My wife decided to hook up the jumper cables wrong on the van and left them on until the rubber actually melted off them!!
Luckily I was able to resurrect the van by going through all the fuses and replacing the one for the main electronics, 15A.
Now everything seems to work except the oem radio. It won't turn on, shows no signs of life. All the other driver information center buttons and readouts work, it's just the radio.
Hoping there's some sort of fuse or relay I'm missing?
Wrong jumper cable hookup = fried radio!
-
michelangelo
- Posts: 23
- Joined: Fri Sep 16, 2011 7:45 am
-
nissangirl74
- Moderator
- Posts: 14381
- Joined: Sat Jan 17, 2009 1:15 pm
- Car: 2014 Xterra Pro4X, '12 Titan 4x4, '98 240sx, '89 Pao, '77 620, '72 240Z w/RB25, '68 510, '67 WRL411, '67.5 SPL 311, '63 Bluebird, '63 NL320
Re: Wrong jumper cable hookup = fried radio!
What year?
-
michelangelo
- Posts: 23
- Joined: Fri Sep 16, 2011 7:45 am
-
nissangirl74
- Moderator
- Posts: 14381
- Joined: Sat Jan 17, 2009 1:15 pm
- Car: 2014 Xterra Pro4X, '12 Titan 4x4, '98 240sx, '89 Pao, '77 620, '72 240Z w/RB25, '68 510, '67 WRL411, '67.5 SPL 311, '63 Bluebird, '63 NL320
Re: Wrong jumper cable hookup = fried radio!
Here's the link to the FSM. http://www.nicoclub.com/FSM/quest/2004_Quest/
Here's the index page for quicker searching. http://www.nicoclub.com/FSM/quest/2004_Quest/idx.pdf
Hopefully the diagrams within will help you find what you are looking for. Good luck!
Here's the index page for quicker searching. http://www.nicoclub.com/FSM/quest/2004_Quest/idx.pdf
Hopefully the diagrams within will help you find what you are looking for. Good luck!
Find Your Forum!