Wideband Issues?

Nissan 300ZX technical discussion forum: Maintenance, performance, installations, modifications, how-to's and troubleshooting.
red coupe89
Posts: 112
Joined: Fri Aug 26, 2011 1:44 pm
Car: 1991 Fairlady Z
2005 Nismo Frontier 6spd 4x4
2000 Honda shadow ACE 1200

Post

so i installed my innovate wideband this weekend. the sensor was programed with clean oxygen as the instructions stated and placed just after the down pipe on the 1,3,5 bank. while the car is at temp and idle the gauge reads 10.3 which i understand to be rich. i turn my fuel pressure down to 20psi and it does not lean out. while stepping on the accel it continues to get rich. not sure if this is a problem in my wideband, ecu or some where else. im running a walbro 255 with 555rc injectors on factory rails. not sure where to go from here.


User avatar
NolimitZ32
Posts: 7042
Joined: Fri Jun 27, 2008 9:07 am
Car: 91 AG2 2+0 TTMT swap/E39 BMW 540i6/E53 4.6is Dinan S3
Location: Houston, TX

Post

Are you tuned for the 555s?

red coupe89
Posts: 112
Joined: Fri Aug 26, 2011 1:44 pm
Car: 1991 Fairlady Z
2005 Nismo Frontier 6spd 4x4
2000 Honda shadow ACE 1200

Post

ecu has been chipted from z1 for the 555s


Return to “300ZX (Z32) Technical”