z32 brake pads

[240sx_in_209]

hey fokes.. well im going to be buying some brake pads for 300zx tt brakes but.... i looked here and it saids that the 300zxtt and the n/a are not the same... but when i look on the internet it saids its for all models for the tt and n/a. are they really the same or no because at this point im not sure

[anti_flag_army]

there were 2 different types of the z32 calipers, 26mm, and 30mm, the 26 came on the early n/a's then they all came with the 30mm, i think it was 91 someone correct me if im wrong please.

[240sx_in_209]

yeah i know that...... 89=90 were aluminum 26 mm and then after that 91 and up are 30 mm some iron and some aluminum..... but i just dont if the brake pads fit both? i read in someplace's that they do and some other parts of the web say they dont. so im not sure if they both use the same brake pad

[heartofaskyline]

i just went to orielys and got the best ones they had, that way if they dont fit i can bring them back and swap em out

[r3v_v3ng3]

its the same front brake pads. its the rotor that is different and it corresponds to the caliper 26mm=90 n/a only and 30mm= 90-96 turbo or non turbo

[240sx_in_209]

ok...... so it is the same pad.. thank you ok now that i think about it sounds right... the pad does not change just the rotor and caliper.. but the space between the rotor and caliper should be the same in both sound about right?

[r3v_v3ng3]

sounds right.

[240sx_in_209]

good...... i found a good deal on some too.........

[Black on Gold]

Hawk pads FTW!!

I'll be doing my swap tomorrow actually.

[240sx_in_209]

yeah all i need is the pads..... i about some axxis or what ever they called on ebay for like 16 bucks.... seen them for like alot more on other websites....

[r3v_v3ng3]

ebay is the ****z!!!

[240sx_in_209]

jup lol