z32 maf wiring ??'s

[Fla S13]

ok on the z32 maf wiring, the green/yellow dose not get hook up to anything?i know the black/white goes to spot "E" on the z32,and green/balck go to "B", but for "D"and"C" are u sopose to run and outside ground like from the car to the maf? and which one would u connect it to "D"or "C", im just being causious becasue i fried my last ecu trying to hook it up...

DJ

[Jezz_s13]

http://www.sxoc.com/site/static/z32afm.php

[Fla S13]

ok so pin "D" is just left open? and i just hook up the all back(ground) to pin "C"?

DJ

[pulsar gtr]

Ya, green/yellow doesn't hook up no where

black/white (12v) go to "E" on the z32Black (ground) connects to "D" & "C"Green/black (0-5volts signal) connects to pin "B"

PULSAR GTR

[Fla S13]

ok im still kinda confused on what to do with "D"+"C", i splice those 2 wires into the 1 black on the ca harness? or am i sopose to use a outside ground to one of them?

Dj

[pulsar gtr]

connect D&C together(solder them together) to the back on the ca harness

PULSAR GTR

[Fla S13]

sweet thanks guys i got it all hook up now with no problems

Dj

[Notchbackca]

yeah the center pins BOTH need to be hooked to ground

[float_6969]

Courtesy of pulsar gtr...

[gore]

pulsar, awesome quick reference. This should be made a sticky for sure

[pulsar gtr]

Actually, I save this diagram over a year ago, after I got it of this forum, I thought it comes handy one day and it did. can't remember who posted it back then though.

PULSAR GTR