Z31 Seat Question

[xX RB Xx]

My seats are absolutely crap. The leather is coming off and the seats have a bunch of rips in them with the foam fall out and as i was going over them yesterday i found a bunch of pine needles in the seat as a form of support..

My question is what cars (if any) have similar seat brackets as the the Z31?

[evildky]

just adapt the chosen seats to the Z31 tracks, shame is I just scrapped 3 good cloth Z31 seats, pulsars have great light seats, mr2s also have good lightweight seats, miata seats are popular for swapping into just about everything

[xX RB Xx]

See I have power seats and I would actually convert to manual. Now I'm pretty sure the brackets are the same as the power but could I use the power seat bracket with a miata manual seat per say?

I know that that is dumb but I have never looked at the seats mounting points.

[Kalypso]

get g35 seats for 500$ and you'll be a G.

anything can fit if you fab it right

[xX RB Xx]

Yeah I know that anything can fit in anything but like in the S chassis, all of seat brackets are the so all the seats are interchangable. That is what I'm trying to find a seat that is interchangable with my Z31 due to a lack of Z31 parts in my area.

[AZ-ZBum]

No one has found any that are a bolt in swap. But with a little patience, just about any seat can be made to work. Might be as simple as swapping frame rails. Might be a bit more difficult than that.

[bigred240sx]

it took me 8 hours to fab up my s30 rails to my seats. the seats are ebay seats out of a civic haha. but i was learning to do it. simple fab work is all that it would take to do it.

[blackice280zx]

I have a set of tan leather z32 seats if you want them they are power and if you come to louisville you can have them free. They are just in the way

[xX RB Xx]

I just might have to do that. We don't have alot of parts down here and i am going to need something sooner than later

[blackice280zx]

also try s13 and s14 seats (240sx) I think they are very similar for mounting. Last time I was down that way pull a part was full of them in Nashville of course

[xX RB Xx]

Your about 5 1/2 hours and 375 miles. It's going to be about $80 in gas, I Bet I could get them shipped for that much.

[blackice280zx]

how much will it cost you to get to bowlinggreen if you want them. I will be there not this weekend but the next

[xX RB Xx]

It would help but the only problem is that I work on the weekends

[blackice280zx]

give me a call we can work something out 502-817-7749

[xX RB Xx]

I'll give you a call later tonight. I'm at work right mow

[apexbuddha]

Not to dredge up an old topic, but this came up via a Google search and I have to ask if anything is different in terms of the seat rails if I have a full-power seat that I want to replace. I get it, there'll be wiring to disconnect and such, but the seat is fairly beat and I'd like to eventually get something more supportive in there because I'm in it for easily 2 hours a day.

[evildky]

seat rails are the same form 84-89, the seatbelts and power wiring changed

[apexbuddha]

Okay, so at least that's consistent and I have that working for me. Cool, thanks!