B16 Shopping List/Info on Parts Available

[graphicdude]

I think there should be a thread in here that lists off all the stuff that is currently available or is confirmed to be in development for the B16. I think it will eliminate all the searching and clicking through pages to get it all.

This is what I have put together so far, please feel free to add to this list:

Exterior

StillenStrut Tower BraceRoof WingLip KitRear ValanceRear Wing

Intake

FujitaWeapon RInjen (MR20)Injen 2.5/SE-R/SE-R Spec V CAI (they call it SP and say it's more than a CAI, I say they need to quit adding acronyms and just call it what it is - nametakennow)

Suspension

Eibach (Sportlines and Pro-Kits)2.0/S/SL Springs SER & Spec Springs

H&R[url=http://hrsprings.com/scripts/appguide.p ... |%20Sentra]Sport springs[/ur]

TanabeDF210 springs

Others K-Sport coiloversMegan Racing coiloversTEIN - S.Tech and H.Tech lowering springs, as well as the Basic and Super Street full coilover kits (in development)

SPC Performance - Camber Kit

Engine

WRP TechGrounding Kit (QR25)Underdriven Pulley (QR25)Oversized Valves (QR25)

Stillen pulley

Turbo KitTurbonetics (Under development, will be similar to 04-06 SE-R kit)

Exhaust

VRSBRM - Best bet is to contact Greg (AZHitman) directly - [email protected] (2.0)Greddy Ti-C (Site says "rear muffler cat-back only" - Pretty sure this means no resonator. )

Short Shifter

Racing Line Performance (Spec V)TWM Performance

Some additions by batmank0s.

[jbarbaresi]

I think there should be a thread in here that lists off all the stuff that is currently available or is confirmed to be in development for the B16. I think it will eliminate all the searching and clicking through pages to get it all.

This is what I have put together so far, please feel free to add to this list:

Exterior

Stillen.com -front & rear valances, spoiler and rear window spoiler

Air Kits

Fujita http://www.f5air.comInjen.com

Suspension

Eibach.com -springsKsportusa.com -coiloversMeganRacing.com -coilovers (in development)

Engine

Exhaust

BRMGreddy - in development

where did you get this information from?

stillen's exterior body components are for the sentra 2.0, not the spec v. the only thing available for the spec v is a lip spoiler.

as far as air intake kits, to my knowledge neither fujita or injen have released anything yet. injen is expected to release shortly. however stillen has released a cai for the 2.0, and weapon r has released a short ram for the 2.0.

as far as suspension, eibach is the only one with anything released, ksport is still in the making, i haven't heard anything from megan racing.

exhausts... brm and vrs have catbacks for the spec v's and se-r's. stillen has a catback for the 2.0 and one on the way shortly for the spec v. as you said, greddy has one in the works, as well as injen expected early 2008.

anyone have anything to add?

[graphicdude]

Because a lot of vehicles share the same chassis, don't you think that the Stillen Body Kit pieces would fit the SER/Spec V?

There was a thread earlier showing the Fujita CAI on EbayA guy on here was testing out an Injen Kit for InjenI spoke to Megan Racing and they told me they were developing a coilover.....Also I got a reply back from TEIN and they will be developing S.Tech and High.Tech lowering springs, as well as the Basic and Super Street full coilover kits. K sport has the coilover kits already listed on their website.

[nametakennow]

Front/rear valences are a matter of bumper design, not chassis. You could measure the 2.0 and the SE-R/Spec V bumpers and see if they have the same dimensions to figure out if the parts are cross-compatible.

This is a good list. I'll put a link to it in the Table of Contents sticky up top.

[jbarbaresi]

Because a lot of vehicles share the same chassis, don't you think that the Stillen Body Kit pieces would fit the SER/Spec V?

There was a thread earlier showing the Fujita CAI on EbayA guy on here was testing out an Injen Kit for InjenI spoke to Megan Racing and they told me they were developing a coilover.....Also I got a reply back from TEIN and they will be developing S.Tech and High.Tech lowering springs, as well as the Basic and Super Street full coilover kits. K sport has the coilover kits already listed on their website.

i don't think a lot of those body kit components for the 2.0 will fit on the spec v because of differences in fender design, i know for a fact that the grilles they sell for the 2.0 do not fit the spec v because i already tried, the grille designs are completely different. the fujita intake is listed for the 2.0 only, and it's not on their website yet so i don't know how reliable that ebay vendor is. the guy testing out the injen cai had a protype, i just got an email back from injen yesterday saying it will be released "very shortly", but don't know how long that is. even though ksport already has the coilovers listed on their website, it is a mistake and they will not be out for another month or so. haven't heard anything from tein, so hopefully if they are releasing shortly that will give people another suspension option.

keep giving us updates as you get them...

[nissantech06]

I have emailed almost all of the above companies, Injen and Fujita will "officially" release the intakes by January. Greddy has an exhaust in R&D, if you check their website they show the car in development. Most of those companies have emailed me back verifying the parts coming out.

FYI, suspension will bolt-up to either car, the exhaust SHOULD bolt on, it is routed the same way, I checked this recently when we had a 2007 Spec V in our shop.

[nametakennow]

Are the hangers in the same location?

On the B15s, the only difference was hanger locations. It was kinda stupid, IMO, but it meant that SE-R exhaust didn't fit until you got the hangers cut/moved.

