Z31 Needs Help!!!!!!!!!!!

[Nissman]

Ok so to get right to the point i did a rebuild on my 1984 300ZX, well having stored a majority of the info in my head(always worked before) i came to a point where i had a complete brain fart and forgot which wires go where for the injectors.

So any Z31 owner please help me, i need to know which side of the harness goes in front.

The harness has three wires,

the middle is wraped with a shrink wrap style rubberthe other(front or rear) is wrapped in a larger style rubber with TWO GRAY BANDS on it.the other(front or rear) is wrapped with your standard wiring slip on shield(hard plastic ribbed rubber...no laughing).

So basically i need to know if the front has the gray bands on it or if the back has the gray bands on it.

[Syntax360]

the wires should be different lengths. the shortest wire/plug goes to the rear-most cylinder on its side and the longest wire goes to the front. that just leaves one :-) if u take a pic of holding that part of the harness out, i could help a little more, but that shouldn't be necessary. good luck :-)