your thoughts on this two turbos: z31 or ct26 from an mk3 supra

[joe240]

Which one of this two turbos would would perform better on the ka24de. Im putting a low budget turbo intercooled kit on my car and i would like to know if any of you guys out there would know.

Will the t3 from the z31 be bigger or smaller than the mk3 ct26 supras?:) Thank you for your help!

[Checkered-Member]

How much PSI are you planning to run?Do you want more low end or top end?

[joe240]

14psi max boost with a greddy e-manage and a z32 maf with 480cc injectors

[cosmo]

I'd pick the Z31 because it's a T3 flange, which allows the miilions of T3/T4 upgrades to work on the same mani/flange, unless you feel like getting a new mani. when you want to upgrade.

Unless the CT26 is also a T3 flange, then I guess it's a toss up

[WDRacing]

I've seen better results with the T3 from the Z31 on alot of RB25's. Not to many people swap install the CT26, although it's not a bad turbo. I had one pushing 20 psi on a 3SGTE MR2. But thats a 2.0. I'd go with the Z31.

WD

[trpower7]

CT26 = bain of my existence. Stupid MKIII supra............