WTB RB25DET Manual Trans

Discuss the RB20, RB25 and RB26 series engines.
User avatar
HxC_Nismo
Posts: 1036
Joined: Sat Sep 23, 2006 10:26 am
Car: '98 Nissan 240SX SE R33 RB26DET
'07 Nissan Titan SE
'05 Toyota Corolla
Location: Missouri
Contact:

Post

I broke mine and i need to get my 240 back on the road asap so if you have one let me know you can email me at [email protected] or post. but i need one asap for a reasonable price, let me know mileage and post a pic if possible. thanks


User avatar
HxC_Nismo
Posts: 1036
Joined: Sat Sep 23, 2006 10:26 am
Car: '98 Nissan 240SX SE R33 RB26DET
'07 Nissan Titan SE
'05 Toyota Corolla
Location: Missouri
Contact:

Post

nevermind i think my preasure plate is broken because my slave operates and i cant get into any gear and when i put it into gear with the engine off and try to start it with the clutch pedal down so its in neutral and the car moves like im trying to start it in gear. so im going to check for sure this weekend and uprgrade to the nismo slave cyl. and nismo strong release pivot ball wich is 30% stronger then stock. and replace the preasure plate if it is broken.

User avatar
Shocker
Posts: 2082
Joined: Sun Aug 01, 2004 2:40 pm
Car: 89 240sxHB rb26/30

Post

your clutch adjusted properly? and is your slave bled properly as well? OEM clutch if so.. get a ****ing 6 puck in there either, ACT or spec stg 3. Your slave should be fine unless your running a HUGE clutch.

User avatar
HxC_Nismo
Posts: 1036
Joined: Sat Sep 23, 2006 10:26 am
Car: '98 Nissan 240SX SE R33 RB26DET
'07 Nissan Titan SE
'05 Toyota Corolla
Location: Missouri
Contact:

Post

i have a spec stg 3+ on there and i dont run the bleeder box i just have a stainless braided clutch line and the slave that came with the transmission.


Return to “RB20DET / RB25DET / RB26DETT Forum”