z32 injectors in a rb20 26

[supersayianjim]

didnt know they were compatable(iam a late bloomer on some things). got spanked last night by a 4.6 cobra and iam going to to an aggressive bolt on campaign..



i have a rear main seal leak so iam going to have to pull the engine.. i had these z32tt(90-94) injectors laying around and come to find out they fit. i plan to run them and upgrading the turbo and fuel pump with tune will hopefully get me to the 300+hp door.



looking at a cx racing turbo

http://cgi.ebay.com/ebaymotors...AX:IT



or keeping it simple and changing out my cartridge(if it will work) getting this

http://www.conceptzperformance...0.125



and a act street clutch kit

http://cgi.ebay.com/ebaymotors...AX:IT



or just sourcing a rb25det oem unit.. don't want to go with external wastegate with this engine/car. kinda keep it low key..



and iam adding a whal fuel pump with a tune by carl h.



and comments suggestions

[Sil240]

OK a cx racing Turbo = FAIL & waste of $

Z32 Injectors stock are side feed. Unless they are larger than stock and you already have them not worth it. You would have to switch to a rb25 side feed rail. Just by some deatschwerks Injectors.

Best bet is to get a rb25 Turbo it bolts right on.

Also get that walboro pump and adjustable fuel pressure regulator

[HxC_Nismo]

OK a cx racing Turbo = FAIL & waste of $

Z32 Injectors stock are side feed. Unless they are larger than stock and you already have them not worth it. You would have to switch to a rb25 side feed rail. Just by some deatschwerks Injectors.

Best bet is to get a rb25 Turbo it bolts right on.

Also get that walboro pump and adjustable fuel pressure regulator

+1 rawbrokerage has the precision top feed injectors any size for around $500

[rb25det250sx]

agree with sil240 with everything but the Rb25 turbo. they are good for a MAX of 14lbs unless you want it to explode. and your not getting to 300hp on that. i would recomend a turbonetics T3-super 60. would be perfect for what you want and they are relatively cheap.

[wrgibson]

Isn't a super 60 a bit small for a RB?

[rb25det250sx]

not for a Rb20, and if he only wants a little over 300hp...and you can get them in different trims, would be suitible for what he wants to do!