Great to hear! What did it end up being?
Now you just need to figure out which cylinder is down and why. If you messed with the CAS, make sure it's in time.
Z31 Nissan won't start
-
Ken@PTUNING
- Posts: 99
- Joined: Thu Dec 24, 2015 5:29 pm
- Car: '92 Nissan 240sx KA-T
- Location: Manassas, VA
- Contact:
-
Kym rhodes
- Posts: 22
- Joined: Mon Dec 28, 2015 7:11 pm
- Car: 1985 Nissan 300zx turbo (z31)
- Location: Australia
Re: Z31 Nissan won't start
Thanks you soo much!!!
It turned out to be the CAS... There was a loose wire soldered dodgy
The car runs fine now and runs on about 2-3 pound of boost!
It turned out to be the CAS... There was a loose wire soldered dodgy
The car runs fine now and runs on about 2-3 pound of boost!
-
Ken@PTUNING
- Posts: 99
- Joined: Thu Dec 24, 2015 5:29 pm
- Car: '92 Nissan 240sx KA-T
- Location: Manassas, VA
- Contact:
Re: Z31 Nissan won't start
Glad to hear it!
We had the same thing happen at the shop. Z31 came in and wouldn't start at all. Spent a few hours testing various things only to find out the signal wire for crank position on the CAS was broken. Fixed it and it fired right up! The wiring in these cars is so old that it's really not uncommon (hence why I kept staying to check the wiring).
We had the same thing happen at the shop. Z31 came in and wouldn't start at all. Spent a few hours testing various things only to find out the signal wire for crank position on the CAS was broken. Fixed it and it fired right up! The wiring in these cars is so old that it's really not uncommon (hence why I kept staying to check the wiring).
-
Kym rhodes
- Posts: 22
- Joined: Mon Dec 28, 2015 7:11 pm
- Car: 1985 Nissan 300zx turbo (z31)
- Location: Australia
Re: Z31 Nissan won't start
Yea thank you soo much!!!, the wire was soldered randomly there no heat shrink or anything, and must have broke off when we where driving it