Yet another 240 with a RB26.....

[RBMonster]

Let the games begin........









Off to the machine shop.........

Modified by RBMonster at 6:23 PM 5/20/2006

Modified by RBMonster at 5:24 PM 8/31/2006
Modified by RBMonster at 5:49 PM 8/31/2006

[SeVa-S13]

You better watch it man, I think some chick is trying to karate chop your turbos.

[Nick240sx]

where did u pick that up ?

[Valley]

lookin' good

You better watch it man, I think some chick is trying to karate chop your turbos.

wify... or rbmonster?

[Kansei240sx]

I like the head and everything attached to it, and the HKS center plate is friggin worthy of winning 10 internets.

[OKRB20DET]

cool! the pix dont show up.....

[Joe]

cool! the pix dont show up.....

they work for everyone else.

[teddy]

i think the girl made off with your pistons when you weren't looking

[RBMonster]

Wifey say "You no spend money." "Me use karate and chop your turbos!" (She is Japanese ya know........)

Modified by RBMonster at 7:03 PM 8/31/2006
Modified by RBMonster at 7:09 PM 8/31/2006

[NISMO_RB25]

LOL

Car-NissanEngine-JDM importGirlfriend- Japanese

alright all you need to do now is convert it to RHD and you when the JDM wanna be contest. LOL!

And your car is sweet. I would kill fo find such a nice one.

[Nick240sx]

very very nice

[Black on Gold]

loving the Valve Cover

[RB20DETodd]

lookin good, all these ****ers wish they could have a jdm girlfriend to go along with there wannabe jdmness, me included but i like brazilian chicks, i no more like the flat asses.

[NoHicas]

Nice setup, good to see you building it up first instead of just hurrying the project like most would do.

.... but i like brazilian chicks, i no more like the flat asses.

lol I'm with you there bro my exwife is Brazilian. Dating one now, guess I didn't learn my lesson! But damn they are so hottt.

[RB20DETodd]

Nice setup, good to see you building it up first instead of just hurrying the project like most would do.

lol I'm with you there bro my exwife is Brazilian. Dating one now, guess I didn't learn my lesson! But damn they are so hottt.

NICE, where could one find a Brazilian? perferably aids free, haha, you are a lucky man!

[takaramotors]

Sweet ride

[takaramotors]

the HKS center plate is friggin worthy of winning 10 internets.

lol

[linkmaster2021]

How much did this project set you back, man?I would like to get an idea of what im up against.How hard was it 1-10?

[Darius]

hahaha if you have to ask, you haven't done enough research on it. There's a few reasons why very few people have them installed and installed in such a professional way.

RBMonster - what size wheels, offsets and tires are you running? Also suspension? They fit so perfectly that I knocked the keyboard drawer off of my desk when I saw the last pic (if you know what I mean ).

[rbsileighty]

Looking good!

When's the estimated DOB for that 26'er?

[Florida240sx]

What is the estimated cost to make it fit. Cost about 1500-2000 to make it fit?or more?

[Dano]

Nice!!! More pics when you get more done!

Thanks for sharing!

-Dan

[RBMonster]

Just wanted tp update my post. There have been vast changes since my last post.........I'll answer questions as best as I can. As far as cost goes, it is a complete waste of money. Said and done.....I'll sink over $20k into a 240 errr RB26. I would tell anyone not to do this swap unless you like to light your cigars with $100 dollar bills. Granted you could hack a RB26 into anything.....but it won't be pretty. I could have just dropped the motor in and been done for 7-8k, but that's not for me The block/cylinder head will be finished the end of next week.....so more pics to come. Gonna have to wait 5 more weeks for my intake manifold....but that's the only major componet I don't have.

As far as my wheels go...they're work rezax. 18x9.5 in front and 18x10 in the rear. The offset police told me to keep the offsets secret but they are as flush as it gets. I changed coilovers recently so I'll snap more pics and post em up. Car should be complete around July 1. I still gotta find someone who knows RB's to get it tuned. Keep the comments coming!

[Florida240sx]

Where you live?

[takaramotors]

let us know we can tune her for you as well we carry a full line of rb parts you just need to call and ask

[RBMonster]

let us know we can tune her for you as well we carry a full line of rb parts you just need to call and ask

Familiar with Haltech? Cuz I haven't found anyone who wants to touch it. I've got a base map written for me by Haltech that should at least get the car started. I'm not going to boost it until it has a proper tune. I don't have a problem doing the fuel map myself, but I don't know enough about timing/RB series motors to do the job properly. If you really think you can help me out shoot me a e-mail. I just don't want someone who's been through EFI 101 tuning on my $20k project. I should be posting pics taken @ the machine shop next week. BTW I live in K-Town T.N..

[sean8564]

Here is what we would need from you a copy of your software this is make sure you have the current software and a list of upgrades you have done to the car as well. The is to get a few base maps down before you bring your car this will help cut the tuning time in half. I also need a idea of how much you want to put down to the wheels. please email me at [email protected] the base rate for tuning is 150 per hour. this includes dyno time as well.

[Darius]

Who are these "offset police" that you speak of? I will have to have a little discussion/bribery session with them to leak this info to me. OR you can e-mail me and I promise not to tell.

[RBMonster]

More Toys









More to come......


Modified by RBMonster at 8:30 AM 9/4/2006

[Carl H]

dear god...twin hks gt3037s's, rated at 480bhp apiece...thats like 960bhp potential.