Z32 vlsd in abs S13- searched

[SX APPEAL]

ok, as far as I know I have an NA Z32 vlsd w/ J30 axles ready to put in my 91 S13. My car has abs, im kinda wondering if the fitment will be an issue... is the Z32 diff 3/4 of and inch shorter than mine or the same? Also I know that the S13 diff is supposed to have the abs sensor at the snout of the diff. My Z32 lsd has no such sensor (which brings up the length question). I've also read that the Z32 has the abs sensors on the sides, on outputshafts I assume. I cant find any electrical connections anywhere on my Z32 diff. What does this mean and what do I need to do? thanks

[574-240sx]

If it doesn't have the abs sensor on the front snout then you need to swap it into your casing. Also if your car had ABS from the factory then you should have a VLSD to begin with.

[SX APPEAL]

If it doesn't have the abs sensor on the front snout then you need to swap it into your casing. Also if your car had ABS from the factory then you should have a VLSD to begin with.

I figured I'd have to swap it... how much trouble is that?

Im sure I dont have the lsd, she's quite the one wheel wonder- especially when powerbraking. It's a 91 LE- no hicas, no lsd, abs

thanks