[metaltunr]

06 sentra megan racing street series coilover is "on the shelves and ready for purchase" so to speak, the only site i have looked on and found them by accident is http://www.horsepowerfreaks.com . if you want a set i say check em out and google the basic description of them and read up as much as possible. i myself am getting a set and from what i've read install is simple and fairly quick(2-4 hours). hope i was of some help to anyone who was wondering.

[graphicdude]

How much are those Megan's going to be?

[pcoyote]

H&R has a set of springs also. I went to a local shop to get a quote on the Eibach's and they quoted the same price for the H&R. They are supposed to be a little lower than the Eibach's. I found a couple of places on the web that said they aren't available until mid March 08 though.

[gforever]

Hey graphicsdude! I saw your signature pic w/ the B16 Sentra and those wheels look hot! Which wheels are those? They resemble the new SE-R wheels which is what I am also looking for. Has anyone seen side skirts aka "center mudguards" for sale for the regular Sentra'07/'08? Thanks.

[jbarbaresi]

Hey graphicsdude! I saw your signature pic w/ the B16 Sentra and those wheels look hot! Which wheels are those? They resemble the new SE-R wheels which is what I am also looking for. Has anyone seen side skirts aka "center mudguards" for sale for the regular Sentra'07/'08? Thanks.

those look like motegi rsv

[graphicdude]

They are Enkei RSVs in Anthracite, they will be going on this spring once the snow is gone. I did the photochop to see what they would look like and I am very pleased with the result Can't wait to put them on and lower this thing!

If you find OE side skirts for sale that are for the SE-R/Spec Vs, let me know, I want a set as well.

[batmank0s]

What has everyone seen so far i'm gonna do my best to keep this list updated with parts...so you 07+ drivers should sticky this...and if you happen to see anything not listed or a dead link pm me so i can add/fix the list

Things are listed by maker not website....so you might click on say injen and go to stillen.comMost of the Parts unless stated will work for all trims of C/B16......

Eibach-----2.0/S/SL Springs-----SER & Spec Springs-----Anti-Roll KitInjen----- Cold Air Intake(QR25)K Sport Usa----- COILOVERSMegan Racing-----COMING SOONStillen-----Strut Tower Brace-----Roof Wing-----Lip Kit-----Cat Back Exhaust-----Rear Valance-----Rear Wing-----Hi Flow Intake(MR20)-----Brake Kit-----RotorsWRP Tech-----Grounding Kit(QR25)-----UnderDriven Pully(QR25)-----Oversized Valves(QR25)
Modified by batmank0s at 11:29 PM 3/9/2008

[nametakennow]

Ack, we have a thread just like this already. However, this one does have the nifty links.

I'll work on merging the threads later today, or, even better, if you could take all this info and post it in that thread (there's a link in the Table of Contents in my sig), and it can then be edited into the original post.

Awesome contributions! FYI we don't have PM's.

[batmank0s]

i'm cool with merging the list across or if you want you could redirect to this one...i went thru the list you had and ksport was the only one who had parts i could find for the C/B16

[nametakennow]

Update: Merged the threads. Graphic, if you'd like to add the info and links in the post above to your original post, that'd be good stuff.

If you want I can copy and paste into your post directly from his to save some hassle. I like the link structure as well, so could you add links (preferably to NICO-sponsored vendors) to what you've already got? Again, I can do this if need be, but I prefer not to mess with members' posts unless asked (or, of course, when there's something inappropriate).

[graphicdude]

Go right ahead, you can alter it however you need to

[nametakennow]

I'm on it.

[batmank0s]

great job on the merge....i'll edit my posting time to time as i find new parts on the market

does anyone know when nismo is gonna let our parts for the new engines....the Z also got a new engine in 07
Modified by batmank0s at 10:39 PM 3/10/2008

[khmerboiracer]

greddy just released the spec v/se-r catback exhuast..checked the other night..

[nametakennow]

Updated the list.

Remember to post your exhaust clips in the exhaust thread listed in the ToC!

[graphicdude]

Updated as well, no anti roll kit, stillen screw up and there is a Camber kit available

[nametakennow]

Alright kiddies, I've added some stuff.

- Megan Racing has completed their coilover kit.- Tanabe has some springs out. - There's a turbo kit under development by Turbonetics.- Still no aftermarket shocks/struts so far as I've seen. Coils are the ONLY way to get everything at this point. That said, no one here who has Sportlines has blown a shock yet.

Anyway, free bump for this list. Post up if you have something to add.

[gforever]

Any news on aftermarket or pre-painted OEM like side skirts for the B16 Sentra?

[08sentra2.0sl]

hey, you all I recently bought a 2008 sentra 2L and was wondering if you can turbo a cvt?

Please

[nametakennow]

Yes, you can. No one's done it on a Sentra yet. You have to be careful with how much boost you run. One of our Altima moderators destroyed his CVT with too much power.

[08sentra2.0sl]

Thanks , ya im only going to run about max 8psi jst to give me more power and then all the other little add ons exhaust,intake,etc..

[nametakennow]

Well the turbo requires that you replace your intake and exhaust system with turbo parts/piping.

[about3blank]

FYI, there's also a short shifter out by TWM:

http://www.twmperformance.com/...s.htm

for some reason, you can't get to it yet by going to their home page. i just found this one by chance on google.

it's a bit more expensive than the racingline one. am i for sure better off with one or the other? is one distinctly more reputable than the other? i was gonna get the TWM one just because i was getting the M1 abrams knob anyway.

also, is there no way at all this would fit on a sentra 2.0 base model (NOT spec v) or are they completely different?

thanks.