS
Modified by Chaos the Xile at 7:49 AM 1/27/2010
 S1 RB25|REBUILD IN PROGRESS... COMPOUND TURBO KIT|KICKING AROUND A PROTOTYPE WTB: N1 Water Pump, Tomei Timing Belt AIM: chaosthexile E-Mail: chaoskid282@yahoo.com Myspace: www.myspace.com/chaosilvia
|
nismo8117
Offline
58 posts
93 SilLine
Killeen Tx
11-16-2008
|
I have a Brand New in box CP pistons for rb25det 86.5mm, precision 680cc injectors brand new as well, rb26 resistor pack, and a brand new set of eagle rods up for salepistons $700 obo shipped

 resistor pack $100 shipped

rods 500$ obo shipped
 email me at homermartinez1@yahoo.com
Modified by nismo8117 at 7:34 AM 12/19/2009
Modified by nismo8117 at 7:49 AM 12/19/2009
Modified by nismo8117 at 2:55 PM 2/8/2010
Modified by nismo8117 at 10:21 AM 3/8/2010
 every time a Skyline dies...a S13 gets its wings
|
black240jl
Offline
248 posts
black 240sx
carterville IL
7-19-2007
|
| « Re: (Boostedkouki23) | 9:20 PM 12/10/2009 |
|
i have a rb20det swap fro sale, has 2 studs broke off in head, not really a big deall, new full gasket kit,60K miles, rb25 turbo, aftermarket intake manifold,2" aluminum radiator r32 cross member and trans crossmember exedy stage 2 clutch , short throw shifter, harness wired for s13 ecu no maf or bov, have intercooler also and some piping and couplers, wanting 1500 obo for everythnig needs turbo lines water pipe andwaterneck modified for intake manifold needs different throttle body or different flange welded on, and thats pretty much about it, call or text or whatever, thanks 6185594276 located in carterville IL 62918 if u want a part shoot me a offer i cannot refuse thanks needs to go
|
datsunmotorsports

Offline
139 posts
74 260Z , 71 240Z , 71 510 wagon , 68 Fairlady 2000
Sacramento ca
1-14-2007
|
| « RB20DET parts | 5:39 AM 12/11/2009 |
|
Block was dropped or involved in an accident that tore the alternator from the block breaking the corresponding mounting tabs. It has good compression, but the block needs replaced or repaired.If someone has a cheap bare block in good shape Im interested in checking it out. Alternatively I could part out what is left. head cams upper intake manifold polished clutch flywheel exhaust manifold air regulator coolant sensor good rotating assembly water pump(damage to the 2 bolt holes where the alt bracket goes)
coils ignitor pack coil harness throttle body tps sensor lower timing cover Let me know what you need and make an offer Sold some parts CAS, valve covers, injectors and rail, and oil pump. $200obo for the rest. If you have a block please pics and price rayaapp2@hotmail.com
Modified by datsunmotorsports at 2:19 PM 12/14/2009
Ray
|
Chaos the Xile

Offline
778 posts
1974 Datsun 260Z
Latonia KY
2-9-2006
|
| « Re: FS: 76 Datsun 280Z w/ RB26 (not installed) in PA (AlmightyWez) | 2:07 PM 12/16/2009 |
|
SOLDUSED - S13/RB25 1PC STEEL DRIVESHAFT $150 USED S13/RB25 COMPLETE WIRING HARNESS $250
PLEASE REMOVE THX
Modified by Chaos the Xile at 8:18 AM 1/27/2010
|
240_jz
Offline
53 posts
Statesville NC
10-2-2008
|
I have some rb parts for sale:-Nissan Skyline RB26 Greddy/Trust clear timing cover...$70 free ship
 -R33 Nissan Skyline Climate Control(no wiring included) .... $35 Free Ship
 I am located in NC, if you are interested in any of the parts listed, email me at: breaker_240jz@yahoo.com
|
wakesslide12
Online
7 posts
'90 hatch '07 titan '04 jetta '06 charger top banana
Bartlett Tn
4-3-2008
|
| « WTB RB20 Parts | 2:44 PM 12/19/2009 |
|
Looking for an uncut and unmolested RB20 harness from an r32 Call or text me (901)552-6119 need one ASAP
|
twindragonn
Offline
27 posts
medford or
7-17-2009
|
| « Re: CLASSIFIDES THREAD! Read Rules Before Posting! (Joe) | 5:50 PM 12/21/2009 |
|
i have a rb25 greddy intake manifold with infinity q45 throttle body in new condition except for a couple areas where the prior owner decided to start sanding down the casting in a couple areas to polish it or somethen idk they didnt get very far anyways im asking 950 obo or trade for a silvia hood and some cash on top dont be afraid to offer jus no low balln u can email me at twindragonn@yahoo.com and i get back asap and pics on request
|
EJ8 944
Offline
29 posts
Ogden UT
8-14-2009
|
| « Re: CLASSIFIDES THREAD! Read Rules Before Posting! (twindragonn) | 7:53 PM 12/23/2009 |
|
WTB:1 or 2 RB26 stock MAF's, reason why one will work is that I see flatrate has one for sale a few posts above, so if you have one or a pair, I'm interested. Email is phillysmostwntd9@hotmail.com, If you want to check shipping I'm in northern Utah, Salt Lake City area.
|
Vkoslak

