WTB Eibach Springs for 1995 Q45

[jamesmost]

help me Eibach discontinued themplease help

[Q45tech]

Almost say good riddence, as they cause more severe camber problems than they helped in handling impovements. The rear progressives were the main problem..........sudden snap over steer in severe maneuvers in rain or snow/ice as the rears got stiffer and stiffer and stiffer as the body tried to roll. The rear center of gravity is high because of gas tank so the 0.8" drop doesn't help as much as the 1.0" front drop with lower basic CG.

Check with various sponsors and Nopi/Stillen, they may still have them somewhere in inventory. Many were used in active conversions.

[jamesmost]

just found them on e-bay, my rear is lowered about 1.75" now w/ a 25 sway bar. these will actually raise the rear from its present statei never heard of that problem occuring though

[jamesmost]

could u explain the problem issue more

[elwesso]

Joe probably has some......

[jamesmost]

joe got none i think i found one of the last sets floating around i called approx 50 -90 companies until i found them in someones dead stock

[PalmerWMD]

Tried SouthWestAutowerks yet?

[Q45denver]

I have a set I'd like to remove from my 1990 and put the stock springs back in.

[jamesmost]

no one has them, i found a couple of sets via e-bay if anyone interested lmk

denver why do u want to remove them??

[PoorManQ45]

Try searching google. use "Eibach" and "Q45. that should give you plenty of websites to choose from

Here are a few sites:http://www.bizrate.com/buy/non....htmlh ... fmCheapest Price http://www.hopupracing.com/eiprq4597.html

What suspension parts from the 300zx will work/fit the Q45?300zx Suspension parts linksThis site has coilovers, will they fit the Q45? http://www.hopupracing.com/suspension1.html

what do you guys think of these wheels? http://www.hopupracing.com/nilmwh.html

[Q45denver]

no one has them, i found a couple of sets via e-bay if anyone interested lmk

denver why do u want to remove them??

Too low to the ground and too stiff.

[911/Q45]

If you replace the spring seat and rebound stop rubber, it won't be so low and will ride better. Fresh upper links help too. All small money parts except the links.

[Q45denver]

Actually, I did that as well as new Tokicos when I installed the springs. It is just low enough so I can't get my floor jack under it. I do like the handling however.

[DAEDALUS]

LOL Keep the springs and get a lower floor jack. I assume you have at least 3" clearance.

[911/Q45]

Or jack the rear first, then the front. That's what I do.

[PoorManQ45]

Have you had any luck finding them yet? All those links that I posted said that they had Eibach springs in stock.

[jamesmost]

thank you for trying to helpif you read the thread u will see i found the springs for $150 plus shippingthe person i got them from may have a few more sets i also found a set for $250 plus shipthus if anyone wants a set befor they are gone because they r no longer in production lmk and i will point u in the correct directionjames