wiring iac/aac valve on rb20 s13 swap?

[Gavin Johnson]

anyone wired it before? i need to do mine, car keeps dieing when i come to a stop. anyone thats done it and has a schematic?

[Gavin Johnson]

bump

[Gavin Johnson]

anyone? just wondering if ones power and ones ground, or if ones ign and then a signal??

[Gavin Johnson]

anyone at all? carl h, coolwhip?? you guys know everything!

[Booztd 3]

Pin 4 on the ECU goes to the black wire on the IAC valve, the other wire on the IAC goes to 12V (when ignition is on)

[Gavin Johnson]

awesome thanks man! appreciate it alot!!!

[Gavin Johnson]

just a heads up... i think you got it backwards... am i right?

[Booztd 3]

just a heads up... i think you got it backwards... am i right?

Could be, I havent looked at the car in probably 5 months, and its in storage across town, plus mine is an RB26 so im not sure if the colors differ.

[Gavin Johnson]

ok, its just on an rb 20 (not sure about others) black with red stripe is ignition power for the ecu and the blue with green stripe on the plug is the same color as pin 4 on the ecu. so i hooked it up this way and it seems to work.