Yey for Racingline customer service :)

All things Altima Coupe.
User avatar
Marisha
Posts: 1017
Joined: Wed Jun 11, 2008 4:14 am
Car: 2008 Altima Coupe 2.5S
Location: Germantown, MD

Post

Just wanted to share with you guys my good experience...

So I tend to procrastinate/overthink purchases way too much. When the free shipping offer from Racingline came around, I knew I wanted to pick up a strut tower brace. I finally got my butt in gear today; went on the site and was relieved to see the advertisements still in place. So I went to place the order but got a message saying the discount code had expired. I sent an email over to Racingline pretty much asking them what was up and (very promptly) found out that the offer did expire (today in fact) and they just haven't had the time to take down the ads, but...they extended the code until midnight tonight. Of course I placed my order after that

Thanks again Joe, you made my evening!

Oh and if there any other procrastinators around, you better get your act together


User avatar
Jose3.5
Posts: 1032
Joined: Fri Mar 21, 2008 5:04 am
Car: 2007 Nissan Altima SE 3.5

Post

You could have used 4GALTY for free shipping also but you should have asked him whats up with all our y pipes lol

User avatar
losenone
Posts: 737
Joined: Mon Jul 21, 2008 4:33 pm
Car: AC 3.5 CVT K12
Location: Long Island
Contact:

Post

I think Y-Pipe is a better question.

I placed my order for the strut bar like 2 weeks ago before they started the promo

User avatar
Marisha
Posts: 1017
Joined: Wed Jun 11, 2008 4:14 am
Car: 2008 Altima Coupe 2.5S
Location: Germantown, MD

Post

I've got a 2.5S, so the Y-Pipe doesn't apply to me

User avatar
Ricko
Posts: 909
Joined: Sun Apr 26, 2009 4:56 pm
Car: 2008 Altima Coupe
Location: San Diego
Contact:

Post

Marisha wrote:Just wanted to share with you guys my good experience...

So I tend to procrastinate/overthink purchases way too much. When the free shipping offer from Racingline came around, I knew I wanted to pick up a strut tower brace. I finally got my butt in gear today; went on the site and was relieved to see the advertisements still in place. So I went to place the order but got a message saying the discount code had expired. I sent an email over to Racingline pretty much asking them what was up and (very promptly) found out that the offer did expire (today in fact) and they just haven't had the time to take down the ads, but...they extended the code until midnight tonight. Of course I placed my order after that

Thanks again Joe, you made my evening!

Oh and if there any other procrastinators around, you better get your act together
Same exact experience. I did not receive an email back but I did later find that the code was working.

Where is the Rear Sway Bar??? (< 4 wks. away)

User avatar
headhunt3r
Posts: 867
Joined: Sun May 04, 2008 6:45 pm
Car: Altima Coupe 2.5S w/ CVT
Location: Vancouver BC

Post

I'm contemplating whether to get the strut bar or the SBD Grounding Kit... or anything at all after getting a speeding ticket (80 km/hr in a 50 zone) on the way to a job interview

User avatar
RaiderKID
Posts: 414
Joined: Wed Oct 29, 2008 9:32 am
Car: 2.5 Percision Grey Altima Coupe
Contact:

Post

to the OP will the bar interfere with your intake?... I have been wanting to get one but my two issues are which one to get, and if it will intefere with the K&N intake?.... glasd to hear the great service, hopefully it will still be on when i get around on buying mine

User avatar
Marisha
Posts: 1017
Joined: Wed Jun 11, 2008 4:14 am
Car: 2008 Altima Coupe 2.5S
Location: Germantown, MD

Post

From all accounts it should not interfere. I've seen a sedan with that setup have no problems. Hope there won't be any when I get it installed.

User avatar
Ricko
Posts: 909
Joined: Sun Apr 26, 2009 4:56 pm
Car: 2008 Altima Coupe
Location: San Diego
Contact:

Post

RaiderKID wrote:to the OP will the bar interfere with your intake?... I have been wanting to get one but my two issues are which one to get, and if it will intefere with the K&N intake?.... glasd to hear the great service, hopefully it will still be on when i get around on buying mine
There is a picture on the site of the bar in a car that has the K&N installed. Looks like plenty of clearance.

