Will ka 550 injectors drop in Sr's

[supreamS14]

I found some used Deatschwerks 550CC side feed Injectors from a Ka24de for $200, and wanted to know if they drop right in, harnes clips fit the same and if the Independence is the same? High, low, IDK? Can some one help me out

[nzmoman]

yes they should work, but be careful about the brand because there are some crappy injectors out there. Also this is a pretty easy topic to find information on so you should try to run an injector search before you buy them. soak up as much info as you can.

[supreamS14]

I did search ALOT! They redrill out stock cores bigger which I dont like but they flow test and check EVERY injector and send you a flow chart un like most company's that just make them, pack them and send them to you with out testing them. I thought maby the Independence was different?

[Hijacker]

deatschwerks puts out a good injector. AZHitman has been running a set of them on his KA-T for a long time now.

So long as they're side feed, they will fit your stock rail. And they should be the same impedence as the stock SR injectors.

[vanquish2]

They do fit.....and I am running D-werks as well.