Wtf, don't tell me I ordered the wrong part..

[Brent.S13]

Recently I ordered a set of egr block off plates for my ka (Seeing as I was missing 90% of it anyway I figured just block it off seeing as we don't have a smog test here) anyway the first one went on fine, but the other one is not fitting and will only allow one bolt to be bolted up to it. I put one in there and tightened it down really hard to where it wouldn't budge, but I'm still skeptical about it. (It's the one that only requires two bolts, not three. Sorry I can't describe it any better, still trying to figure stuff out...lol.) Anyway, can anyone help me out on the situation? Probably did order the wrong one but it did say for 91-94 240sx so yeah, lol.

http://images.marketplaceadvisor.channe ... 7/nbop.jpg

(That's the one that's not fitting, this is not where I ordered it though, just a quick picture to show which one it is.)

[PEZi]

if you plan on keeping the car that way.... and from how you described it, it seems that its flush correct? simply take it off make a seal with JB WELD like you would a gasket

[breadbox]

If you didnt RTV it, I would.

[RustspecS13]

Thats for a sohc KA, 89-90. They are mixed up.

I would just pick up a drill and make one your self.

~Alex

[Razi]

I made mine out of a piece of aluminum and sprayed copper gasket maker on both sides to seal it up.


Mine blocked off the 3 bolt side, looks like yours bolts onto the 2 bolted side.
Spray copper gasket maker or something and it should be fine.

[PEZi]

i made mine from aluminum too..... a red bull can

[Razi]

LOL.
No wonder your car is so fast.