WORST SR20 EXPERIENCE!!!! IN DIER NEED OF HELP!!!

[Kouki 180SX]

Well to start i bought a S13 Blacktop SR20 swapped 1990 hatch. 2 hours later I go drive it to a friends house to show off. I give them a ride in it and push the SR to about 6000 RPMS. Then i throw it in neutral and it turns off. I drive it a couple more times but everytime I put it into neutral it turns off. So then im like oh s*** I better get home. Then on the way home the motor starts making a knocking noise. So I pull over and pop the hood to see my SR shaking and knocking pretty hard. So I go home empty out the oil and find no metal in it. I think it might be a bent valve. I could really use some help on what happened to the motor and what to do now.Thanks,

[Blown240sx]

If the oil pans off check the rods and mains. If you caught it early enough its an easy fix. Spinning rod bears on SRs is a common thing. Just pop the caps off the rods and mains and look for any wear signs. A bent valve would cause a compression loss and miss but not a knock. Maybe a ticking sound with the valves.

[Koshin]

not nearly the worst SR experience....I was expecting much much worse