Z32 VLSD,5Lug+Big Brake Swap into s13?

[A3RO_M3X]

I have read many threads about the z32 vlsd install and 5Lug Big Brake Swap and i understand it all for the most part!! But the thing is, I actually have a N/A 300zx that i bought really cheap for Parts Upgrade and well............ I plan on Doing the z32 5 lug + Big Brake Swap AND the VLSD Swap into my s13 Since i have the whole 300zx !! So Can anyone HELP ME out, Can i just bolt everything Up since i have everything from a 300zx at my Disposal ? Oh and plus...... Wat all can I Swap from a N/A 300zx into my 240sx. Like Bolt On's Or Little Fabrication needed Swaps. Im not talkin bout Engine or transmission Cuz i know thats a whole different STORY!!! I Really Appreciate Any Advice, Help, or jus Tips. Thanks Alot PeoPle!!!!!!

[240daveTX]

you should put this on 240sx.org

[-RJ-]

the brakes, lugs, rims, rear uprights, and motor if your bored enough.

[serah31500]

If you want to use the z32 diff in your s13 you need to swap the cover on to the z32 diff from the s13 one. If you want to use the 5 bolt output shafts that are already on the z32 diff you will need the axle shafts from a 1993 infiniti J30.If you want to use your s13 6 bolt axles you will need to buy s14 lsd output shafts here are the part numbers for those 38220-52F01 and 38220-92L00.

[1SickSilvia]

That is one helpful reply

If you want to use the z32 diff in your s13 you need to swap the cover on to the z32 diff from the s13 one. If you want to use the 5 bolt output shafts that are already on the z32 diff you will need the axle shafts from a 1993 infiniti J30.If you want to use your s13 6 bolt axles you will need to buy s14 lsd output shafts here are the part numbers for those 38220-52F01 and 38220-92L00.

[serah31500]

I should also mention that you will also need the appropriate sized bolts and washers to bolt the diff up to the car. This is a very important safety issue that MUST be addressed so when you are stripping off the diff from the z32 its a good idea to save the bolts.Here is a comparison of the s13 and z32 bolts.

[A3RO_M3X]

Hey man i found this perfect Site for the VLSD Swap. http://www.ka24development.com/vlsd.html Check it out its really Detailed and Specific for any Type/ j30,z32, It has it all!!!!!