Offline
677 posts
1992 240SX SE RB20DET, 95 BMW M3
Cedar Park TX
2-16-2003
|
SOLD
Modified by Vkoslak at 6:20 PM 3/15/2010
|
DriftingisLame

Offline
963 posts
'91 240sx coupe, rb20det
Eugene OR
2-2-2005
|
Looking for a few things to put my motor back together. RB20 SMIC COLD piping with BOV N60 Maf adapter (for aftermarket filter) Last things I need to finish my motor! Thank you! -Max Maxdamilli0n@gmail.com Modified by DriftingisLame at 12:26 PM 1/6/2010
Modified by DriftingisLame at 11:25 AM 1/7/2010
|
neonbomb
Offline
452 posts
Pittsburgh/Detroit
4-22-2007
|
| « Re: (DriftingisLame) | 9:20 AM 1/7/2010 |
|
WANT TO BUYGreddy Intake Manifold Exhaust manifold (quality tubular only, any flange/orientation) Push type RB25 clutch Email: syncade (at) gmail (dot) com
Modified by neonbomb at 9:32 AM 1/7/2010
95' s14 Stock + rb25 neo
|
AlmightyWez

Offline
30 posts
76 280Z
Dublin PA
3-8-2009
|
| « RB26 in PA for $2000 | 9:03 AM 1/10/2010 |
|


 Now that I've sold the Z, the RB is next to move. I have a mostly complete RB26, minus the TURBOS/O2 and ECU (It comes with all the intake manifold parts, TBs, injectors, harness, exh manifolds, balanacer, oil pump, valve covers, coils/power transistor etc), that is torn down to the short block. The block still has nice cross hatching in the cylinders, pistons aren't dented or anything and the bottom end bearings looked fine when I took them off. The head is still together (valves, valve seals, springs etc) and looks fine. Cams show no major wear. I think this would be a nice starting point for someone who wants to do a stockish build and just throw some new bearings/gaskets in and go. Also comes with a nice RB25 pan/pickup, this is the pan you'd need to do the swap into a 240SX body. I'd rather not try to ship everything but if the buyer wants to arrange everything, I'll work with them. I DO NOT WANT TO PART IT OUT RIGHT NOW, I'd rather sell it all and not get stuck with parts I can't do anything with. This would be perfect for you 240SX guys, since the RB25 pan is what you'd need to do the swap and most people pay 2500+ for an RB20/25, so a 26 at this price is a steal I think . I think $2000 is a good price for everything. Best way to get me is email reddevil76969@yahoo.com
76 280Z - Project "GodZilla"
|
HIGHFIV5

Offline
71 posts
1989 240SX
Red Deer Alberta
6-21-2009
|
| « Re: CLASSIFIDES THREAD! Read Rules Before Posting! (Joe) | 9:06 PM 1/10/2010 |
|
WTB: 1. Unmolested RB20 Wiring harness or CLEANLY pre-wired RB20 Harness for S13 even.2. Also looking for a nice turbo elbow (3") that will have proper clearance with the R32 crossmember. Syko performance or any others that you know of that clear the steering shaft nice. EMAIL: frankandbeans69@hotmail.com
"Technology is the only replacement for displacement."
|
neonbomb
Offline
452 posts
Pittsburgh/Detroit
4-22-2007
|
| « Re: (neonbomb) | 9:44 AM 1/11/2010 |
|
| Quote, originally posted by neonbomb » | | WANT TO BUY Greddy Intake Manifold Exhaust manifold (quality tubular only, any flange/orientation) Push type RB25 clutch (email me your pull types also if you desire) Email: syncade (at) gmail (dot) com Modified by neonbomb at 9:32 AM 1/7/2010
|
|
HxC_Nismo
Original? Creative? Eh.