BlackNWhite
Posts: 1631
Joined: Thu Oct 04, 2007 8:30 pm
Car: 08 Altima Coupe

Post

Marisha wrote:So I tend to procrastinate/overthink purchases way too much. When the free shipping offer from Racingline came around, I knew I wanted to pick up a strut tower brace. I finally got my butt in gear today; went on the site and was relieved to see the advertisements still in place. So I went to place the order but got a message saying the discount code had expired. I sent an email over to Racingline pretty much asking them what was up and (very promptly) found out that the offer did expire (today in fact) and they just haven't had the time to take down the ads, but...they extended the code until midnight tonight. Of course I placed my order after that

Thanks again Joe, you made my evening!

Oh and if there any other procrastinators around, you better get your act together
Oh s***, oh s***, oh s***.

*Ordering right now*

I was gonna procrastinate until tomorrow!

BlackNWhite
Posts: 1631
Joined: Thu Oct 04, 2007 8:30 pm
Car: 08 Altima Coupe

Post

Looks like midnight was in the eastern time zone.

No strut bar for me.

BlackNWhite
Posts: 1631
Joined: Thu Oct 04, 2007 8:30 pm
Car: 08 Altima Coupe

Post

Jose3.5 wrote:You could have used 4GALTY for free shipping also but you should have asked him whats up with all our y pipes lol
I tried that, the coupon is tied specifically to the y-pipe.

If you have the y-pipe in your shopping cart, the whole order is shipped free. No y-pipe, no free shipping. x2.


User avatar
LongBeachCoupe
Posts: 9482
Joined: Thu Aug 23, 2007 1:43 pm
Car: 08 Altima Coupe (RIP Hurricane Sandy)
2005 Lexus RX

Post

headhunt3r wrote:I'm contemplating whether to get the strut bar or the SBD Grounding Kit... or anything at all after getting a speeding ticket (80 km/hr in a 50 zone) on the way to a job interview
I think its an easy choice, the strut bar, but the SBD kit will pay for itself over time...

User avatar
losenone
Posts: 737
Joined: Mon Jul 21, 2008 4:33 pm
Car: AC 3.5 CVT K12
Location: Long Island
Contact:

Post

Marisha wrote:From all accounts it should not interfere. I've seen a sedan with that setup have no problems. Hope there won't be any when I get it installed.
I will let you know when it comes to my door tomorrow

User avatar
bravey_z12
Posts: 373
Joined: Sun Jan 27, 2008 1:40 pm
Car: 2.5 6spds A/C [azure blue]

Post

ya me too but i sent bunch of mails about that coupon and i got my R-endlinks and STS with freeship ,they really take good care i feel u marisha, i got them just in time

User avatar
losenone
Posts: 737
Joined: Mon Jul 21, 2008 4:33 pm
Car: AC 3.5 CVT K12
Location: Long Island
Contact:

Post

Bar was super easy to put in, took me 10 mins and a 13mm socket. I can absolutely feel the difference already!

User avatar
RaiderKID
Posts: 414
Joined: Wed Oct 29, 2008 9:32 am
Car: 2.5 Percision Grey Altima Coupe
Contact:

Post

pics????

User avatar
Ricko
Posts: 909
Joined: Sun Apr 26, 2009 4:56 pm
Car: 2008 Altima Coupe
Location: San Diego
Contact:

Post

strut bar is on back order! I ordered 4 days ago an emailed Joe. They ran out of strut bars with the sale and they will have more made in about 8 days.

User avatar
losenone
Posts: 737
Joined: Mon Jul 21, 2008 4:33 pm
Car: AC 3.5 CVT K12
Location: Long Island
Contact:

Post

RaiderKID wrote:pics????
Its been raining all week here, ill see if i can get out today and tomorrow and get some taken.


Modified by losenone at 1:14 PM 6/20/2009

User avatar
maxentropy
Posts: 1755
Joined: Fri Oct 12, 2007 7:25 am
Car: '08 Altima Coupe 3.5SE
Location: Collegeville, PA
Contact:

Post

losenone wrote:
What are you painting your engine cover?

User avatar
losenone
Posts: 737
Joined: Mon Jul 21, 2008 4:33 pm
Car: AC 3.5 CVT K12
Location: Long Island
Contact:

Post

maxentropy wrote:What are you painting your engine cover?
I just left it off.

User avatar
Marisha
Posts: 1017
Joined: Wed Jun 11, 2008 4:14 am
Car: 2008 Altima Coupe 2.5S
Location: Germantown, MD

Post

Ricko wrote:strut bar is on back order! I ordered 4 days ago an emailed Joe. They ran out of strut bars with the sale and they will have more made in about 8 days.
That would explain why I haven't gotten a shipping notification. Good thing I'm in no hurry to do this mod and can wait


Return to “Altima Coupe (2008-2013)”