wth is wrong with it?

Discuss the RB20, RB25 and RB26 series engines.
Amad18
Posts: 43
Joined: Sat Oct 01, 2005 9:33 am
Car: 2004 Xterra

Post

wth is wrong with my car...ok i have a 1990 240rb20det and when i first got the car which was like almost a month ago now...it would mess up sometimes by not letting me rev over 2500 rpms and the idle would fluxuate from 1000-2000 rpms...soo i cleaned my MAF sensor...it worked for like 2-3 weeks...now its doing the same thing again...im pretty pissed...is it the MAF sensor or is it something else..if it is the MAF sensor should i replace it? and what MAF sensor should i put in if i do need a new MAF..thanks for the help peace.....


rb20det_pwr
Posts: 226
Joined: Tue Oct 11, 2005 1:29 am
Car: skyline hcr32

Post

did you try cleaning it again? you could replace it if you have one available to you, or if any body you know has rb20det borrow theirs and put it in before you buy one and find out yours is fine. but i *believe* it is a common problem with the rb20 MAF.

Amad18
Posts: 43
Joined: Sat Oct 01, 2005 9:33 am
Car: 2004 Xterra

Post

hmmm...i was gonan try and clean it again tomm morning...but i dunno anyone around here with a rb20 or even a 240 lol..pretty uncommen around here...and i just got here..but is there any other MAF that would work well on a rb20det...

rb20det_pwr
Posts: 226
Joined: Tue Oct 11, 2005 1:29 am
Car: skyline hcr32

Post

ic ic...i know a z32 bolts right in, and i *think* a Q45 does too.. or another rb one..

Amad18
Posts: 43
Joined: Sat Oct 01, 2005 9:33 am
Car: 2004 Xterra

Post

cool..well i just cleaned it and it wasnt too bad...cuz i cleaned it a few weeks ago...but when i took her out there was no problem...i hope it stays that way...i also checked my codes...they came up good...i reset my ecu...the codes still came up good...soo i dont know what else the problem can be if its not my MAF..but thanks for the info

User avatar
Carl H
Posts: 5985
Joined: Mon Aug 04, 2003 4:09 am
Car: 1995 Nissan 240SX SE RB30DET

Post

sounds like either a dodgy ECT sensor or some shoddy maf wiring.how did you extend the maf? butt connectors or soldering?


Return to “RB20DET / RB25DET / RB26DETT Forum”