Post by
moneymike »
https://forums.nicoclub.com/moneymike-u149546.html
Tue May 11, 2010 7:09 pm
hey guys
as most of you know i turbo charged my d21
as of yesterday i put a safc in it to pull fuel and tune it with
before i put the safc in the car it ran really rich but it ran and everything was ok. after i wired up the safc the car wont start it will crank and crank for days on but wont start i had a few friends comes check it out to see if they knew. but still nothing i undid all the wiring from the safc and put everything back to the way it was before i touched anything. and still the same things it cranks but wont start. so i rewired the safc and gave it another shot and went through everything to check if i missed anything and it still wont start. i ran the codes on it and the only code that came back was 41 which is the iat sensor which i have disconnected for the time being but it ran fine with out that so i erased the memory and still the car would not start. we tried to push start it and still nothing. the battery is good has a strong crank it but the car just wont start. im going to go out and check it one last time again tomorrow and if i cant get it to start ima take it to the shop and see whats up.
so if anyone has any ideas or knows whats happening let me know asap
and btw i just changed the head gasket the day before all this and the car ran fine and i didnt push it or anything