Offline
696 posts
98' Nissan 240sx SE R33 RB26DETT
Columbia MO
9-23-2006
|
| « Re: (neonbomb) | 6:06 PM 1/11/2010 |
|
1000cc injectors SOLD Modified by HxC_Nismo at 4:29 PM 1/15/2010
Modified by HxC_Nismo at 7:14 AM 1/18/2010
|
HxC_Nismo
Original? Creative? Eh.

Offline
696 posts
98' Nissan 240sx SE R33 RB26DETT
Columbia MO
9-23-2006
|
| « Re: CLASSIFIDES THREAD! Read Rules Before Posting! (Joe) | 6:14 PM 1/11/2010 |
|
used tomei 600cc low impediance injectors for rb26, 10.5mm (will fit in stock rb26 fuel rail) ***SOLD***
Modified by HxC_Nismo at 5:20 PM 1/30/2010
|
Reaper

Offline
122 posts
96 & 91 240sx
Fort Worth TX
2-19-2007
|
| « WANTED: rb25det flywheel | 3:29 PM 1/12/2010 |
|
i'm looking for a stock flywheel in good condition or a stock replacement that IS NOT aluminum. Let me know what you guys have please. I need this QUICK.
Modified by Reaper at 6:15 PM 1/12/2010

|
HxC_Nismo
Original? Creative? Eh.

Offline
696 posts
98' Nissan 240sx SE R33 RB26DETT
Columbia MO
9-23-2006
|
| « Re: WANTED: rb25det flywheel (Reaper) | 4:44 PM 1/12/2010 |
|
what rb flywheel do you need cause i have both rb25 and rb26 flywheels (yes there oem stock flywheels) email me hxc_nismo@yahoo.com if you want to buy one
Modified by HxC_Nismo at 3:55 PM 1/13/2010
|
S13RaceBred25
Offline
3 posts
1989 240sx
milwaukee wi
1-4-2010
|
| « Re: (bigfootap) | 9:01 PM 1/12/2010 |
|
Looking for RB25/S13 harness. Already wired together so i dont have to mess with any of the wiring and screw up somewhere. Ive seen some people selling them all ready to plug to RB25 and throw into S13. Really need. Please email back omarar20@aim.com
|
boosted98gst
Offline
149 posts
marysville ohio
7-3-2005
|
| « Re: (S13RaceBred25) | 11:33 AM 1/13/2010 |
|
WTB RB25DET S1 Coilpacks x6 Has to be S1 ive been ripped off 2 times and now stuck with 12 coilpacks that I can not use. No rb20 coil's Looking for a Sr20det downpipe no janky egay brand, im willing to buy a decent downpipe.
|
meet07
Offline
602 posts
24 valved 89 240sx from a legendary vehicle
Wake Forest NC
5-8-2007
|
| « Re: (boosted98gst) | 4:23 AM 1/14/2010 |
|
i have 6 q45 coil packs that are for sale...There the same as the S1 rb25det...Asking $100 shipped in the USA. let me know
267whp-233tq rb25det,12psi,fmic,jvtr exhaust, freddy intake, pod filter
 spec 6puck clutch,lite fly, j30 diff, and more....
|
Boostedkouki23
Offline
24 posts
98' Kouki
305 FL.
2-21-2007
|
RB25/26 Centerforce twinplate clutch for sale about 75% left on clutchs i will have pics tonight im pulling the tranny off today! Looking to get $700 shipped for it dont be scared to make offers!!Email: Boostedkouki@hotmail.com
|
StricNyne

Offline
3112 posts
10-30-2003
|
i am looking for some 11mm injectors any size over 600cc and any brand. let me know what you got! top feed low impedencestricnynel0s@yahoo.com thanks in advance !
|
| First 1 2 3 4 > Last |