Wring questions

[grubby27777]

i need to know what each color wire is on the fuel pump and also the windshield wiper motor, the diagrams are kinda confusing

[Hijacker]

They're not confusing. You just haven't been taught how to read them properly.

Fuel pumptop1 2 34 5 6

1 - Black: Ground3 - Black/Yellow: pump power4 - unused5 - Black/Blue: gauge signal6 - Black: Ground

Wiper MotorTop1 2 34 5 6

1 - Light Green/Black - High signal2 - Light Green/Red - Low Signal3 - unused4 - Black - Ground5 - Orange - Incoming intermittent signal (best guess. I'm too lazy to go look up the wiper portion of the TCU for you)6 - Light Green - Incoming 12v Power

[grubby27777]

awsome thanks man, so if i wanted to run the wiper without the stock switch: power and ground are constent then i need to run power to eather the high or low signal?? Im building a new chassis harness and trying to work out all the details

[grubby27777]

i need the pin out for the f4 and m60 plug, its the plug right after the ecu that connects to the chassis harness, and i also need the pinout for f27 and f111 they are the injector harness plugs, its a s14 sr Btw thanks again

[zachattack_5491]

Sorry, don't mean to tread jack here but you should let me know how that works out for you (building a chassis harness). The wiring in my ENTIRE car is completely screwed. Engine harness is as good as it's gonna get, but inside the car is just horrible... I don't even know where to start. Let me know.

[grubby27777]

so far its been cake there are afew bugs im workin on but its simple and clean, when im done ill post pics, anybody able to help me out on my questions???

[grubby27777]

anyone??