Y34 Staggerd 20's... AMISTAD G

[ClutchKick]

Got these on for now...

Suspension is on the way... impatiently waiting even more now...

[auditech10]

Good quality wheel company but not feeling those on a Y34 at all. Not aggressive enough for me at least. Which suspension are you going to use? Ive got a really good connection for Insurance Group parts.Cheers

[ClutchKick]

I got them off a buddy... offset is not ideal for the M... but still pretty close... I may put some 10mm spacers on the front... I cant roll stock, most likely will run the JP wheels along with the kit...

Im going to end up with Air Runner... but for now, im bringing in some Tein S-Tech's... well see how those feel for now...

[auditech10]

It all depends on how you like it and your style. I will be on air early next year. I cant decide on kits yet but wheels are down to two styles just waiting on quotes still. What offsets are those? They look like 38 or so. Did you get the Stechs used? Oh your just using springs then right?Cheers

[ClutchKick]

I am a TEIN dealer... bringing over a couple of sets, hoping they will work... dont know of any in the states...

What wheels are you looking for quotes on...

20x8.5 +3420x9.5 +35

could be more around mid / low 20's for my tastes for my ultimate goal...

[vzuptnguyen]

NEGATIVE CAMBER, HERE WE COME!!! =]

[auditech10]

negative camber for what fitment? with those offsets it wouldnt look good at all.

[Teknic73]

Keep us posted about the Teins! off of what car are you trying to make them work?

[ClutchKick]

TEIN S-Tech's are avaialble in japan only for Y34 Gloria / Cedric...

Special order item from TEIN...

[auditech10]

There are about 15 companies that make springs for our cars but people have to remember that the spring rates are not the same as ours with the V8s. Most I have seen have spring rates that are just over half of what ours come with, and that needs to be taken into consideration before purchasing them.

[ClutchKick]

There are about 15 companies that make springs for our cars but people have to remember that the spring rates are not the same as ours with the V8s. Most I have seen have spring rates that are just over half of what ours come with, and that needs to be taken into consideration before purchasing them.

which is why I am seeing if they are going to work...

as a dealer, i can take these wrisks....

would be nice to beable to offer more stuff for this car... which is my goal...

sheeesh....

[auditech10]

Oh no, dont get me wrong I will be doing the same thing. BUT the buyers need to be aware of the possible extra risk of using them. Possibly there could be a safety risk involved. As a seller of any product one needs to cover their *** in every possible area.Cheers

[ClutchKick]

all true,, which is why I am going to be first testing them on my vehicle before offering them to anyone else...

[Teknic73]

so when do you plan on getting them?

[Chi-town M45]

Looks sweet dude!

[ClutchKick]

so when do you plan on getting them?

It takes me 3-4 weeks to get special order TEIN... so, should be another two weeks at most I hope!

(I ordered a few other sets just incase they work

[cremecreme]

sweet.... they kinda look like mercedes wheels...but good luck with the Tein

[AZhitman]

Man, that car just SWALLOWS a 20" wheel like it's nothing...

Still looks good to me.

[ClutchKick]

Thanks...

I need spacers up front... hehe...

The rear rubs when I have weight in the car over dips... no big deal, planning on rolling / pulling my fenders, just havent gotten around to it...

This car craves to be lower...

[auditech10]

nothing that a few degrees of neg camber wont take care of

[ClutchKick]

it barely rubs... either way... the next set of wheels I get are going to be flush fitment like on my s14... my m will sit like it eventually.. its my goal...

[Teknic73]

(I ordered a few other sets just incase they work

i'm in the 818, HOLLA!

it barely rubs... either way... the next set of wheels I get are going to be flush fitment like on my s14... my m will sit like it eventually.. its my goal...

what offset are you running on the rear of your s14? and did u pull the wheels off the M in that pic or was that taken b4 you got the Amistads?

why i ask is because I owuld like to take your stocks of your hands

[ClutchKick]

i'm in the 818, HOLLA!

what offset are you running on the rear of your s14? and did u pull the wheels off the M in that pic or was that taken b4 you got the Amistads?

why i ask is because I owuld like to take your stocks of your hands

That picture was taken before I got the amistads on...

The stockers ARE for sale with Pilot Sport tires with 80-90% tread...

The offsets on the AME's on the S14 are 18x9 +22 / 18x10 +17

But those wheels are going away soon

Drop me an email about the stockers... [email protected]

[paperfootball]

Any update on the suspension?

[ClutchKick]

still waiting... takes a few weeks to come in...

Although, I do have ship confirmations on my clear LED Gloria tail lamps, emblems, grilles, and other bits and pieces...

Yesterday, I did have to pickup som Rotors since I was short on drivers... I had 10 sets of Brembo rotors loaded in my M. The car looks much meaner lowered that inch or so from the weight...

[CakeDaddy]

still waiting... takes a few weeks to come in...

Although, I do have ship confirmations on my clear LED Gloria tail lamps, emblems, grilles, and other bits and pieces...

Yesterday, I did have to pickup som Rotors since I was short on drivers... I had 10 sets of Brembo rotors loaded in my M. The car looks much meaner lowered that inch or so from the weight...

someone is about to up stage us ! LOL You got big plans my man, I dig it.

As for the current rims on your M; The rims are unique and are in another class, but for the many years I've been putting rims on my cars I've learned that the rims shouldn't over shadow the car and steal the looks. Those rims are fresh and are very aggressive to the point where I don't see the car. All I see are the rims. As sexy as the M is, you need a rim that will compliment the car. I can't wait to see what's next for your car.

I see these guys here in Albuqueque ridding Chrystler 300's around on these gorilla pimp lexani style wheels and I say, "damn" but, to each his own, especially when it comes to those Chrystler 300 cars.

Modified by CakeDaddy at 11:00 AM 6/29/2007
Modified by CakeDaddy at 11:03 AM 6/29/2007

[ClutchKick]

someone is about to up stage us ! LOL You got big plans my man, I dig it.

As for the current rims on your M; The rims are unique and are in another class, but for the many years I've been putting rims on my cars I've learned that the rims shouldn't over shadow the car and steal the looks. Those rims are fresh and are very aggressive to the point where I don't see the car. All I see are the rims. As sexy as M is, you need a rim that will compliment the car. I can't wait to see what's next for your car.

Modified by CakeDaddy at 11:00 AM 6/29/2007

Thanks!

I do go back and forth with my feelings on the rims... One day, I like them, the next day, eh...

Well see... Its a very hard car to pick wheels for...

I do have alot of plans for my car, but also for the US market for this car in general... All of the parts I am bringing over I am planning to stock...

My window visors should be here FIIIIINIALLY early next week

[CakeDaddy]

sheeeiiittt!! you do have a lot of plans. visors, rotors, clear LED Gloria tail lamps, emblems, grilles, etc... that pretty big. plus, you got suspensions plans too, right?

and, you are correct when you say, "Its a very hard car to pick wheels for..." I struggled for a while. I wanted the MHT shifter, then the MHT LLC, and finally went with foose "speedsters" I even looked at those konig wheels with the changable spoke templates, I also looked at black rims, but my girlfriend said, "no" glad she did
Modified by CakeDaddy at 11:32 AM 6/29/2007

[ClutchKick]

oh the rotors... I was just picking up for my shops stock... my parts driver wasnt able to pick them up, so I loaded 12 pairs of rotors into my M...

Ill probably put some slotted rotors and less dusty pad on when the time comes though...