would i need to set my timing again?

Post by **blues14** » Sat Jul 30, 2005 3:21 pm

I recently converted my auto rb20det to a 5-speed. I was running the auto ecu and had the timing set to 15 degrees and the car ran fine. I just bought an actuall 5 speed ecu and the car drives better and smoother at under 4k rpm, but the car is a dog above 5k rpm. do i need to have my timing reset? or is the auto swap thing probably causing an error with the 5 speed ecu? would i be better off just sticking with the auto ecu?

Post by **NISTECH** » Sun Jul 31, 2005 5:35 am

No you do not need to reset timing, check for codes in the ecu.

Post by **blues14** » Mon Aug 01, 2005 2:17 pm

Code 55- everything ok.

does the mt ecu need to run more advanced..say around 20 degrees? how much would i turn the CAS to advance 5 degrees?

would i need to set my timing again?

would i need to set my timing again?

Re: (NISTECH)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums