Z32 maf wiring on a RB25DET?

[onefastrb26]

I am wiring a Z32 MAF on a early RB25DET, and I was wondering if that is the correct wiring:

wiring for Z32 Maf into GTS-T [ Post #8 ] Z32 terminals are lettered A Thru to F, total of six terminals of which 5 are used on the Z32 and 4 on the GTS-t. Working from A upwards as follows: A: do not useB: connect to Black wire on GTS-T MAF loom C: connect to black/silver D: connect to white E: connect to black with white tracer F: do not use.

Thanks in advance!

[onefastrb26]

My main concern is that the Z32 MAF wiring is like that:A - emptyB - signalC - chassis groundD - harness groundE - powerF - nothing

And on the RB25DET harness, I have Orange/Blue wire for Signal?

Thanks!

[eh?]

http://www.skylinesaustralia.c...69487

[fly240]

If you are using a z32 maf. don't you have to reprogram your ecu to run the z32 maf?...

[accel junky]

Just make sure to unplug your battery or you will short out your Power FC....oh wait...that was me...lol

[krayton]

If you are using a z32 maf. don't you have to reprogram your ecu to run the z32 maf?...

safc, power FC, aem, etc. some kind of management with that option can re-adjust for z32

[onefastrb26]

Thanks a lot guys!

This is the correct wiring. Colors did not match because whoever did the wiring, used like 6 different color wires to extend the maf wires.

A- nothingB- signal outC- chassis groundD - sensor groundE- 12V powerF - nothing

This S1 RB25DET was like thisA -B - orange/blueC- blackD- forgot ( I think it was blue/green)(check for yourself)E- black/white stripeF - nothing

[sickness14]

Wait... i think i figured it out...

Z32 MAF WIRING to RB Neo

White with Blue Trace - GroundOrange with Black Trace- SignalBlack with White Trace - 12v Power

A- -------B- SignalC- 12v Ground --- Wire togetherD- Signal Ground --- Wire togetherE- 12v PowerF- --------