wiring harness corrosion

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
J240sx
Posts: 437
Joined: Fri May 12, 2006 7:03 pm
Car: 89 240sx

Post





So about 6 of the plugs on my harness for my red top are corroded. Should i get some corrosion cleaner, try and use the harness still, or just by another harness for $250? The plugs are bad but I can still barely see that a plug would be able to fit inside. I was also worried that if i used some corrosion cleaner that the inside of the plug would just fall apart.



User avatar
SpeedRacer1
Posts: 3144
Joined: Fri Jul 26, 2002 7:44 pm
Car: 1990 240SX, G35

Post

First figure out what the plugs are then decide whether they are even necessary.

User avatar
J240sx
Posts: 437
Joined: Fri May 12, 2006 7:03 pm
Car: 89 240sx

Post

Alright, i figured out 3 are for the windshield washer. Im still trying to figure out the other 3, is there a site that points out what each plug on the harness is for?

User avatar
SpeedRacer1
Posts: 3144
Joined: Fri Jul 26, 2002 7:44 pm
Car: 1990 240SX, G35

Post

Take good photos or give the wire colors.

User avatar
homeslicej2
Posts: 5446
Joined: Mon Jan 15, 2007 5:46 pm
Car: 1990 Nissan 240SX S13 SR'd hatch

Post

SpeedRacer1 wrote:Take good photos or give the wire colors.


Return to “SR20DET Forum (rear-drive)”