Wiring prob i think.

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
scottsnissan
Posts: 393
Joined: Wed Sep 15, 2004 1:06 pm
Car: 1995 240 sx se
Contact:

Post

91 240sx sr20det s13blacktopI had jus got the car from someone.Noticed the fan wasent tied into a switch or anything jus grounded to the Top of the head in front on valve cover and one wire sitting near battery.So i lookied it over and tried to connect the wire near the battery and noticed that the fan didnt work.Bumer bad fan.Pulled out the fan and said what the hell try again and ran ground on terminal and hot on treminal and fan worked.So i placed it back in the car.Ran the wires like they were before.Well i noticed a clicking sound in the car comming from the dash so lookied and all my lighst were flickering.So i disconected it and tried post to post and fan worked.

Maybe this is why i get these probs listed here zer...didnt want to double post


User avatar
SpeedRacer1
Posts: 3144
Joined: Fri Jul 26, 2002 7:44 pm
Car: 1990 240SX, G35

Post

Fans need to be wired up to relays to work properly.

scottsnissan
Posts: 393
Joined: Wed Sep 15, 2004 1:06 pm
Car: 1995 240 sx se
Contact:

Post

I know they have to be wired liek that but what i was getting at is that there is something wrong here and like i said i didnt install motor so i have no clue what to look for .Rem when i use that as ground my Gauge lights come on ,Like oil Seatblet and the other without the key on.

scottsnissan
Posts: 393
Joined: Wed Sep 15, 2004 1:06 pm
Car: 1995 240 sx se
Contact:

Post

bump


Return to “SR20DET Forum (rear-drive)”